Horizontalios tekinimo staklės

MORI SEIKI NL 2500 SY (2007)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, TECHNICAL DETAILS: - CNC Control: MSX 803III - X Axis travel: 260 mm - Z Axis travel: 590 mm - Y Axis travel: +/- 50 mm - Maximum Turning Diameter: 356 mm - C Axis increment: 0.001° - Maximum Turning Length: - Cutting Feed Rate (X, Z, Y): - Swing Over Bed: - Swing Over Carriage: - Bar Capacity: Ø 65 mm (main) - Rapid Traverse Max. (X, Z): - Main Spindle: 12” - Spindle Speed: 5,000 rpm - Spindle Power: 18.5 kW - Torque (Nm): - Main Spindle Bore: - Main Spindle Nose: A2-6 Lodpfowdrfgox Ah Tohp - Sub Spindle - Spindle Speed: 6,000 rpm - Spindle Power: 11 kW - Torque (Nm): - Sub Spindle Bore: - Sub Spindle Nose: A2-5 - Turret Positions: 12 - Number of Driven Tool Stations: 12 - Driven Tool Speed: 6,000 rpm - Driven Tool Power: 5.5 kW EQUIPMENT: - Chip Conveyor - Three-color Status Lamp - Fixed Tool Holders - Parts Catcher MACHINE DIMENSIONS: - Length: 2,705 mm - Width: 2,000 mm - Height: 2,120 mm - Weight: 5,800 kg

Sąlyga: naudotas, Gamybos metai: 2014, Swing diameter over bed: 508 mm Turning length: 724.5 mm Control: Hurco Ultimax Swing diameter over cross slide: 336 mm Lhjdjv T Np Ajpfx Ah Top Spindle speeds – stepless: 0–4500 rpm Spindle bore: 65 mm Feed rates: 0–30 m/min Rapid traverse in X and Z axis: 30 m/min Operating voltage: 400 V Connected load: 30 kVA Cross slide travel: 203.2 mm Longitudinal travel: 580/640 mm Space requirement approx.: 4.3 x 2.1 x 2.6 m Tool speeds: 0–5000 rpm Tool drive power: 5.5 kW Main spindle motor: 15/22 kW Machine weight approx.: 5.6 t C-axis: 360° x 0.001° increments Equipped with a 12-station turret with driven tool positions (C-axis), sub-spindle, power chuck, coolant system, and chip conveyor. Control: Hurco Ultimax. Supplied with extensive accessories.

Gamybos metai: 2000, Sąlyga: paruoštas naudoti (naudotas), Makino EU 64 Wire EDM Machine X = 600 mm Y = 400 mm Z = 260 mm Maximum workpiece dimensions (W x D x H): 940 x 650 x 260 mm Maximum workpiece weight: 1,500 kg Lhedpfx Ahjgwp Eqs Tep Service required before commissioning! The current Makino service report can be provided upon request.

Gamybos metai: 2011, veikimo valandos: 23 747 h, Sąlyga: paruoštas naudoti (naudotas), Allgemeine Daten Maschinengewicht: 5650 kg Lsdpfxewn N Rbs Ah Tohp Steuerung Hersteller: FANUC Modell: 31i Model A Hauptantrieb Spindeldrehzahlbereich: 6000 min⁻¹ Spindelmotorleistung: 11/7,5 kW Revolver Anzahl der Revolver: 2 Anzahl der Werkzeugplätze pro Revolver: 12 Medien Späneförderer: Ja Zusätzliche Ausstattung Stangenlader TOP AUTOMAZIONI FU 342 Diese 3-achsen NAKAMURA-TOME WT-100 Drehmaschine wurde 2011 gebaut. Sie verfügt über eine CNC-Steuerung FANUC 31i Model A, eine Drehlänge von 503 mm und einen maximalen Drehdurchmesser von 190 mm. Die Maschine ist mit zwei angetriebenen Revolvern mit je 12 Werkzeugstationen, einer Stangendurchlasskapazität von 42 mm sowie einem Stangenlader TOP AUTOMAZIONI FU 342 ausgestattet. Wenn Sie hochwertige Drehbearbeitung suchen, empfehlen wir Ihnen die NAKAMURA-TOME WT-100, die wir zum Verkauf anbieten. Kontaktieren Sie uns gerne für weitere Informationen. Anwendungsbereiche Drehen

Sąlyga: geras (naudotas), Gamybos metai: 2007, - SIEMENS 840 D control system - Bar passage: 65 mm - Main and sub-spindle, max. speed 5,000 rpm - C-axis, Y-axis - 3 turrets with 12 stations each (all driven) - Driven tool speed: 4,000 rpm Lhsdeuw Izvspfx Ah Tep - Tool holder: VDI 30 with drive DIN 5480 TRAVEL PATHS X1 = 165 mm, Z1 = 220 mm X2 = 165 mm, Z2 = 150 mm X3 = 165 mm, Z3 = 650 mm, Y3 = 80 mm (+50/-30) ACCESSORIES Coolant system Chip conveyor Bar loader TOP Automazioni XF 375

Gamybos metai: 1974, Sąlyga: naudotas, Druck: 340 t Hublänge: 200 mm Tischgröße (unten): 100 x 800 mm Abstand zwischen Ober- und Untertisch: - offen: 510 mm (Lichtöffnung) Lhodpfxo Du Uwo Ah Tjp - geschlossen: 310 mm Neue Hydraulik- und Elektrikanlagen

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, veikimo valandos: 1 730 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 760 mm, sukimosi skersmuo virš skersinio stumduko: 780 mm, tekėjimo skersmuo: 376 mm, ašies variklio galia: 22 W, veleno greitis (min.): 20 aps./min, veleno greitis (maks.): 4 000 aps./min, veleno skylė: 82 mm, X ašies eiga: 260 mm, Y ašies eiga: 105 mm, Z ašies eigos atstumas: 830 mm, tvirtinimo skersmuo: 24 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 10 m/min, greitasis eiga Z ašyje: 30 m/min, strypo praėjimas: 80 mm, tvirtinimo įvorės skylė: 80 mm, Strypo skersmuo (maks.): 80 mm, CNC Turning-Milling Center Doosan Puma 2600 SYII with Fanuc i Series Control including Accessories The machine has been used very little, with approximately 1,730 power-on hours, so it is as good as new and will be available from 01.01.2026. Additional accessories for the Doosan Puma 2600 SY II lathe: - 2 tool holders for external turning tools 25x25 - 1 double tool holder for external turning tools 25x25 - 1 tool holder for face machining 25x25 - 2 tool holders for internal turning tools (boring bars) diameter 50 mm - 1 double tool holder for internal turning tools diameter 32 mm - 1 parting tool holder - 1 double right-hand tool holder for external tool (sub-spindle) - 1 double left-hand tool holder for external tool (main spindle) - 4 driven tool holders ER-32 radial (X axis) - 5 driven tool holders ER-32 axial (Z axis) - 1 driven tool holder ER-32 radial (X axis) with internal coolant supply - 1 driven tool holder ER-32 axial (Z axis) with internal coolant supply - 1 three-jaw chuck for main spindle with 1 set of hardened jaws + 2 sets of soft jaws - 1 three-jaw chuck for sub-spindle with 1 set of hardened jaws + 2 sets of soft jaws - 1 collet chuck for main spindle + one collet each diameter 50 mm + 30 mm - 1 collet chuck for sub-spindle + one collet each diameter 50 mm + 30 mm - 1 set of reduction sleeves for diameter 50 (10 pieces) - 1 set of reduction sleeves for diameter 32 (7 pieces) - 1 set of adapters for driven tool holders (ER 32 collet, Weldon, milling arbor) Ljdoxauwbopfx Ah Tohp - Flushing device with emulsion on main spindle for automatic cleaning of chuck jaws - Device for automatic cleaning of chuck jaws with compressed air - Additional high-pressure pump for internal coolant supply (for drilling with indexable insert drill) - Function for automatic machine shutdown (the machine also switches off the main switch, thus disconnecting the power supply) - Connection for automatic bar feeder magazine Iemca

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, veikimo valandos: 1 139 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 599 mm, tekėjimo skersmuo: 530 mm, ašies variklio galia: 11 000 W, veleno greitis (min.): 50 aps./min, veleno greitis (maks.): 6 000 aps./min, veleno skylė: 56 mm, X ašies eiga: 530 mm, Y ašies eiga: 100 mm, Z ašies eigos atstumas: 599 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 15 m/min, greitasis eiga Z ašyje: 30 m/min, Outstanding machine with the option for integration with a brand new IEMCA Master 52 bar feeder, featuring only 1,100 operating hours. Multitasking capability enables simultaneous milling and turning operations. Rugged and precise construction with a rigid cast iron frame. Dual tool magazines: Revolver turret plus an internal magazine housing an additional 12 CAPTO tools stored securely inside, 12 tools mounted on the turret, and 6 hybrid square 25 mm tool holders (refer to the attached technical data sheet). Twin spindle design allows for secondary operations. Equipped with Fanuc 0i-TF CNC and Manual Guide. Includes Tool Overload Detection System (automatic tool overload monitoring). Full documentation provided. Also equipped with transformer, chip conveyor, 15-bar coolant pump, presetting device, parts catcher and finished part output conveyor, and work lamp. Lsdpfevv Tvfex Ah Tehp

Gamybos metai: 1975, Sąlyga: labai geros būklės (naudotas), Bell shape: round Bell opening: 525 mm Bell depth: 620 mm Volume: 170 litres Loading weight: max. 150 kg Ljdjfgd S Nopfx Ah Tjhp *With timer control 0-60 min.*

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 205 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 1° - Number of toolholder blocks: 1 TOOLHOLDER BLOCK 1 - Number of positions: 12 - Number of driven positions: 8 - Driven tool speed: 7,000 rpm FRONT TOOL POST - Number of positions: 7 SUB OPERATION TOOL POST - Number of positions: 8 - Number of driven positions: 8 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY Lhsdswcg Tispfx Ah Tjp - Supply voltage: 400 V - Total power: 7 kW WEIGHT AND DIMENSIONS - Footprint: 2334 x 1200 mm - Machine height: 1700 mm - Machine weight: 2,600 kg OPERATING HOURS - Power-on hours: 57,342 h - Operating hours: 31,575 h - Spindle hours: 24,829 h ACCESSORIES - Control: Fanuc 31i-B - Driven guide bushing - Chip conveyor - Parts catcher - Parts conveyor - Parts ejector - Coolant tank - Bar feeder: FMB turbo 3-26 - Electrical transformer