Daugiavirmenės tekinimo staklės

MORI SEIKI NZ2000

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2009, veikimo valandos: 1 800 h, Funkcionalumas: visiškai funkcionalus, * Mori Seiki NZ 2000 T2Y. * APPROXIMATE VALUE OF INCLUDED EQUIPMENT: 40,000–45,000 euros. * Both spindles equipped with two Hainbuch high-precision collet chucks. * Facing spindle configuration. * 9-axis turning and milling center. * Twin spindles. * Spindle size A2-6. * 2 stacked turrets. * 2 C-axes. * 1 Y-axis. * Two integrated 22 kW motors. * Milling motor power: 7.5 kW. * Two Renishaw automatic tool measurement arms. * Conversational automatic programming system Mapps 4. * Automatic load monitoring and tool consumption monitor. * Tool life management and consumption monitoring. * Dual pedal for chuck open and close. * Oil cooler for both spindles. * 340 Nm cutting torque. * Both turrets have 16 stations each, all are powered. * Capability for up to 32 tools per turret. * Interface for bar feeder installation. * Automatic rear parts catcher with special gripper for long parts. * Large set of external and internal toolholders. * Extensive set of axial and radial driven tool blocks. * MQ system for tool clamping. * Maximum turning diameter: 320 mm. * Turning length: 810 mm. * Mori Seiki MSX-701 III control. * Max. spindle–subspindle distance: 1130 mm. * Main spindle speed: 5,000 rpm. * Subspindle speed: 5,000 rpm. * Driven tool speed: 6,000 rpm. Dodjx Ab Niepfx Admocr * Max. bar diameter: 65 mm. * X1 travel: 210 mm. * Y1 travel: +65 / -45 mm. * Z1 axis travel: 300 mm. * X2 travel: 210 mm. * Z2 travel: 810 mm. * Subspindle slide: 920 mm. * Rapid traverse X1, X2: 30,000 mm/min. * Rapid traverse Y1: 20,000 mm/min. * Rapid traverse Z1, Z2: 50,000 mm/min. * C-axis resolution: 0.001°. * Hinged belt type side chip conveyor. * Communication ports via USB, PCMCIA card and RS-232. * Machine weight: 8,300 kg. * Machine can be inspected in operation. * Includes electrical transformer, documentation, parts list, electrical diagrams, programming and operation manuals. * IMPORTANT: Never used with bar feeder, only for aluminium prototype machining. * VERY few cutting hours. * Immediate delivery unless pre-sold.

Gamybos metai: 2008, Sąlyga: visiškai atnaujintas (naudotas), Schwinguntergestell: 800 mm Dcjdpfx Adjxuguuomor Schwenkquerschlitten: 800 mm Maximaler Abstand zwischen den großen Spindelaufnahmen: 1.130 mm Maximaler Bearbeitungsdurchmesser: 320 mm Maximale Drehlänge: 810 mm Stangendurchlass: 52 mm X1-, X2-Achse: 210 mm Y1-Achse: 110 mm (+65, -45) Y2-Achse: 110 mm (+45, -65) Z1-, Z2-Achse: 810 mm B-Achse (Spindel 2): 920 mm CNC-Steuerung: MSX-701 III Spindel 1, 2 Max. Spindeldrehzahl 1, 2: 6.000 1/min Spindelaufnahme 1, 2: JIS A2-5 Spindeldurchlass 1, 2: 61 mm Revolverkopf: 16 Stationen x 2 Max. Werkzeugspindeldrehzahl motorisiert: 6.000 1/min Verfahrgeschwindigkeit x1, x2: 30.000 mm/min Verfahrgeschwindigkeit y1: 20.000 mm/min Verfahrgeschwindigkeit z1, z2: 50.000 mm/min

Sąlyga: naudotas, Gamybos metai: 2011, Maximum turning diameter: 320 mm Maximum turning length: 810 mm Control system: MSX-701 IV Swing diameter over bed: 800 mm Swing diameter over cross slide: 800 mm Distance between centers: 1,130 mm Maximum spindle speed: 5,000 rpm Main spindle drive power: 25 / 22 kW Maximum torque: 358 Nm Spindle diameter at front bearing: 120 mm Spindle bore: 73 mm Maximum usable bar diameter: 65 mm C-axis: 0.001° Spindle nose: JIS A2-6 Collet chuck: 160 mm Maximum spindle speed: 5,000 rpm Counter spindle drive power: 25 / 22 kW Maximum torque: 358 Nm Spindle diameter at front bearing: 120 mm Spindle bore: 73 mm Maximum usable bar diameter: 65 mm C-axis: 0.001° Spindle nose: JIS A2-6 Collet chuck: 160 mm Number of tool stations: 16 positions Number of driven tool stations: 16 positions Speed range – driven tools: max. 6,000 rpm Drive power – driven tools: 7.5 / 5.5 kW Y-axis: 110 mm Shank diameter: 20 x 20 mm Drill shank diameter: 32 mm Turret indexing time: 0.18 sec Number of tool stations: 16 positions Number of driven tool stations: 16 positions Speed range – driven tools: max. 6,000 rpm Drive power – driven tools: 7.5 / 5.5 kW Shank diameter: 20 x 20 mm Drill shank diameter: 32 mm Turret indexing time: 0.18 sec X-travel 1/2: 210 mm Y-travel: 110 mm Dcjdev E R E Nepfx Admor Z-travel 1/2: 810 mm Counter spindle B-axis travel: 870 mm Rapid traverse (X / Y / Z) 1: 30 / 20 / 50 m/min Rapid traverse (X / Y / Z) 2: 30 / - / 50 m/min Feed rate: 0 - 5,000 mm/min Total power requirement: 94 kVA Machine weight: approx. 8.3 t Space requirement: approx. 10.0 x 3.0 x 2.5 m CNC Turning and Milling Center MORI SEIKI - NZ 2000 T2Y - Main and counter spindle - 2 turrets, upper and lower - Y-Axis - 2x 16 driven tool positions

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 810 mm, sukimosi skersmuo virš skersinio stumduko: 800 mm, tekėjimo skersmuo: 320 mm, ašies variklio galia: 25 000 W, veleno greitis (maks.): 5 000 aps./min, veleno skylė: 73 mm, X ašies eiga: 210 mm, Y ašies eiga: 110 mm, Z ašies eigos atstumas: 810 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 20 m/min, greitasis eiga Z ašyje: 50 m/min, sukimosi greitis (maks.): 6 000 aps./min, CNC FANUC MSX-701 / MAPPS IV CAPACITIES Swing Diameter Over Bed: 800 mm Swing Diameter Over Cross Slide: 800 mm Maximum Turning Diameter: 320 mm Standard Turning Diameter: 200 mm Maximum Distance Between Centers: 1,130 mm Maximum Turning Length: 810 mm Maximum Workpiece Dimensions: 300 mm TRAVELS Turret Axis X1 & X2: 210 mm Turret Axis Y1 & Y2: +65 / -45 mm Turret Axis Z1 & Z2: 810 mm Head Axis B2: 920 mm MAIN SPINDLE Maximum Spindle Speed: 5,000 rpm Motor Power (30 min / continuous): 25/22 kW Maximum Bar Machinable Diameter: 65 mm Spindle Bore: 73 mm Spindle Front Bearing Diameter: 120 mm Spindle Nose: JIS A2-6 C-Axis Resolution: 0.001° SUBSPINDLE Maximum Speed: 5,000 rpm Motor Power (30 min / continuous): 25/22 kW Maximum Bar Diameter: 65 mm Spindle Bore: 73 mm Spindle Front Bearing Diameter: 120 mm Spindle Nose: JIS A2-6 C-Axis Resolution: 0.001° Djdpewlvlgjfx Admecr FEED RATES Turret 1 Rapid Traverse X/Y/Z: 30/20/50 m/min Turret 2 Rapid Traverse X/Y/Z: 30/20/50 m/min TOOL TURRETS Number of Turrets: 2 Number of Tool Stations per Turret: 16 Turning Tool Shank Cross Section: 20 x 20 mm Max Boring Bar Diameter: 32 mm Turret Indexing Time (1 station): 0.18 s Max Speed of Driven Tools: 6,000 rpm Driven Tool Motor Power (5 min / continuous): 7.5/5.5 kW DIMENSIONS Installation Area with Chip Conveyor: 5,120 x 2,720 mm Net Weight: 8,300 kg Machine equipped with: • High-pressure coolant system • Interface for bar feeder • Gantry parts unloading arm • Tool load monitoring and load management system • 1 double radial driven tool holder • 3 axial driven tool holders • 2 external tool holders • 2 double boring bar holders • 2 single radial driven tool holders • 2 internal boring bar holders • 2 Kitagawa BD 208 self-centering chucks, Ø 210 mm • 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration Year of manufacture: 2010

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, 1 vnt. naudotas CNC tekinimo staklės Mori Seiki NZ 2000 su C ašimi ir varomais įrankiais. Papildomi techniniai duomenys ir nuotraukos bus pridėti. Dcjdpfx Adjxb T Uzjmjr