Mikroautobusas

Mercedes-Benz V-Klasse V 300 d 4MATIC EXCLUSIVE Lang EXCLUSIVE

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 27,95 kW (38,00 AG), Gamybos metai: 2017, veikimo valandos: 1 751 h, IRUS Deltrak 2.5 - 38 HP Bljdpfx Agjrr Tm Dj Iol Radio-Controlled Slope Mower / Large Area Mower / Bank Mower Attachment: - SM-125 Flail Mower This IRUS Deltrak 2.5 was built in 2017, has 1,751 operating hours according to the meter, and is in well-maintained overall condition with the typical signs of use and wear for this equipment class. Major service including visual refurbishment has been performed, immediately ready for use, current new price is €60,000! Sale is as a used machine with exclusion of return, warranty, and guarantee. Net price: €31,900 // Gross price: €37,961 - Inspection / test drive welcome - Nationwide shipping can be organized; costs depend on distance - Financing / leasing can be arranged individually for you

Būklė: naudotas, Gamybos metai: 2024,

Gamybos metai: 1975, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, pavaros tipas: Diesel 130 Kw, Patrol boat of the former East Germany (GDR), later used by the Berlin Water Police (WSP 1), equipped with an IFA 6-cylinder diesel engine. Winterized and capable of breaking ice up to 3 cm thick. Approved for operation on all bodies of water, including open sea. Dimensions: 11.90 m length, 2.90 m beam, 0.90 m draft Speed: Over 30 km/h Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from a 10-liter displacement. These engines are highly fuel-efficient, consuming only 6–8 liters per hour at canal speeds of 8–12 km/h. Features: - Signal mast, mast headlight, full navigation and deck lighting - Dual helm positions: inside cabin and on flybridge - AGM starter batteries, 24V onboard power supply, 12V system - Brand new marine toilet - Electric and manual bilge pump system - Full overhaul from 2021–2023: 5-layer primer and 3-layer antifouling Blodpfx Agsy D Rk Ij Iel - Hull: steel; superstructure: aluminum - All-new electrical wiring, exhaust system, clutch, overhauled engine, refurbished fuel tank with new lines and air filter The engine starts and runs perfectly; forward and reverse gear engagement is smooth. Some additional work required to enhance comfort. The vessel is suitable for use as a small tug, workboat, or fishing boat. Note: Gauges and switches for the lower helm are available, but the instrumentation still needs installation.

Būklė: naudotas, Gamybos metai: 2023, veikimo valandos: 950 h, galia: 224 kW (304,55 AG), maksimalus greitis: 50 km/h, priekinės padangos dydis: 600/70 R30 | 0%, galinės padangos dydis: 710/70 R42 | 0%, padangos dydis: 710/70 R42, lovų skaičius: 43,

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, pirmoji registracija: 06/2021, kuro tipas: benzinas, spalva: geltonas, Gamybos metai: 2021, veikimo valandos: 150 h, Įranga: kabelinė gervė, visų varančiųjų ratų pavara, Spider 2SGS large-area mower and slope mower with radio remote control, including winch. Purchased mid-2021, first owner, recent 150 operating hours service completed. Comes with operator's manual and all documentation, remote control with 2 batteries. I have only used the mower in a solar park, nothing else. The mower runs perfectly, no issues. For any questions, just call. Bedstv Rmfjpfx Ag Ijll

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2201925, bendras svoris: 2 263 kg, kuro tipas: dyzelinas, bakelio talpa: 600 l, spalva: raudona, galia: 112 kW (152,28 AG), išėjimo įtampa: 400 V, išėjimo dažnis: 50 Hz, išėjimo srovės tipas: trifazis, nominali galia: 112 kW (152,28 AG), nominali (akivaizdi) galia: 150 kVA, nuolatinė galia: 112 kW (152,28 AG), nepertraukiama (akivaizdi) galia: 150 kVA, bendras ilgis: 3 300 mm, bendras plotis: 1 200 mm, bendras aukštis: 1 970 mm, sukimosi greitis (maks.): 1 500 aps./min, variklių gamintojas: FPT/Iveco, aušinimo tipas: vanduo, kombinuota degalų sąnauda: 32,5 l/100 km, kuro sąnaudos (mieste): 16,17 l/100 km, kuro sąnaudos (užmiestyje): 22,77 l/100 km, kuras: dyzelinas, kuro bako talpa: 600 l, baterijos talpa: 100 Ah, akumuliatoriaus įtampa: 12 V, įėjimo įtampa: 12 V, įėjimo dažnis: 50 Hz, įėjimo srovė: 32 A, darbinė temperatūra: 25 °C, aplinkos temperatūra (min.): −25 °C, aplinkos temperatūra (maks.): 45 °C, valdymo spintos aukštis: 1 970 mm, valdymo spintos ilgis: 3 330 mm, valdymo spintos plotis: 1 200 mm, apsaugos tipas (IP kodas): IP65, sukimosi greitis (min.): 1 500 aps./min, temperatūra: 25 °C, įvesties srovės tipas: trifazis, garantijos trukmė: 12 mėnesiai, Įranga: dokumentacija / vadovas, mobilioji dyzelino kuro talpa, The Bredenoord 140 KVA generator is a reliable and versatile solution for both temporary and long-term power requirements across various environments. This genset is ideal for mobile use and meets Stage V emission standards. The efficient FPT/Iveco engine, in combination with a Stamford alternator, delivers outstanding performance and low operating costs. The generator is housed in a soundproof enclosure that ensures minimal noise emissions—making it suitable for use in noise-sensitive environments (super silent). The enclosure features thick, oil-resistant sound insulation and external socket outlets with circuit breakers for enhanced safety. With a 600-litre fuel tank, the generator provides up to 18 hours of autonomy under continuous operation. The system operates on diesel, HVO, or GTL fuels, offering flexible fuel options. Technical Specifications: - Model: Bredenoord 140 KVA - Rated power: 150 KVA - Max. power: 150 KVA - Engine: FPT/Iveco NEF67TM3A - Alternator: Stamford brushless alternator (AVR) - Output: 150 KVA - Voltage: 230/400 V, 50 Hz - Speed: 1500 rpm - Noise level: 68 dB(A) at 7 meters - Fuel tank: 600 litres - Autonomy: - 100% PRP: 18 hours - 70% PRP: 26 hours - Engine power: 112 kW - Battery charger and engine pre-heater: Standard - Control panel: Comap MRS16 (auto start/stop) - Dimensions (L x W x H): 3.30 m x 1.20 m x 1.97 m - Weight: 2263 kg - Emission class: Stage V Fuel consumption: - 100% PRP: 32.5 L/h - 70% PRP: 22.77 L/h - 50% PRP: 16.17 L/h Options: - Engine pre-heater - Battery charger - 3-way fuel tap - XXL fuel tank Sound Attenuation: The generator is engineered with optimized air inlets and special insulation materials to minimize noise. The sound insulation is reinforced with wool of varying thicknesses to reduce noise over a wide frequency range, making it ideal for use in noise-sensitive areas. Durability: The canopy is corrosion-resistant thanks to a coating tested for over 2,000 hours (C5I-H), ensuring long service life even in the most challenging conditions. Safety: The generator is equipped with reinforced locks and stainless steel hinges. The doors are designed with a 20-degree chamfer to prevent water accumulation and minimize oxidation. Bjdpfewfgd Hjx Ag Ioll Transport and Mobility: The generator is easily movable due to reinforced lifting eyes and steel beams, making transport on construction sites straightforward. The design ensures stable and secure movement of the generator without risk of damage. Customer-Specific Customization: The Bredenoord 140 KVA generator is available in various versions, from 20 KVA up to 600 KVA. Customer-specific modifications are possible, allowing the generator to be tailored to particular requirements and applications. Certifications: - CE-certified - European manufacturing Applications: This generator is suitable for multiple sectors, including construction, industry, and any other application that requires reliable and efficient power supply.

Būklė: naujas, Gamybos metai: 2026, CORMAK ZX 40BPC is a robust metal drilling and milling machine. It features a spindle head that can rotate +/- 90 degrees, automatic spindle feed, right and left rotation, a large table, coolant system, optional automatic X-axis table feed, a powerful 2-speed 1.5 kW motor, and a drilling capacity up to 40 mm. Spindle speed up to 3200 rpm. CORMAK Product Features: - Durability – All machines and tools are made from top-quality materials, ensuring longevity and reliable operation. - Precision – Advanced manufacturing technologies provide exceptional accuracy, essential for precision machining tasks. - Innovation – Technical solutions applied in CORMAK products enhance work efficiency and ease of operation. CORMAK is a dynamic brand earning satisfied customers worldwide in both woodworking and metalworking industries. - Adjustable working flexibility – thanks to a rotatable head and adjustable height. - Threading function and reversible spindle direction (right and left), increasing versatility. - Precise depth setting – with a three-arm lever and calibrated hand wheel for accurate depth control. - Automatic spindle feed for greater precision and convenience during drilling. - Advanced oil-lubricated gearbox – equipped with ground and hardened gears, ensuring smooth and durable operation. - Stable construction – solid base ensures secure setup and vibration-free operation. - High performance – thanks to a powerful motor, effective even for tough materials. - Durable column – with ground finish, ensuring rigidity and precise operation. - Safety guard – swing-away plexiglass chuck guard for extra operator protection. - Heavy-duty cast column – provides high machining accuracy and long service life. - Worktable with T-slots (14 mm) – facilitates quick and easy vise and accessory mounting. - Coolant system – standard equipment for safe and efficient extended operation. Technical Data Max. drilling capacity (steel/cast iron): 32/40 mm Face milling width: 80 mm Bjdevxhfmopfx Ag Isll End milling width: 22 mm Spindle travel: 125 mm Spindle taper: MT4 Number of speeds: 12 Spindle speed (rpm): 95-3200 (95, 170, 190, 280, 340, 540, 570, 960, 1100, 1600, 1950, 3200) Max. distance from spindle end to table: 735 mm Max. distance from spindle end to base: 1245 mm Distance from spindle to column surface: 272 mm Table dimensions: 730x210 mm Base dimensions: 690x520 mm Motor power S1/S6: 1.1/1.5 kW (1.5/2.0 HP S1), 1.7/2.2 kW (2.25/3.0 HP S6) Coolant pump motor: 40 W Machine dimensions (height with base): 1200x1000x910 mm Weight: 380 kg

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, rida: 20 km, galia: 140 kW (190,35 AG), kuro tipas: dyzelinas, tuščias svoris: 5 500 kg, bendras svoris: 5 700 kg, ratų bazė: 4 325 mm, kuro bako talpa: 93 l, spalva: juodas, pavaros tipas: automatinis, emisijos klasė: Euro 6, sėdimų vietų skaičius: 13, Gamybos metai: 2026, Įranga: ABS, automobilio registracija, autonominis šildytuvas, borto kompiuteris, centrinis užraktas, elektroninė stabilumo programa (ESP), imobilaizerio sistema, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, oro pagalvė, papildomi žibintai, priekabos jungtis, priešrūkiniai žibintai, spoileris, statymo jutikliai, stumdomos durys, suodžių filtras, trauki kontrolė, vairo stiprintuvas, vasarinės padangos, žemas triukšmo lygis,

Būklė: naudotas, rida: 4 861 km, galia: 44 kW (59,82 AG), pirmoji registracija: 07/2010, kuro tipas: dyzelinas, spalva: žalia, pavaros tipas: mechaninis, pakaba: kitas, sėdimų vietų skaičius: 1, veikimo valandos: 4 861 h, Įranga: visų varančiųjų ratų pavara,

Būklė: naujas, Gamybos metai: 2024, Working width: 520 mm Cutterhead: Tersa Number of knives: 4 Jointer table length: 2300 mm Jointer fence angle adjustable: yes Jointer tables lift: pneumatic Maximum thicknessing height: 250 mm Thickness table height adjustment: electric with position control Planing thickness display: digital Feed speed: 5/8/12/18 m/min Infeed roller: steel Outfeed roller: rubber Pressure beam: segmented Table rollers: no Motor power: 7.5 kW Blsdpfx Aovadxleg Iel Motor brake: yes, automatic Extraction connection: 160 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 980 kg