Centrinė tekinimo ir veleno tekinimo staklės

MEUSER M 0 L

Būklė: geras (naudotas), Centre height: 205 mm Centre distance: 1500 mm Swing diameter over bed: 410 mm Spindle bore: 47 mm Spindle mount: Size 6 Tailstock taper: 4 MT Spindle speeds: 28 - 1250 rpm Feeds: longitudinal/cross 0.03-1.3/0.008-0.33 mm/rev Thread pitches: 0.25 - 76 mm Iodpfx Abov Du Ixo Ssap Electrical connection: 380 V, 3 kW Required space: 2800 x 1100 x 1600 mm Weight: 1330 kg

Būklė: naujas, Gamybos metai: 2023, Highly efficient series production Clamping – Enter cutting size – Start. Automatic saws with loading systems are a standard for efficient series processing of bar and bundle material. Maximum cutting range up to 290 x 320 mm. Features - Automatic hydraulic sawing machine with NC control - For cuts from 0° to 60° right, compliant with all CE safety standards - The machine features 9 programs, each consisting of up to 99 individual steps, totaling approximately 890 cutting positions, with a corresponding piece counter - Functions: Material feed, closing of the fixed vice, blade rotation, distribution of emulsifiable coolant, bow descent until the end of the cut, return of the feed carriage to the set position, bow reset, and blade rotation stop via coolant distribution, cycle repetition - Hydraulic feed, cut by cut, with no longitudinal dimension limit - Numerical control of quantity and cut length - Hydraulic control panel with adjustable cutting pressure - Blade tension is monitored electromechanically via microswitch - Device with brush for band cleaning - Bimetallic band 3200 x 27 x 0.9 mm - Cutting thickness 1.2 mm - Material feed stroke: 600 mm - Hydraulic power unit motor: 0.75 kW - Electric pump: 0.09 kW for blade cooling You are welcome to inspect the system at any time in our production/demo hall. Please feel free to contact us regarding this. Plantec Maschinen GmbH Iodofww Sqepfx Ab Soap

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested to H3, residual dust content less than 0.1 mg/m³ High extraction performance with a small footprint Maximum power in this class Very quiet Application Area: Clean air extraction units for wood chips and wood dust Iaodpfx Abecnw U De Ssp Designed for commercial use Suitable for all woodworking machines with a matching extraction port diameter Can also be used for several dust sources High-quality, well-conceived construction Robust and compact housing made of galvanized sheet metal Extraction port can be easily converted from left to right, allowing for flexible use Large access openings for maintenance Large, mobile chip containers with clamping lever and chip collection bag Unit delivered fully assembled, ready for immediate use Mobile Filter Description: Ultra-compact with maximum filter surface area Filter media made of polyester fleece, aluminum vapor-coated, washable for extended service life Filters are standard in antistatic design, tested and approved to Category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning light on control panel The fan is positioned downstream of the filter Equipment Features: With innovative locking device for safe container positioning All units in this series are dust-tested to H3, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Access opening for cleaning the bypass filter Connection cable 5 m with 5-pin CEE plug and phase inverter 2 fixed casters and 2 swivel casters with brakes Pre-wired for connecting machine recognition for up to 8 machines and slide valve controls Manual filter cleaning Sound pressure damper available as an accessory Model: RLA 125 M Article No.: 5131256 Technical Data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Rated airflow: 1095 m³/h Max. airflow: Negative pressure at rated airflow: Filter surface: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Būklė: naujas, Gamybos metai: 2026, The TYTAN CENTER 750 Vario lathe-milling machine combines two machines into one unit for enhanced user convenience and space-saving in the workspace. It features stepless spindle speed control for both the lathe and milling operations. Turning capacity: 250x750mm, 0.75 kW/230V; Milling capacity: 0.6 kW/230V. Lathe functions include: external and internal cylindrical surface machining, threading, and cutting of workpieces. Milling functions include: slot milling, drilling, and reaming. This machine is ideal for small-scale industrial enterprises, workshops, garages, etc. Main machine advantages: - Combination of two functions—turning and milling—in one compact design. - Separate spindle motors for the lathe and mill, each with stepless speed regulation, enabling independent operation. - LCD displays for accurate speed monitoring and precise spindle speed adjustment. - Two spindle speed ranges to suit various materials and machining methods. - Complex workpiece machining—no need for reclamping between machines. - Rigid dovetail guideways—for high stability during milling. Technical specifications: LATHE - 3-jaw chuck: 125 mm - Swing over bed: 250 mm - Swing over cross slide: 150 mm - Distance between centers: 750 mm - Bed width: 135 mm - Spindle bore: 29 mm - Spindle taper: MT4 - Spindle speed control: Stepless (2 ranges) - Spindle speeds: 50–1125 / 100–2250 rpm - Metric threads: (18) 0.2–3.5 mm - Imperial threads: (21) 8–56 TPI - Longitudinal feed: (6) 0.07–0.4 mm/rev - Compound rest size: 65 x 65 x 20 mm - Max. tool dimension: 12 x 12 mm - Top slide travel: 70 mm - Cross slide travel: 130 mm - Longitudinal travel: 630 mm Iaedjw H Rdmspfx Ab Ssp - Tailstock quill diameter: 30 mm - Tailstock quill travel: 70 mm - Tailstock taper: MT2 - Motor power (S1/S6): 0.75 / 0.9 kW / 230 V MILLING MACHINE - Max. drilling diameter: 16 mm - Spindle quill taper: MT2 - Quill travel: 50 mm - Head tilt: –90° to +90° - Spindle–column distance: 170 mm - Spindle–table distance: 43–250 mm - Spindle speed range: 50–2250 rpm - T-slot size/number: 2 x 8 mm - Motor power: 0.6 kW / 230 V GENERAL PARAMETERS - Machine dimensions (LxWxH): 1350 x 580 x 1630 mm - Weight: 230 kg Standard equipment: - 125 mm 3-jaw lathe chuck with reversible jaws - Machine base - Fixed centers MT2 and MT4 - Drill arbor and chuck MT2/B16 - Change gears - Set of wrenches, oil can, service tools - CE-compliant guards

Būklė: geras (naudotas), Gamybos metai: 1956, Heavy-duty lathe, lathe, engine lathe, lead screw and feed shaft lathe - Manufacturer: Weisser, Lead Screw and Feed Shaft Lathe Type PF200 - Turning length: 1340 mm Iasdpetzf N Refx Ab Sjp - Swing diameter over bed: 420 mm - Swing diameter over cross slide: 240 mm - Spindle bore: Ø 41 mm - Spindle speeds: 31.5 - 1400 rpm - Three-jaw chuck: Röhm Ø 250 mm - Accessories: included, see photos - Tailstock quill taper: MT4 - Drive motor: 2.5/3.5 kW - Dimensions: 2670/1000/H1230 mm - Weight: 1450 kg

Būklė: naudotas, Lathe for metal Iaodpfxsrdmm Ds Ab Ssp

Būklė: geras (naudotas), Gamybos metai: 1956, Sunkioji tekinimo staklės, tekinimo staklės, tekinimo suolas, priekinės ir galinės ašies tekinimo staklės - Gamintojas: Meuser, priekinės ir galinės ašies tekinimo staklės tipas M3A - Tekinimo ilgis: 1400 mm - Tekinimo Ø virš lovos: 550 mm - Tekinimo Ø be lovos: 800 mm - Tekinimo Ø virš suporto: 300 mm - Špindelio skylė: Ø 58 mm - Špindelio apsisukimai: 15 - 810 aps./min Iaodpsh Uuzyefx Ab Sep - 3 žandikaulių griebtuvas: Röhm Ø 250 mm - Diskinė plokštuma: 500 mm - Priedai: įskaitant įrankių laikiklį/įrankius, žr. nuotraukas - Galinės atramos tvirtinimas: MK5 - Matmenys: 2770/1160/H1310 mm

Būklė: geras (naudotas), Gamybos metai: 1988, mašinos/transporto priemonės numeris: 1669-110-1406, Offer 25094 Technical Data: - Drilling capacity in steel ST 60: 50 mm - Maximum drilling diameter in steel ST 60: 60 mm - Spindle taper: MT 4 - Spindle stroke: 225 mm - Spindle speed, infinitely variable: 35 – 950 rpm - Forward and reverse operation - 3 feed rates: 0.1; 0.16; 0.25 mm/rev - Throat depth: 360 mm - Max. distance spindle – table / base plate: 740 / 1220 mm - Table with 2 T-slots: 700 x 590 mm - Table height adjustable via rack and pinion with hand crank - Drive: 400 V / 2.2 / 4.0 kW - Space required (approx.): W 700 x H 2150 x D 1150 mm - Weight (approx.): 850 kg - Equipped with: Iajdpswdvwtofx Ab Sop - Emergency-stop button - Worklight - Coolant system

Būklė: paruoštas naudoti (naudotas), Sukimosi ilgis 500 mm Iaodpfxoxnda Ue Ab Ssp Sukimosi skersmuo virš lovos 297 mm Sukimosi skersmuo virš atramos 160 mm Veleno skylė 36,0 mm Tvirtinimas DIN 55022 Gr. 5 Grąžto įvorė: 3 MK Grąžto įvorės eiga 90,0 mm Sukimosi greitis 30 - 3550 aps./min Variklio apsukos: 1410 / 2830 aps./min Bendras energijos poreikis 3,3 kW Įtampa 380 V Staklių svoris apie 620 kg Matmenys I-P-A 1420 x 700 x 1200 mm Iš profesinės mokyklos – labai gera būklė (!!) Ypač tinkamas vidutinio tikslumo tekinimo detalėms Įranga: - tvirta sukamųjų ir sukanamųjų velenų tekinimo staklės - HEIDENHAIN 3 ašių skaitmeninė indikacija „VRZ 773“ - RÖHM trijų žiuvelių griebtuvas Ø 160 mm - Atverčiamas griebtuvo apsaugas - Griebtuvo raktas - MULTIFIX A tipo peilių laikiklis, su 3 naujomis įdėklomis - Perstumiama užtvara - Pasukama staklių lempa - Valdymo pultas kairėje priekyje - Automatinės išilginės ir skersinės atramos pastūmos - Staklių pagrindas su spintelės durelėmis (sandėliavimo vieta) - Skiedrų apsauginė galinė siena - 1 tuščia įrankių spintelė - Avarinio stabdymo mygtukas - Naudojimo instrukcija

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Max. carbide saw blade: 500 mm Saw motor drive power: 4 kW Saw motor speed: 2,800 rpm Saw blade cutting speed (500 mm): 4,400 m/min Saw height adjustment: infinitely variable, fully electronic Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 150 mm Feed length, pneumatic: 5–560, 10–1,120 mm Compressed air connection, on-site: 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2,900 mm x 1,400 mm x 1,500 mm Required installation space LxW: 2,900 mm x 1,400 mm Additional Description Elumatec SA/ SAS 142 4 kW Retrofit Elumatec SA 142 4 kW Retrofit Fully automatic saw for non-ferrous metals and plastics The machine is in like-new technical and optical condition after completion of the retrofit. The machine is fully refurbished at our facility according to customer requirements. The following points have been renewed, among others: - Conversion to Siemens S7 PLC control system - Conversion to Siemens HMI operator panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve manifolds - Maintenance of minimum quantity lubrication system - Replacement of common wear parts - Overhaul of the enclosure Warranty: Unless otherwise agreed, we offer a 6-month warranty on all parts overhauled or replaced by us. Labor and wear parts are excluded from the warranty. Options: Iajdpfeuiy Nysx Ab Sep - Extension of the sawing range for flat material, 90° max.: 300 x 120 mm - Chip breaker extension (for high-quality cut surfaces without drag marks) - Servo-controlled material feed - Servo-controlled saw blade feed - Heavy-duty clamping device for the gripper feed - Delivery and installation at your facility - Training of your personnel