Vertikalus apdirbimo centras

Matsuura MAM72-25V PC 2

5-axis vertical machining center, used, year of manufacture 2007 / SN17224 / Control ON hours: 66,963 hours

Control System
MATSUURA G-Tech 30i (FANUC 30i MA) for 5-axis simultaneous machining

Travels
X-axis travel: 550 mm
Y-axis travel: 410 mm
Z-axis travel: 450 mm
B-axis: +110° to -110°
C-axis: 360°

Max. workpiece size: Ø250 x height 250 mm
Max. table load: 40 kg

Table indexing B- and C-axes: 0.001°

Pallet size: Ø130 mm
Max. workpiece size: Ø250 x height 250 mm
Max. pallet load: 40 kg
Pallet interface: Capto C6

Spindle
Standard speed range: 50 – 15,000 rpm
Spindle interface with face contact: BT 40 JIS B 6339 Big+
Spindle motor output with FANUC drive: 7.5/5.5 kW
Max. torque: 65.1 Nm up to 1,100 rpm

Traverse and positioning speeds
Rapid traverse:
Rapid traverse X, Y, and Z axis: 50,000 mm/min
B-axis: 30 min-1
C-axis: 50 min-1

Feeds:
X, Y, and Z axis: 1 - 50,000 mm/min
B-axis: 30 min-1
C-axis: 50 min-1

Tool Changer
Max. tool weight: 10 kg
Max. tool diameter with all positions filled: Ø96 mm
Max. tool diameter with adjacent stations free: Ø150 mm
Max. tool length: 300 mm

Guides
Axis guides: roller guides
Lubrication: permanent grease lubrication
Ball screws
Ball screw diameter X, Y, and Z axis: Ø36 mm
Pitch: 16 mm

Axis Drives
Power X, Y, and Z axis: 4.5/4.5/5.5 kW
Power B and C axis: 4.5/2.5 kW
Axial force X, Y, and Z axis: kN

Space Requirement* (standard machine)
Machine height above floor: 2,705 mm
Width: 2,281 mm
Depth: 3,665 mm
Codpfx Aowwk Dzehvjrh
*Dimensions may vary for the offered unit!

Machine Weight
Standard machine: 7,800 kg
Machine with PC-2: 8,600 kg

Connection Values
Total connected load:
Standard machine: 32 kVA
Machine with PC-2: kVA
Supply voltage: 3 x 400V, 50 Hz
Compressed air connection: 5.5 - 9.5 bar

5-axis simultaneous control

Tool magazine capacity upgrade from standard 30 to 40 tool stations

Pallet changer with 2 pallets, 130 mm diameter

Direct measurement system (Heidenhain)
on X, Y, and Z axes, supplied with sealing air

Coolant Systems
KNOLL coolant system, consisting of*:

- 1 scraper or hinged belt chip conveyor with lift pump and chip discharge to operator side (Type: 500 K-1/10, year 2010)

- 1 through-spindle coolant supply with coolant pump KTS25-50T,
output 31 l/min at 70 bar, 5.5 kW, coolant pressure switchable in 3 stages

- 1 external cooling with coolant pump, output 100 l/min at 1.4 bar

- 1 coolant shower with coolant pump, output 100 l/min at 1.4 bar

- 1 compact filter KF200, filtration capacity 200 l/min

- 2 spiral chip conveyors in machine, standard option

In-machine measuring

- RENISHAW OMP 60 touch probe for automatic zero point setting and workpiece measurement, automatically exchanged into spindle via tool changer

- OMRON pressure cell for tool length measurement and tool breakage monitoring

Subject to changes and errors in technical data and specifications, as well as prior sale!

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.