Automobilių gabenimo furgonas

MERCEDES-BENZ 814 L 4x2 Auffahrrampen Seilwinde

Būklė: naujas, rida: 500 km, galia: 189 kW (256,97 AG), kuro tipas: dyzelinas, pavaros tipas: automatinis, bendras svoris: 11 990 kg, krovimo vietos ilgis: 6 400 mm, krovinių skyriaus plotis: 2 450 mm, emisijos klasė: Euro 6, spalva: geltonas, Įranga: ABS, elektroninė stabilumo programa (ESP), oro kondicionavimas,

Būklė: naujas, Gamybos metai: 2026, The Cormak PT265 Planer-Thicknesser is a robust and well-engineered machine, offering extensive adjustment capabilities and mechanical processing of both hardwood and softwood. The adjustment itself is simple, and converting the planer to thicknessing operation takes just a few seconds. Latest machine version with an innovative table opening system: Duedjvxhznspfx Affep ❌ Competing machines of the old type are fitted with “butterfly” tables. Before each job, the infeed and outfeed tables need to be recalibrated. Even small discrepancies between them lead to material damage and undesirable effects. ✔️ The new integrated table solution allows precise adjustment of both tables simultaneously! Once set, the tables remain permanently calibrated. When adjusting the planing height, both tables move in unison. ✔️ This innovation not only saves time and makes the machine more convenient to use, but also increases planing precision by 30% compared to previous systems. This is particularly important for working with thinner materials. Stable, vibration-resistant construction The machine’s weight of up to 170 kg, combined with wide, 265 mm precision-ground cast iron tables, ensures high stability and safe operation. Additional rubber feet ensure operation is virtually vibration-free. VERSION with the most powerful motor: S6 2.6 kW total output The PT265 Planer-Thicknesser stands out with its exceptionally powerful S6-rated 2.6 kW motor (2.2 kW S1). This is significantly more than most competitor machines, resulting in higher performance and stable operation. A more powerful motor means smooth operation and effortless processing of hard materials: Hardwoods require greater force to machine. The powerful motor handles this with ease. Effortless changeover from jointer to thicknesser. Switching from jointer to thicknesser mode is quick and straightforward—simply release the eccentrics, raise the tables, and reposition the chip extraction cover. Precision working. - Smooth height adjustment of tables with a scale. - Thicknesser table is centrally mounted on a column and features an adjustment handwheel. - Aluminum tilting fence (700x150 mm) with scale strip for precise adjustment between 90-45 degrees. Technical data: Cutterhead diameter [mm]: 75 Cutterhead speed [rpm]: 4000 Extraction port diameter [mm]: 100 Tilting fence angle [°]: 0 - 45 Number of knives: 3 Cutterhead length [mm]: 262 Knife dimensions [mm]: 2500x300x30 Maximum planing width [mm]: 265 Maximum thicknessing width [mm]: 265 Maximum planing height [mm]: 180 Maximum thicknessing depth of cut [mm]: 3 Maximum planing depth of cut [mm]: 2.5 Thicknesser feed speed [m/min]: 6 Fence dimension [mm]: 700 x 150 Machine dimensions (L x W) [mm]: 1080 x 269 Weight [kg]: 170 Total motor power S6: 2.6 kW Power supply: 400V

Būklė: naujas, Gamybos metai: 2026, The Cormak PT265 jointer-planer is a robust and well-engineered machine, offering extensive adjustment possibilities and the capability to process both hard and soft wood mechanically. Adjusting the planer is straightforward and switching between jointer and thicknesser modes takes just a few seconds. Latest machine version with an innovative table opening system: ❌ Competing machines of the older design use 'butterfly' tables. Before each operation, the infeed and outfeed tables must be recalibrated relative to each other. Even slight misalignments can cause material damage and undesired results. ✔️ The new interconnected table system allows for precise, simultaneous adjustment of both tables. Once set, the tables remain permanently calibrated. When changing the planing height, both tables move in sync. ✔️ This solution not only saves time and increases working comfort but also improves planing accuracy by up to 30% compared to older systems. This enhancement is particularly crucial when working with thinner materials. Stable, vibration-resistant construction The machine’s substantial weight of 170 kg, combined with wide, ground cast iron tables (265 mm), ensures a high level of stability and safe operation. Additional rubber feet enable operation without any noticeable vibration. VERSION with the most powerful S6: 2.6 kW motor The PT265 jointer-planer features an exceptionally powerful S6 2.6 kW (S1 2.2 kW) motor—significantly exceeding what competitive models offer, resulting in enhanced performance and stable operation. A more powerful motor ensures stable operation and makes processing hardwoods effortless: Hard timber requires greater force for machining, which this robust motor handles with ease. Effortless mode change from jointer to thicknesser Switching from jointer to thicknesser mode is very quick and easy. It only requires unlocking the eccentrics, lifting the tables, and repositioning the chip extraction hood. High working precision - Smooth height adjustment of the tables with scale. - The thicknessing table is centrally column-supported and equipped with a handwheel for up and down adjustments. - Aluminum tilting fence (700x150 mm) with scale allows for precise angle setting from 90 to 45 degrees. Technical specifications: Knife shaft diameter [mm]: 75 Duedpfxjwu T S Aj Affjp Knife shaft speed [rpm]: 4000 Suction port diameter [mm]: 100 Tilting fence angle [°]: 90 - 45 Number of knives: 3 Shaft length [mm]: 262 Knife dimensions [mm]: 250x30x3 Max. planing width (jointer) [mm]: 265 Max. planing width (thicknesser) [mm]: 265 Max. planing height [mm]: 180 Max. planing depth (thicknesser) [mm]: 3 Max. planing depth (jointer) [mm]: 2.5 Thicknesser feed speed [m/min]: 6 Fence dimensions [mm]: 700 x 150 Machine dimensions (L x W) [mm]: 1080 x 269 Weight [kg]: 170 Total motor power: S6: 2.6 kW Power supply: 230V

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, mašinos/transporto priemonės numeris: AB00033534, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, obliavimo plotis: 520 mm, sukimosi greitis (maks.): 5 000 aps./min, obtotalinė obliavimo stalų ilgis: 2 310 mm, obliavimo peilių skaičius: 4, obliaus veleno skersmuo: 120 mm, išlyginimo tvoros aukštis: 1 200 mm, Įranga: variklio stabdis, Main Features: - Quick-change system for opening the tables - Speed, ergonomics, and safety - Worktable adjustment via parallelogram system - Long-lasting precision Technical Data: - Usable working width: 520 mm - Total table length: 2310 mm - Cutter block diameter: 120 mm - Planer shaft speed: 5000 rpm - 4 knives, 35 mm x 3 mm x 520 mm - Aluminium fence: 1200 mm x 190 mm - Fence tilting range: 90° to -45° - Min./max. planing height: 3 / 250 mm - Thicknessing feed speed: 5–8–12–18 m/min - Extraction hood diameter, surfacing: 120 mm - Extraction hood diameter, thicknessing: 120 mm Standard Equipment and Accessories - Infeed table adjustment via parallelogram system for chip removal setting by degree scale - Simultaneous height adjustment and locking of the worktables, complete with anti-tilt device Dedpfxowwv Ufj Affeup – Quick-change system for switching from surface to thickness planing (CE version) via a special support for opening the surfacing tables and an automatic pneumatic positioning system for the extraction hood, with a hydraulic system – "READY" electronic control unit including: * Thickness table adjustment * Manual, semi-automatic, and automatic modes with 99 storable work programs * Additional functions: calculator and operating hours counter – Machine table height adjustment via 4 steel lead screws – Feed with independent drive for thicknessing – Outfeed roller coated with rubber – Sectional pressure pads at the infeed – Planer shaft and knife holder with markings as positioning aids, with setting gauge for planer knives – Automatic star-delta start for the main motor – Motor output: 9 kW 50 Hz (11 kW 60 Hz) (S6 -40%) [S1] 7.5 kW 10 HP 50 Hz (9 kW 12 HP 60 Hz) [S6 -40%] 9 kW 12 HP 50 Hz (11 kW 15 HP 60 Hz) – Operating tools Safety/Protection – Micro safety switches for correct positioning of surfacing tables and extraction hoods – Surfacing guard (CE version) – Automatic motor brake on main motor – Thermal protection switch – 110V auxiliary circuit – Emergency stop switch – Lockable main switch – CE declaration of conformity (CE version) Consisting of: R0.20.20 Linvincibile FS 7 CE version 93.07.31 Voltage: 400V EU 93.12.01 Frequency: 50 Hz 34.02.15 “TERSA” cutter block with disposable reversible knives Complete with one set of knives 24.06.15 Tiltable auxiliary fence for thin workpieces 08.32.28 Base

Būklė: naujas, Gamybos metai: 2026, Planer-thicknessers, jointers in the Cormak range Our shop offers a wide selection of professional, versatile planers that combine stable operation with high surface accuracy at competitive prices. Acquire a tool that will accelerate your production and improve the quality of your wooden products, even for hobby use in home workshops. Cormak stands for satisfaction guaranteed. Duodpovxh Nrefx Affjp Construction and Operation of the Planer Table: The thicknessing table is made from high-quality cast iron, ground and polished to a Ra 1.6 surface finish. Height adjustment is done via a large and ergonomic handwheel, which can be locked in place using an additional eccentric lever once the desired height is set. Knives: The key element of the planer, installed above or below the table, are responsible for removing excess material from the wood surface. These knives are mounted on a rotating cutterblock or head. Motor: The planer is powered by an electric motor that supplies the energy necessary to drive the cutterblock or planing head. Cutterblock Guard: The guard can be freely adjusted for height, angle, and reach, allowing practical and user-friendly operation. Feed Mechanism: The woodworking machine features drive and return rollers positioned very close to the cutterblock, enabling you to process even relatively short pieces. Feed roller drive is chain-based, ensuring slip-free operation and eliminating marking or gouging on the workpiece surface. Guides: Guides ensure smooth and even movement of the workpiece. The angle guide can be smoothly set from 90° to 45°. Stability: The heavy weight of the machine ensures high stability, providing safe, vibration-free operation, supported by anti-vibration feet. Ease of Use: Adjustments are user-friendly, and switching from planing to thicknessing mode takes only a few seconds. Technical Specifications for the Wood Thickness Planer: Cutterblock diameter [mm]: 75 Cutterblock speed [rpm]: 4,000 Extraction port diameter [mm]: 100 Tilting fence angle [°]: 0 – 45 Number of knives: 3 Knife dimensions [mm]: 250 x 30 x 3 Maximum surfacing width [mm]: 254 Maximum thicknessing width [mm]: 254 Maximum planing height [mm]: 180 Maximum depth of cut (thicknesser) [mm]: 3 Maximum depth of cut (jointer) [mm]: 2.5 Thicknesser feed speed [m/min]: 6 Dimensions (L x W) [mm]: 1080 x 260 Gross weight [kg]: 152 Motor power: 2.6 kW Power supply: 400V

Būklė: naudotas, rida: 163 548 km, galia: 103 kW (140,04 AG), pirmoji registracija: 09/2022, kuro tipas: dyzelinas, tuščias svoris: 2 205 kg, didžiausias leistinas svoris: 1 220 kg, bendras svoris: 3 500 kg, ašių konfigūracija: 2 ašys, ratų bazė: 4 035 mm, vairuotojo kabina: dieninė kabina, pavaros tipas: mechaninis, sėdimų vietų skaičius: 3, Įranga: ABS, oro kondicionavimas,

Būklė: naudotas, rida: 520 000 km, galia: 114 kW (155,00 AG), pirmoji registracija: 09/1995, kuro tipas: dyzelinas, bendras svoris: 7 490 kg, kita apžiūra (TÜV): 03/2027, spalva: oranžinė, pavaros tipas: mechaninis, sėdimų vietų skaičius: 3, krovimo vietos ilgis: 3 800 mm, krovinių skyriaus plotis: 2 200 mm, krovos erdvės aukštis: 400 mm, Įranga: ABS,

Būklė: naudotas, rida: 24 665 km, galia: 103 kW (140,04 AG), pirmoji registracija: 04/1992, kuro tipas: dyzelinas, ašių konfigūracija: 4x2, kuras: dyzelinas, spalva: raudona, pavaros tipas: mechaninis, pavarų skaičius: 5, sėdimų vietų skaičius: 7, Gamybos metai: 1992,

Būklė: naudotas, rida: 945 734 km, galia: 162 kW (220,26 AG), pirmoji registracija: 08/2003, kuro tipas: dyzelinas, tuščias svoris: 6 530 kg, didžiausias leistinas svoris: 5 385 kg, bendras svoris: 11 990 kg, ašių konfigūracija: 2 ašys, ratų bazė: 5 075 mm, stabdžiai: variklio stabdymas, vairuotojo kabina: dieninė kabina, pavaros tipas: mechaninis, emisijos klasė: Euro 3, pakaba: plienas-oras, sėdimų vietų skaičius: 2, Įranga: ABS, diferencialo užraktas, sunkvežimio registracija, suspausto oro stabdys,

Būklė: naudotas, rida: 30 824 km, galia: 124 kW (168,59 AG), pirmoji registracija: 10/1978, kuro tipas: benzinas, tuščias svoris: 6 320 kg, didžiausias leistinas svoris: 1 170 kg, bendras svoris: 7 490 kg, ašių konfigūracija: 4x4, spalva: raudona, vairuotojo kabina: kitas, pavaros tipas: mechaninis, emisijos klasė: nėra, pakaba: kitas, bendras ilgis: 7 100 mm, Gamybos metai: 1978, statybinis aukštis: 3 100 mm, Įranga: diferencialo užraktas, priekabos jungtis, visų varančiųjų ratų pavara,