Smulkinimo įrenginys

Metso M&J 4000S

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2006, galia: 320 kW (435,08 AG), Stationary shredding plant LINDNER Jupiter 3200. Electric drive: 2x 160 kW Including hydraulic unit, control cabinet. Drive belts new. Lodpjwg Ev Djfx Af Iehb

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tūrio srautas: 930 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Pre-Press Force: 28 t Press Chamber Volume: 2.7 m³ Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Condition of the Baler: The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced - New safety guards for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Lhjdpfx Aovwlqqef Ijb Scope of Delivery: Only the baler is being sold. Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.

Gamybos metai: 2022, veikimo valandos: 20 h, Sąlyga: beveik kaip naujas (parodų įrenginys),

Sąlyga: visiškai atnaujintas (naudotas), bendras svoris: 3 200 kg, Make: Kleemann, Model: SSTR 400 Jaw opening: 400 x 250 mm Capacity: 4 – 10 m³/h Gap width: 20 – 70 mm Lhedpfx Afeq Ttmfe Ieb Weight: approx. 3,200 kg Power requirement: 15 kW Workshop overhauled

Sąlyga: naudotas, Gamybos metai: 2021, veikimo valandos: 4 826 h, Equipment: Basic package Inventhor Type 9 MTU diesel engine 6R1300, 390 kW at 1,700 rpm, compliant with EUROMOT V emission standard Lhjdpfx Afevnmldj Ieb Auxiliary hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gearbox 380 kW – VARIO Load-sensing system Fuel tank 950 litres Longitudinal conveyor: belt length 4,450 mm, belt width 1,000 mm Centrally arranged wear strips 24 V electric control system Additional electric pump to operate the following functions when the engine is off: - Raise/lower/bend rear conveyor - Open/close comb flap - Open/close comb - Raise/lower optional overband magnet - Raise/lower optional folding hopper Complete radio remote control Large side GRP maintenance doors Service-friendly engine compartment with LED lighting Hydraulically reversible fan Bilateral loading protection Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt Telematic System Paintwork: RAL2011 deep orange Special equipment: 500 mm track chassis unit 500 mm flat track undercarriage Shredding system size “L” – VARIOMAT Size “L” – “Limiter” (20 pieces) Rear conveyor 7 m long, 1200 mm wide LED lighting package engine compartment and rear Water spraying system with hopper extension H=300 mm Frame for overband magnet Overband magnet 2 t permanent

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 21 676 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 750 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 25 000 kg, transporto aukštis: 3 000 mm, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tuščias svoris: 25 000 kg, tūrio srautas: 930 m³/val, darbinis slėgis: 250 juosta, Good day, We hereby offer you, subject to prior sale, a used baler from manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the operator’s manual and manufacturer brochures. We cannot accept any liability for the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours, as of November 2024 Main press force: 78 t Lodpfx Afevgrh Us Ishb Specific press force: 95 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume / press cycle: 2.7 m³ Throughput capacity under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions when assembled with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (press only): approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Sąlyga: geras (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, galia: 75 kW (101,97 AG),

Sąlyga: naudotas, Gamybos metai: 1991, VECOPLAN VAZ 120/105-U Waste Crusher For shredding particleboard and solid wood waste, drive power 18.5 kW, throughput 1000 kg / h for chipboard waste, 350 kg / h for solid wood waste, screen diameter 25 mm, rotor diameter 235 mm (circle), width 1070 mm, 120 rpm, feed unit : Sectional steel construction , driven by hydraulic cylinders, in plastic guide rails, laterally with rollers, main drive E-motor with turbo coupling, V-belt drive, 2-stage helical gearbox, motor rated power 18.5 kW, rated current 36.5 A, 1455 rpm, 400 V, 50 Hz, Degree of protection IP 54, Type B 3, Lhjdpfot Dh T Dex Af Ijb V-belt pulley Turbo clutch D 1 = 200 mm, V-belt pulley Drive D 2 = 200 mm, Number of V-belts Z = 3 pieces, V-belt Effective length LW = 1900 mm, center distance ENOM = 635.84 mm, Door length L = 635.84 mm, impression depth EA = 23.35 mm, test force per V-belt F = 75?, Turbo coupling: hydrodynamic coupling, load-free starting of the electric motor, overload protection, hydraulic ic unit: Compact unit with 2 operating speeds, drive power 1.0 / 1.4 kW, drive pressure max. up to 180 bar, extraction nozzle: minimum air velocity V = 28 m / s, inlet length 1200 mm, inlet width 1050 mm, waste shredder with universal rotor- dimensions in mm: approx. 6500 x 2700 x 3600, weight in kg: approx. 2300, Machine quality: fully operational after maintenance. year of construction: 1991

Gamybos metai: 2024, Sąlyga: naujas, We also offer leasing and financing options. Feel free to contact us! For all types of recycling, we keep shredders and various recycling machines in stock at our Heilbronn location! From copper recycling to plastic recycling, you can purchase all the necessary machines from us. Just ask us for details. With Josan & Söhne Maschinenbau — maximize your copper recovery! ‼️We are happy to demonstrate the machines to you in person in Heilbronn! By appointment only‼️ We are a German company based in Heilbronn: German regulations, warranty, and service! We also speak English! We are happy to advise you on any recycling-related questions! Material separation within the recycling sector — just ask. Electrostatic separator for separating plastics, synthetics from copper, iron, or other materials. It can also separate plastics from metals in plastic window profiles. Efficient separation of plastics from sand or different types of plastics. ➡️Motor: 6.59 kW ➡️Dimensions (L x W x H): 4000 x 1400 x 3000 mm ➡️Weight: approx. 1000 kg ➡️Capacity: 150–300 kg per hour Price on request! Ledpfeqvmpfex Af Ishb Errors excepted. Images/price/specifications may vary.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, veikimo valandos: 500 h, mašinos/transporto priemonės numeris: 22-014, Very good metal separator for separating all metals (including stainless steel, V2A) from a material stream. Can be used before or after a non-ferrous separator (eddy current separator) or as a stand-alone machine. Separation of all metals from approximately 1 mm particle size. Suitable for metal content up to 60%. Unique flap technology (flipper), no compressed air required. The machine is immediately operational, can be inspected and tested. Camera option available upon request! If the machine is too small, we can also manufacture larger models. This is our demonstration machine. Maximum throughput depends on material and application. Lhedpfsqabm Eox Af Ieb Price negotiable!