"Nederman" aukšto vakuumo sistema

NEDERMAN VAC 20-1500 / FlexFilter DX

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, veikimo valandos: 158 h, rankos pasiekiamumas: 1 300 mm, Sveiki, Dcsdpfx Ansp E T N As Hoh parduodame demonstracinį UR10e robotą, kuris buvo naudotas koncepciniam tyrimui, tačiau vėliau šio tyrimo atsisakyta.

Gamybos metai: 1995, būklė: paruoštas naudoti (naudotas), Four dissolvers from various manufacturers are available. 1) Niemann NLD I, year of manufacture: 1995. 2) Vollrath VDSVY 15, year of manufacture: 1992, shaft length: 700 mm, disc diameter: 400 mm, tank volume: 400 L, tank diameter: 785 mm, tank height: 990 mm, outlet diameter: 45 mm. 3) Vollrath VDSVY 40, year of manufacture: 1991, tank volume: 400 L, speed: 1000 rpm, shaft length: 700 mm, disc diameter: 400 mm, machine dimensions (L/W/H): approx. 3200 mm / 800 mm / 1200 mm. 4) Pendraulik WDV 10, speed: 1800 rpm, shaft length: 985 mm, disc diameter: 275 mm, lift height: 1250 mm, machine dimensions (W/H): 560 mm / 3450 mm, weight: approx. 850 kg. An on-site inspection is possible. Dcjdpsvnuckjfx An Hsh

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2021, veikimo valandos: 95 h, keliamoji galia: 200 kg, kėlimo aukštis: 13 000 mm, statybinis aukštis: 2 100 mm, kuro tipas: elektrinis, pavaros tipas: Elektro, Lanksti teleskopinė platforma Techninė būklė: labai gera Priekinių padangų tipas: masyvios gumos Dedpfx Asvky D Son Hsch Priekinių padangų dydis: 600x190 Galinės padangos tipas: masyvios gumos Galinės padangos dydis: 600x190 Akumuliatoriaus įtampa: 48V CE sertifikatas,

Gamybos metai: 2002, būklė: naudotas, Diameter: 180 mm Workpiece length: 0 mm Dcsdpfx Aot Hw Shsn Hoh Workpiece width: 1350 mm Total power requirement: 65 kW Machine weight approx.: 7,500 kg Space requirement approx.: [to be completed] m T I M E S A V E R S (Netherlands) Wide-belt deburring and finishing grinding machine Model: 41 Series 1350 WRDOW-N Year of manufacture: 2002 Serial No.: 2313-03 --- Grinding width approx.: 1,350 mm Maximum workpiece height approx.: 1–50 mm Feed speed, stepless: approx. 1–10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, vacuum track 780 mm in the center of the belt; belt feed motor approx. 3 kW, frequency-controlled for stepless feed 1–10 m/min; tip switch for belt forward/reverse operation; digital display for belt speed and stepless table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11–22 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 3.) Vertical grinding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nylon fleece available in different grades, especially for deburring and cleaning surfaces and for edge rounding of workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 5.) Wet processing version = complete coolant system, consisting of band filter unit with pump integrated in the machine base, rotary union at the top of the deburring disc spindle, water return through the vacuum table, as well as water mist separator mounted above the machine with blower approx. 5.3 kW. Side doors made of stainless steel sheet. Oil skimmer, etc. 6.) Side-mounted control panel with user-friendly controls and digital position and speed display. Joystick for feed belt and table adjustment, 3x ammeters, etc., as well as workpiece pressure rollers at front and rear, emergency stop. Total drive approx.: 65 kW – 400 V – 50 Hz Weight: approx. 7,500 kg Required room height: approx. 3.50 m Condition: good – powered, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice

Būklė: naujas, Press pressure: 40 t Reach: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Through-hole in table: 210 x 170 mm T-slots: 22 mm Dedsb U Hwmepfx An Hsch Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Pneumatic clutch-brake combination by Ortlinghaus - Central lubrication by Vogel - Cam controller by Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Būklė: naudotas, Gamybos metai: 2008, mašinos/transporto priemonės numeris: 0-411-49-1873, Technical Data: - Manufacturer: Bütfering - Model: Optimat SGO 211/RC - Number of sanding units: 2 - Year of manufacture: 2008 - Working width: 1,100 mm - Sanding belt width: 1,120 mm - Sanding belt length: 1,900 mm - Workpiece thickness: 3–160 mm - Feed speed: 2.5–13 m/min - Weight: 1,800 kg - Table height adjustment Standard Equipment: - Automatic workpiece thickness adjustment - Infinitely variable feed speed via frequency converter - Up to 125 sanding programs can be stored - Wear-free braking device 1st Sanding Unit (R) - Calibration drum - Profiled steel contact roller - Diameter: 160 mm - Drive motor: 15 kW 2nd Sanding Unit (C) - Combination unit with roller and sanding shoe - Rubberized contact roller 65 Shore - Contact roller diameter: 160 mm - Electronic segmented pressure bar with 35 mm segment width - Belt speed: 12 and 21 m/s Dedpfx Asyh Hwusn Hech - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz - Compressed air consumption at 6 bar: 20 L/min - Belt blow-off device per impulse: 440 L/min - Extraction volume: approx. 2,880 m³/h at 20 m/s - Extraction connections: 1 x Ø 160 mm (sanding unit, roller) 1 x Ø 160 mm (sanding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Lakštų plotis 1550 mm Lakštų storis 6,5 mm Lenkimo spindulys 4,5 mm Dcjdpfsxabkbox An Heh Viršutinio volo skersmuo 150 mm Šoninio volo skersmuo 130 mm Apatinio volo skersmuo 150 mm Didžiausias atstumas tarp viršutinio ir apatinio volo 20,0 mm Bendras energijos poreikis 2,2 + 1,5 kW Staklių svoris apie 2370 kg. Matmenys (I x P x A) 3300 x 1150 x 1110 mm Demonstracinė staklė – NAUJA Nenaudota (!!) Speciali kaina pagal užklausą Įranga: - Elektrohidraulinė 4 volų lakštų lankstymo staklė * su varomais viršutiniu ir apatiniu volais * tvirta suvirinta konstrukcija - Pritaikymo sritis: * nuo lengvos iki sunkios lakštų apdirbimo (plienas/ALU/nerūdijantis plienas) - Apatinio ir šoninių volų elektrohidraulinis reguliavimas - Šoninių volų linijinis vedimas - Viršutinis volas varomas galingu elektros varikliu ir planetine pavara - Laisvai judantis atskiras valdymo pultas - Grūdinti volai SAE 1050 (CK 45), su išgaubimu - Kūginio lankstymo įtaisas - 3 ašių skaitmeninis indikatorius tiksliam volų padėties nustatymui - Elektrohidraulinis atverčiamas guolis - Naudojimo instrukcija (PDF)

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Specialized press designed from the ground up for briquetting iron, steel, and similar alloys. Features integrated oil collection mats. Does not include a packaging table—only briquette guides (rails) are provided. Comes standard with transparent bunker doors and oil heating elements. The machines are operated via Siemens KTP-400 touchscreens. 2nd generation available for purchase from February 2024. Please contact us first regarding this press! Technical Data: Throughput: Up to 600 briquettes/hour* Main motor: 30 kW Feed motors: 2.6 kW Cooling system: 1.6 kW Total power: 34.2 kW Oil tank: 260 liters Filters: 4 Length: 2000 mm Width: 2000 mm Height: 2200 mm Dsdpfstmugcjx An Hoch Weight: 3500 kg Briquette size: 40–110, D80 mm Warranty: 2 years / 2,000 operating hours

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, Single-Head Mitre Saw with Ascending Blade Ø 600 mm Dsdpfev I N Eyex An Hoch Single-head mitre saw with ascending Ø 600 mm blade, designed for precise and versatile cutting operations. - Worktable rotation: manual, up to ±20°, both right and left. - Pre-set angles: quick positioning at 90° and 45°. - Intermediate angle positioning: manual with pneumatic locking for any cutting angle. - DIGIT: equipped with a digital display for precise angle positioning. - MQL: minimum quantity lubrication system for efficient tool management. - Cutting unit rotation: up to ±20°. Technical Specifications - Blade diameter: 600 mm - Blade bore: 50 mm - Blade rotation speed: 2800 rpm - Motor power: 4 kW - Dimensions (W x D x H): from 920/1520 x 1320 x 1525/1800 mm - Weight: approx. 470 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Technische Daten: - Arbeitsbreite: 1350 mm - pneumatische Oszillation - Vakuumtisch - Stand-Alone-Maschine (Tisch höhenverstellbar) 1. Kombi-Einheit: - Motorleistung: 18,5 kW - Stahlkalibrierwalze - Stufenlose Bandgeschwindigkeitsregulierung - Sektionalpolster (52 Segmente à 26 mm) 2. Kombi-Einheit: - Sektionalpolster (52 Segmente à 26 mm) - Motorleistung: 7,5 kW - Stufenlose Bandgeschwindigkeitsregulierung - Bürste am Materialauslauf - Stufenlos einstellbare Vorschubgeschwindigkeit Dsdpfxevdtxio An Hsch - Pneumatische Reinigung der Bänder