Vadovas ir pašarų verpstės tekinimo Stepless.

MCM Italy TC 300 x 1500

Sąlyga: labai geros būklės (naudotas), Swing diameter over bed: 1000 mm Distance between centers: 2000 mm Center height: 500 mm Swing diameter over cross slide: 700 mm Spindle bore: 128 mm Duodpfx Abowhkdcj Sol Spindle speeds: 6.4–1,600 rpm SIEMENS 810 D control system Various accessories MARCELS MASCHINEN CH

Sąlyga: naudotas, Gamybos metai: 1976, Sukimo diametras virš staklių lovos: 0560 mm Sukimo diametras virš atramos: 350 mm Sukimo ilgis: 1500 mm Veleno skylė: 65 mm Djdpfxst Tqgxe Ab Ssul Veleno apsukos: 16-1250 aps./min. Išilginiai padavimai: 0,050–24,0 mm/aps. Skersiniai padavimai: 0,039–18,86 mm/aps. Bendras galios poreikis: 9 kW Staklių svoris apie 4,5 t

Sąlyga: naujas, Gamybos metai: 2025, Quick miter adjustment from 30° to 150°, stepless, with 0.5° accuracy according to the scale. The miter pivot point is at the intersection of the saw band and the material stop, so there is no change in length measurement. End stops at 30° & 45° left and 30° & 45° right. Manual material clamping. In every angle position of the saw frame, the material is clamped parallel at 90°. Cutting pressure reduction by the own weight of the heavy, torsion-resistant saw frame and fine adjustment according to material cross-section via hydraulic damping cylinder. Standard equipment with coolant unit, which can optionally be supplemented with a micro-dosing system. Machine base with chip tray. Saw band drive with end-of-stroke switch. Precision saw band carbide-roller guides. Painted silver-grey / blue-grey (RAL 7001 / RAL 7031). 1 saw band mounted on the machine, 4/6 TPI. Operating manual and spare parts list on CD-ROM. Dsdpfxjbi S Dio Ab Seul Special equipment: Hydraulic lifting of the saw frame. Execution: Manual Miter capacity: 30° left: Ø 130mm; square 120x120mm 45° left: Ø 200mm; square 180x180mm 90°: Ø 260mm; square 300x260mm 45° right: Ø 200mm; square 180x180mm 30° right: Ø 130mm; square 120x120mm Motor: [kW] 1.8 Saw band: [mm] 3350x27x0.9 Saw band speed: 35/75 m/min Working height: [mm] 900

Sąlyga: naudotas, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture: approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feeds: longitudinal and facing Chuck flange: Short taper DIN 55022 size 4 Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox ranges - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change toolholder with 1 changeable cassette - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm Djdsrtd Uwepfx Ab Soul - 1 centre point for collet chuck - Emergency stop - Hinged chuck guard - Splash guard panel - Machine lamp - Electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H: 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 242350148, -WT 106- Offered here is a bench drill press from Flott, model TB23L. The drill press is mounted on a special lift table (not the original lift table). Technical data: Dsdpfx Abelf Evce Sjul - 6-step speed adjustment (manual via belt pulley) - MK2 taper

Sąlyga: naujas, Swing diameter: 420 mm Turning length: 1,500 mm Swing diameter over cross slide: 250 mm Swing diameter in bed gap: 590 mm Center height: 210 mm Turning length in bed gap: 260 mm Spindle speeds: 16 (45-1,800) rpm Tailstock taper: MT 4 Quill stroke: 120 mm Quill diameter: 50 mm Spindle nose: DIN ISO 702-2 No. 6 Spindle bore: 52 mm Spindle taper: MT 6 Longitudinal feed: 17 / 0.05 - 1.7 m/min Cross feed: 17 / 0.025 - 0.85 m/min Total power requirement: 4.6 kW Machine weight approx. 1,340 kg Space requirement approx. 2,440 x 915 x 1,375 mm Fully equipped lead- and feed-screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mounting Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduations 0.04 / 0.02 mm - Four-way tool post - All guides adjustable via gib strips - Compound slide travel range ±90° - Guaranteed spindle nose runout accuracy better than 0.015 mm - Main spindle runs in oil bath - Gearwheels smoothly running, hardened and ground, supported by two adjustable precision tapered roller bearings - Handwheels decoupled and tested in accordance with EN 23125 - Two-channel forward/reverse switch tested according to EN 23125 - Switches with lifecycle calculation, tested according to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI selectable via control levers without changing gears - Forward/reverse switchable on bed slide via leadscrew - Central lubrication on bed slide - Base and machine bed cast in one piece from Meehanite casting - Leadscrew cover - Emergency stop device with foot pedal - Safety handwheels with disengagement function on X and Z axes - Tailstock adjustable by ±10 mm for taper turning - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment via clamping lever - Deep-ribbed prism bed, induction hardened and precision ground from grey cast iron - Coolant system with separate coolant tank, level indicator and oil separator; easy and complete draining and cleaning according to DIN - LED machine lamp in chip guard Models TH 4210D and TH 4215D with digital position indicator DPA21: - User-friendly membrane keypad, splash proof, sealed and anti-glare - Glass scales Scope of delivery: - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MT 6 / MT 4 - Fixed center MT 4 - Change gear set - Position stop with fine adjustment Dusdpfx Abjk Egrpe Sel - Initial fill with quality oil - Operating tools Including special accessories: OPTIMUM 3-jaw chuck, centrically clamping, Ø 250 mm Quick-change tool post SWH5-B set

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, For sale: Weiler lathe, model Primus LZ-GS. The machine is in very good condition. Technical specifications: Year of manufacture: 1989 Machine No.: 4443 Operating voltage: 380 V Centre height: 120 mm Dedpfsihig Ijx Ab Sjul Centre distance: 430 mm Spindle speed: 60 – 3,000 rpm in 18 gear steps Spindle bore: 23 mm Short taper spindle nose DIN 55027 Tailstock: Morse taper 2 Feed range: 0.03 to 0.15 mm/rev Thread cutting capability: metric, inch, module, and diametral pitch threads Metric thread pitches: 0.25 to 2.5 mm Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Prices are subject to VAT. Viewing by appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase and sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Sąlyga: geras (naudotas), Gamybos metai: 1992, Fully automatic bandsaw, manufacturer: JAESPA, type: W400 AZ Control: Minipos 807, year of manufacture: 1992 Maximum cutting diameter (round material): 400 mm Saw band dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Chip conveyor Total power requirement: 4 kW Weight: approx. 2500 kg Accessories: 2x saw blades, 6 m roller conveyor with motorized drive, machine documentation available. Djdpfx Asgf H Sajb Ssul Required space: 2.8 x 2.8 x 2 m

Sąlyga: naudotas, Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, Tool grinding machine Jungner Sweden Duedpswdihrjfx Ab Sol Year of manufacture: 1995 Accessories

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Stock No. 2553 Djdpfx Aoiyyndsb Ssul 1 used, partially overhauled and function-tested extruder, consisting of: Material hopper Single-screw extruder BATTENFELD type UNI-EX 1-75-25 B Screw diameter 75 mm – 25 L/D, cylinder with blower cooling Screw speed up to 130 rpm Drive: 120 kW – DC (overhauled), belt-driven Heating zones – control sections for downstream equipment Control cabinet, melt pressure sensor Inspection / test run possible at short notice by appointment at our Wuppertal facility. Matching accessories available: > Screen changer > Granulation (strand, hot-cut, or water ring) > Miscellaneous Additional extruders and complete lines are available for demonstration ex works Wuppertal. We look forward to your inquiry or visit.