Stulpinis gręžtuvas

MAXION UNIMAX 4 Basic Plus

Sąlyga: naujas, Gamybos metai: 2024, 10-ton container rotator Dual synchronized drive Continuously adjustable axle spacing via threaded spindle Continuously variable speed control Crjdpfxeifk Rbj Admsk With foot remote control Suitable for diameters from 300 mm to 3,500 mm Roller width and diameter: 120 x 270 mm Speed range: 200 - 1,200 mm/min.

Gamybos metai: 2022, Sąlyga: naujas, Technical data: - Load capacity: 10,000 kg - Dead weight: 850 kg - Workpiece diameter (insertable): 50 - 3,500 mm Csdpfsfxw H Ajx Admork - Roller diameter: 250 mm - Roller width: 160 mm - Rotational speed: approx. 100–2,000 mm/min - Two-pedal foot switch - Potentiometer for stepless speed control

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1989, Dear Sir or Madam, We are offering for sale a partially overhauled Deckel FP1 with a 3-axis TNC113 active control, which stands out for its particularly user-friendly operation. This newer version from the year 1989 features, among other things, central lubrication, an electric coolant pump, and a machine lamp. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition, which you are welcome to inspect on-site. As part of the partial overhaul, the following work, among others, was carried out: - Spindle bearings of the milling head replaced - Repainting - Various standard parts such as handles, oil sight glasses, buttons, etc. replaced - Wear parts such as drive belts, etc. replaced - Some bellows replaced - Gib strips adjusted - and much more… Delivery time: immediately Codpfx Adjpy Eldjmsrk Year of manufacture: 1989 Machine no.: 2102-xxxx Table: fixed angle table Travel paths: X300mm / Y160mm / Z340mm Quill stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: stepless 5-500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: coolant system, central lubrication, manual, machine mounts Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can overhaul your chosen machine either completely or partially - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety devices - We are happy to take care of shipping and/or installation

Sąlyga: naujas, Swing diameter: 420 mm Turning length: 1,500 mm Swing diameter over cross slide: 250 mm Swing diameter in bed gap: 590 mm Center height: 210 mm Turning length in bed gap: 260 mm Spindle speeds: 16 (45-1,800) rpm Tailstock taper: MT 4 Quill stroke: 120 mm Quill diameter: 50 mm Spindle nose: DIN ISO 702-2 No. 6 Spindle bore: 52 mm Spindle taper: MT 6 Longitudinal feed: 17 / 0.05 - 1.7 m/min Cross feed: 17 / 0.025 - 0.85 m/min Total power requirement: 4.6 kW Machine weight approx. 1,340 kg Space requirement approx. 2,440 x 915 x 1,375 mm Fully equipped lead- and feed-screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mounting Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduations 0.04 / 0.02 mm - Four-way tool post - All guides adjustable via gib strips - Compound slide travel range ±90° - Guaranteed spindle nose runout accuracy better than 0.015 mm - Main spindle runs in oil bath - Gearwheels smoothly running, hardened and ground, supported by two adjustable precision tapered roller bearings - Handwheels decoupled and tested in accordance with EN 23125 - Two-channel forward/reverse switch tested according to EN 23125 - Switches with lifecycle calculation, tested according to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI selectable via control levers without changing gears - Forward/reverse switchable on bed slide via leadscrew - Central lubrication on bed slide - Base and machine bed cast in one piece from Meehanite casting - Leadscrew cover - Emergency stop device with foot pedal - Safety handwheels with disengagement function on X and Z axes - Tailstock adjustable by ±10 mm for taper turning - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment via clamping lever - Deep-ribbed prism bed, induction hardened and precision ground from grey cast iron - Coolant system with separate coolant tank, level indicator and oil separator; easy and complete draining and cleaning according to DIN - LED machine lamp in chip guard Models TH 4210D and TH 4215D with digital position indicator DPA21: - User-friendly membrane keypad, splash proof, sealed and anti-glare Codpfek Egrpox Admjrk - Glass scales Scope of delivery: - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MT 6 / MT 4 - Fixed center MT 4 - Change gear set - Position stop with fine adjustment - Initial fill with quality oil - Operating tools Including special accessories: OPTIMUM 3-jaw chuck, centrically clamping, Ø 250 mm Quick-change tool post SWH5-B set

Sąlyga: naujas, Ex-display promotion. NEW. No. 1 available for immediate delivery. CE warranty. The MACC SPECIAL 335 MS is a semi-automatic bandsaw designed for cutting solid bars and small-section profiles, offering high performance and excellent precision. Its robust construction provides the rigidity and accuracy required for the cutting unit. The blade drive features a dual-speed motor and a special gearbox with a bronze gear and a hardened, ground worm screw. Adequately sized flywheels and robust blade guides, equipped with sealed bearings and adjustable carbide plates, ensure reliable operation. Blade tensioning is managed via an electromechanical micro-switch by rotating the blade. The machine is fitted with safety devices on the flywheel covers and the blade, and includes a swiveling worktable for material support and a vice with rapid approach function. Operation: The cutting cycle is started with a start button, and the machine will: 1. Close the vice and start the blade motor; 2. Lower the saw bow to perform the cut; 3. Return the bow to the starting position; 4. Stop the blade motor; 5. Open the vice. Manual cutting mode available. Cutting speed (m/min): 38-77 Cutting thickness (mm): 1.2 Miter cutting range: From 45° left to 60° right Adjustable stop for repeat cuts Electropump for blade coolant: 0.06 kW Cutting capacity at 0° (Round / Square / Rectangle): 260 / 250x250 / 220x330 mm Cutting capacity at 45° left (Round / Square / Rectangle): 225 / 210x210 / 160x225 mm Csdpfsg S Ui Ajx Admsrk Cutting capacity at 45° right (Round / Square / Rectangle): 215 / 200x200 / 160x210 mm Cutting capacity at 60° right (Round / Square / Rectangle): 130 / 130x130 / 130x140 mm Blade dimensions: 3010x27x0.9 mm Weight [kg]: 415

Sąlyga: naujas, Model designation Credpfxegvkglj Admek Shark 281 SXI evo

Sąlyga: naujas, Metal band saw OPTIMUM OPTIsaw S275N - Showroom machine - Feed rate steplessly adjustable, pivoting ----- Technical Data ----- Swivel range: 0 - 60°, Cutting height: 150 mm, Cutting depth: 230 mm, Saw blade speed: 45 / 90 m/min, Saw blade length: 2,480 mm, Motor 400 V: 1.1 kW, Cedsu R S Hpopfx Admork Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg - new showroom machine -

Gamybos metai: 2023, Sąlyga: naujas, - Modern ergonomic design - Manual testing sequence with analog gauge (reading accuracy 0.2 HR units) - Easy operation and rapid testing procedure - Test space height approx. 185 mm - Test space depth approx. 160 mm Credpfx Aopbbc Hedmok - Dimensions 545 x 182 x 755 mm Test load ranges: 60 / 100 / 150 kg Test methods: HRA / HRB / HRC Standard scope of delivery: - Hardness tester - V-block support - Flat test table Ø150 mm - Flat test table Ø50 mm - 1/16" ball holder with ball - 120° Rockwell diamond indenter - Spindle guard - Accessory case

Sąlyga: naujas, mašinos/transporto priemonės numeris: Baureihe GSE / Neumaschine, Economic granulators: This GSE series is ideal for all injection molding and blow molding operations. It is generally suitable for all thin-walled plastic waste. These granulators are characterized not only by their attractive purchase price, but also by their robust, split steel/welded housing, ease of cleaning, and simple knife and screen changes. Thanks to the tangential housing geometry in combination with V-cut rotors (except GSE 300/300), even bulky and large-volume feed parts are accepted by the rotor and shredded. Crsdeghgbtepfx Admek Regrind transport: As standard, the granulators are equipped with an extraction system and bagging station. Optionally, a regrind collection bin is available, which, like the extraction tray, is made from stainless material.

Sąlyga: naujas, Model designation Credpegvkchefx Admek Shark 281 CCS