Miyano BX-26S

Miyano BX-26S

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Miyano BX-26S CNC Lathe TECHNICAL DATA Clamping Units Collet machine with main and sub-spindle: 26 mm Max. turning length with workpiece gripper: 67 mm Maximum part length: Max. 300 mm / Ø 26 Clamping cylinder L/R spindle: Stationary Max. drilling diameter L/R spindle: Ø 12.00 mm Max. thread diameter L/R spindle: M8 Spindle Motor power: VAC 2.2/3.7 kW Spindle speed range L/R spindle: 80 ~ 8,000 rpm L spindle travel Z1-axis: 70.00 mm R spindle travel X2-axis: 180.00 mm R spindle travel Z2-axis: 238.00 mm Tool Slide Tool slide: Vertical linear slide Number of tool stations: 16.00 Tool positions slide 1: 6/4 Tool shank size: 16.00 mm Tool holder internal: Ø 20.00 mm X1-axis travel: 135.00 mm Y1-axis travel: 260.00 mm Number of turning tools (L-spindle) X-/Y-unit: 2/2 (For use with L/R spindle) Z-unit: 2+2 Speed range: 100 ~ 4,000 rpm Powered tool motor: 0.5 kW / 0.5 kW Driven tools max. drill: 8.00 mm Driven tool motor max. drill diameter: M6 Tool Slide 2 Tool slide: Vertical linear slide Number of tool stations: 7.00 Tool positions slide 2: 3/4 Tool shank size: 16.00 mm Tool holder internal: Ø 20.00 mm Y2-axis travel: 215.00 mm Machine Dimensions Machine height: 1,670.00 mm Hjdpfx Afox Emmhj Uel Footprint (W x D): 2,320 mm × 1,335 mm Machine weight: 3,000.00 kg No guarantee is given for the correctness, completeness, or up-to-dateness of the information provided.

Būklė: naujas, Suction capacity at filter unit nozzle*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte Hsdpfxsh Rdwxs Af Usl *Depending on filter configuration Special voltages or special colours available on request Application: Extraction of oil mist and smoke, suitable for small to very large machine workspaces | Oil mist separator Advantages of the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC as standard (digital filter control) - Electronically regulated EC fan as standard - Adjustable speed and air flow - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of air flow capacities available - Can be adapted to pollutant load and air flow requirements - Extensive range of installation and connection accessories - Quality Made in Germany We developed the ELBARON® filter series for use in metalworking with straight oil or for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most powerful filters on the market and are used worldwide. Our filter units are already fully digitalized as standard and can, for example, be controlled via laptop. The ELBARON® product range includes 18 device variants and can be optimally configured in terms of size and capacity for your specific application. ELBARON® units impress with long service life and total operational reliability. Our electrostatic filter cells are dimensioned to provide the best possible filtration efficiency, service life, and trouble-free operation while maintaining economic efficiency.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1996, Bendrieji duomenys Įrenginio svoris: 2200 kg Aukštis: 1700 mm Gylis: 1200 mm Matmenys Hjdsx D Dwfopfx Af Uol Įrenginio ilgis: 2200 mm Ši 3 ašių Star SR 20 R III staklė pagaminta 1996 m. Didžiausias tekinimo skersmuo – 20 mm, veleno apsukos iki 8 000 aps./min., greito paėmimo greitis 35 m/min. Idealiai tinka preciziškam tekinimui – turi šešias fiksuotas tekinimo įrankių pozicijas ir penkias radialines varomų įrankių stotis. Jei ieškote aukštos kokybės tekinimo galimybių, apsvarstykite mūsų siūlomą Star SR 20 R III įrenginį. Susisiekite dėl daugiau informacijos. Pritaikymo sritys Tekinimas

Būklė: beveik kaip naujas (parodų įrenginys), Various versions available, such as round, hexagonal, or square, in smooth finish, cross-grooved design, or with longitudinal and transverse grooves. A current list of available as-new and new clamping heads SK32/SK42/SK52/SK65/SK80/SK100 can be found on our website. Hedpfx Ajh Dmamof Uol We look forward to your inquiry. STALEX Werkzeugmaschinen GmbH

Gamybos metai: 1987, būklė: naudotas, Kehren Rotary Table Type RS 7C, used Manufacturer: Kehren, Honneff Ref.: 4179 Year of manufacture: 1987 Hodpfshgmwgox Af Uol Control: Siemens 3G PLC: Siemens S5 Grinding motor: BBC QUB 200 Rotary table diameter: 750 mm Grinding head diameter: 460 mm Operator panel with screen Coolant system Flush pump Coolant pump Automatic paper band filtration system Control cabinet

Būklė: geras (naudotas), Gamybos metai: 2007, Naudojamas OKUMA tekinimo staklės - Modelis: LT200-M TwinStar - Gamybos metai: 2007 - su drožlių transporteriu - aušinimo skysčio baku - iš karto prieinama Hodev S Svvjpfx Af Uol

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, CNC Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Max. machining diameter: 32 mm Max. machining length: 320 mm with 1 collet Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis resolution: 0.001° Sub spindle speed: 200–8,000 rpm Max. clamping diameter, sub spindle: 32 mm Max. front drilling diameter: 12 mm Max. front tapping capacity: M10 Max. rear tapping capacity: M10 Spindle through bore diameter: 37 mm Number of mountable tools: up to 25, depending on type Rapid traverse X/Y/Z axes: up to 32 m/min Bar length: 2,500 mm Coolant tank capacity: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory size: 5120 m / 2,048 kB Minimum input unit: 0.1 µm Interface: RS232C Number of programs: 63 Tool offsets: 32 pairs X1: 108 mm Y1: 347 mm Z1: 325 mm Hodpfx Aoydaadjf Ujl X2: 120 mm Y2: 44 mm Z2: 212 mm X3: 313 mm Z3: 430 mm A3: 150 mm A4: 1,500 mm No guarantee is given for the correctness, completeness or accuracy of the information provided.

Būklė: naudotas, Gamybos metai: 2003, Sukimos skersmuo 190 mm Sukimos ilgis 620 mm Valdymas Fanuc Series 18i-TB Hedpfexiy Auex Af Ujl Bendras galingumo poreikis 15 kW Staklių svoris apie 13,5 t Užimamas plotas apie 5350x3350x2395 mm CNC tekinimo ir frezavimo centras NAKAMURA TOME Super NTJ Pagaminimo metai 2003 Valdymas Fanuc Series 18i-TB - Pagrindinis velenas turi būti kapitališkai remontuotas. - Viršutinė revolverinė galva modernizuota Turbo G42 oro pavara varomu velenu (60 000 aps./min) ir valdymo bloku GTR 3. Ašių kiekis: 9 Revolverinių galvų kiekis: 2 Maks. tekinimo skersmuo: 190 mm Maks. tekinimo ilgis: 620 mm Strypo pratekėjimas: iki 65 mm Maks. sukimosi skersmuo virš lovos: 190 mm Velenų kiekis: 2 (pagrindinis ir priešpriešinis) Veleno tvirtinimas: A2-6 Variklio galia: 15 kW Maks. apsukos: 60 000 aps./min X ašis: 345 mm Y ašis: +/- 45 mm Z ašis: 1240 mm B ašis: +/- 91° viršuje, pilnai servovaldoma, 0,001° Strypo pratekėjimas: D 65 mm - 12 padėčių revolverinė galva varomiems įrankiams - 24 padėčių revolverinė galva tekinimo įrankiams (dvigubų laikiklių technologija) - Su daugybe priedų - 2 x Hainbuch HB griebtuvai

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, Traub TNL 18-7B CNC Automatic Lathe Base Machine: 2441 x 1396 mm Weight: 3800 kg Spindle height above floor: 3800 mm Connected load: 24 kW Main Spindle Max. bar capacity: 18 mm Max. spindle speed: 12,000 rpm Corner speed: 5,000 rpm Travel Z: 205 mm Rapid traverse: 40 m/min Measuring system resolution Z: 0.001 mm Feed force: 3,000 N Spindle nose / short taper: Traub short taper mount Max. clamping force: 1,400 daN Max. clamping pressure: 40 bar Min. clamping pressure: 7.5 bar Piston area: 40 cm² Total cylinder stroke: 5 mm Clamping tube thread: M25 x 1 Counter Spindle Workpiece diameter: 21 mm Workpiece clamping depth: 180 mm Max. spindle speed: 12,000 rpm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. clamping pressure: 30 bar Min. clamping pressure: 10 bar Upper Tool Turret with B-Axis Number of stations: 8 Tool shank cross-section, turning tools: 16 x 16 mm Travel: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool-to-tool change time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower Tool Turret Number of stations: 7 + counter spindle Tool shank cross-section, turning tools: 16 x 16 mm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool-to-tool change time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Driven Tool System for Upper Turret Number of driven stations: max. 8 Drive power: 2 kW Max. speed: 12,000 rpm Torque: 3.9 Nm Driven Tool System for Lower Turret Number of driven stations: 7 + counter spindle Drive power: 3.4 kW Hodpfx Afewg Takj Usl Max. speed: 12,000 rpm Torque: 7.3 Nm Driven Tool System, Backworking Unit Number of stations: 7 Number of driveable stations: max. 3 Pitch distance: 46 mm Drive power: 2 kW Max. speed: 7,500 rpm Torque: 4.7 Nm Drive power: 2 kW Max. speed: 4,000 rpm Torque: 11.8 Nm SCOPE OF DELIVERY Includes (not an exhaustive list): - Traub CNC lathe - Tool holders, driven and non-driven - High-pressure and band filtration system - Oil mist separator - Fire suppression system - Chip conveyor - Bar feeder - Operating documentation Full scope of delivery according to photo series No guarantee for the accuracy, completeness or timeliness of the information provided.

Būklė: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. processing length: 205 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 1° - Number of bush holders: 1 Hsdexlum Tspfx Af Uel BUSH HOLDER 1 - Number of positions: 10 - Number of driven positions: 4 FRONT TOOL POST - Number of positions: 7 SUB-OPERATION - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 7 kW WEIGHT AND DIMENSIONS - Footprint: 2,200 x 1,200 mm - Machine height: 1,700 mm - Machine weight: 2,200 kg MACHINE HOURS - Power-on hours: 34,143 h - Operating hours: 26,657 h - Spindle hours: 15,552 h EQUIPMENT - Control: Fanuc 30i-model A - HFT (High Frequency Turning) - Driven guide bushing - Parts catcher - Parts conveyor belt - Parts ejector - Coolant tank - Bar feeder: FMB turbo 3-26 / 3200 A