Matsuura MAM 72-63 V

Matsuura MAM 72-63 V

Gamybos metai: 2020, būklė: paruoštas naudoti (naudotas), A compressor system from the plant manufacturer Rico, consisting of two Atlas Copco compressors, two refrigerated air dryers, and an oil-water separation system (Beko, also by Atlas Copco), is available. Dusdpfxexdc Uvj Ac Djr 1) Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air delivery rate: 9.4 m³/min, operating pressure: 13 bar, motor power: 45 kW, motor speed: 4500 rpm, machine dimensions (L/W/H): approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. 2) Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45 kW, operating pressure: 18.5 bar, speed: 3000 rpm. 3) 2x refrigerated compressed air dryers Atlas Copco FX 15, air flow rate: 15 m³/min, operating overpressure: 13 bar, pressure drop: approx. 0.3 bar, refrigerant: R410A, refrigerant quantity: 2050g, max. inlet air temperature: 60°C, machine dimensions (L/W/H): approx. 900mm/750mm/1000mm, weight: approx. 160kg. 4) Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, controls: 2-6 compressors. 5) Oil-water separation system Beko ÖWAMAT 15, flow capacity range: 6 m³-30 m³/min, oil outlet: DN40, tank volume: 115.5 l, fill volume: 84.3 l, oil collection container: 2x10 l, max. operating pressure: 16 bar, machine dimensions (L/W/H): approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8,656 h, controller hours: 42,334 h. Documentation available. On-site inspection possible.

Gamybos metai: 2002, būklė: dilaminuotas dirbtuvėje (naudotas), Cutting, Drilling, and Marking Line for Beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing. - Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath. - Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke. - Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation. - Vertical clamping block with self-adjusting pressure plate. - Bevel cutting device for setting angles from 45° left to 35° right. - Material sensor for automatic change from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector mounted on the machine bed. Specifications: - Saw blade holder: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed speed: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting capacities: At 90° - Angle steel: 250mm - U-beam: 400mm - Double T-beam: 600mm - Wide flange beam: 1008x302mm - Special flange beams: 1000x450mm Miter cutting: IPBv Beam - 75°: 1008x302mm - 60°: 910x302mm - 45°: 716x304mm - 40°: 716x304mm - 35°: 478x307mm IPBs Beam - 75°: 1008x402mm - 45°: 524x357mm IPE Beam - 45°: 600x220mm Duedshzbipepfx Ac Dor DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-beam (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra-wide flange beams: 1,200x500mm Number of drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8-40mm RPM: 150 - 1,100 Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min Spindle feed rate: 0-500mm/min Spindle rapid positioning: 15,000mm/min Automatic tool changer: 5 tools per unit (total 15 positions) Total power: 45KW MARKING UNIT FEEDING: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS 30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL SECTIONS MOST ROLLERS ARE MOTORIZED Approximate total installation length: 60 linear meters from infeed to outfeed. *Installation layout available upon request.

Būklė: naudotas, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT50 - Spindle drive power: 40 [kW] - Spindle speed: 12,000 [rpm] - Gearbox - Number of spindle speed ranges: 2 LINEAR AXES - Travel X/Y/Z axes: 2400/1650/1750 [mm] - Rapid traverse speed (X/Y/Z): 42 [m/min] - Feed rate (X/Y/Z): 20 [m/min] SWIVEL AXIS B - Travel: 360 [degrees] - Minimum resolution: 0.001 [degrees] TOOL CHANGER - Tool changer type: Bras charger - Number of tools in magazine: 116 - Tool change time: 3.8 [sec] PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1600 x 1250 [mm] - Number of pallets: 2 - Max. pallet load: 5000 [kg] - Distance from table centre to spindle nose: 100 - 1750 [mm] - Max. workpiece diameter: 2500 [mm] - Max. workpiece height: 1850 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive capacity: 86 [kVA] WEIGHT AND DIMENSIONS - Required space: 9,485 x 6,155 [mm] - Machine height: 4,370 [mm] Dusdpfx Aow Ephbsc Dor - Machine weight: 50,000 [kg] MACHINE HOURS - Operating hours: 15,446 [h] ACCESSORIES - Controller: Fanuc 31i-model B5 Interface: Ethernet / RS232 / USB / PCMCIA - SOFT SCALE II - Electronic hand wheel - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 70 [bar] * internal coolant supply (IKZ) * with paper filter * with coolant chiller * with rinse gun * with cabin wash - Chip conveyor - Spindle cooling - Tool probing system - Workpiece probing system: Renishaw RMP60 - Tool breakage monitoring: SOFT AC - Number of pallets: 2 - Vise - Tool holder

Būklė: geras (naudotas), Gamybos metai: 2008, Stalo matmenys 1600 x 750 mm, stalo apkrova 1500 kg, judesiai XYZ 1525 x 762 x 625 mm, greitieji poslinkiai 24 m/min, veleno galia 18,5 kW, veleno greitis 6 000 aps./min., automatinis įrankių keitiklis (ATC) – 40 vietų, veleno kūgis BT50, aušinimas per veleną, drožlių transporteris, „Fanuc 21i“ valdymas. Dujdpfoxwytcsx Ac Dsr

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2013, veikimo valandos: 15 000 h, Pagrindinė pavara Špindelio apsukų diapazonas: 12 000 Įrankio kūgis: Capto C6 Ašių skaičius: 5 Judėjimas Y ašies eiga: 230 mm A ašies eiga: 1550 mm Rušinys Rušinio skersmuo virš lovos: 1000 mm Šis penkiaašis DOOSAN Puma MX2600ST frezavimo-staklės centras pagamintas 2013 metais. Maksimalus tekinimo diametras – Ø 760 mm, detalės ilgis – iki 1540 mm, strypo įvorės talpa – Ø 76 mm. Įrengtas Fanuc 31i-A valdymo sistema, du špindeliai su iki 4000 aps./min. greičiu ir frezavimo špindelis – 12 000 aps./min. Įrankių žurnalas su 80 pozicijų ir drožlių transporteris. Pasinaudokite galimybe įsigyti šį DOOSAN Puma MX2600ST frezavimo-tekinimo centrą. Dėl daugiau informacijos susisiekite su mumis. Taikymo sritys Dujdpfxsx E Eams Ac Djr Tekinimas

Būklė: geras (naudotas), Gamybos metai: 2007, Mit der Hand gezeigte Teile sind nicht im Lieferumfang enthalten. Technische Details siehe Abbildung. Duedpfx Ajrpn Dvjc Der

Būklė: beveik kaip naujas (naudotas), Los compresores GA (W) VSDs (Accionamiento de Velocidad Variable) son compresores de tornillo de una sola etapa, inyectados con aceite, impulsados por motor eléctrico y estacionarios. Djdpfewxwxzox Ac Dour El sistema de refrigeración está equipado con un enfriador de aire y un enfriador de aceite. Los modelos GA VSD son compresores enfriados por aire; el aire de refrigeración es generado por un ventilador. Características principales: - Temperatura máxima de entrada de aire: 40ºC - Temperatura máxima de salida del agua de refrigeración: 50ºC - Temperatura aproximada del aire a la salida de la válvula: 30ºC - Capacidad aproximada de aceite: 17,9 L

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2013, Cutting length: 1060 mm Cutting angle: 2 ° strokes per minute: 50 spm Motor power: 4.0 kW Machine weight approx.: 0.67 t Motorized guillotine shear, type 165.03 Technical specifications: Working width (cutting length): 1060 mm Maximum sheet thickness: 2.5 mm at 400 N/mm² Machine stroke rate: approx. 50/min Cutting angle: 2° Hold-down opening width: 5 mm Djdpfxsua Iulo Ac Dsur Factory setting for blade clearance: 0.1 mm - Digital display for backgauge - Front table support - Operating manual available

Būklė: naudotas, Gamybos metai: 2015, x-travel 560 mm y-travel 560 mm z-travel 660 mm Control: M 730 BM MAPPS IV Distance spindle center to table: 80 - 640 mm Distance spindle nose to table center: 70 - 730 mm Max. spindle speed: 12,000 rpm Main spindle drive power: 15 / 11 kW Tool holder: SK 40 Spindle diameter at front bearing: 80 mm Number of pallets: 2 stations Working height: 1,050 mm Pallet size: 400 x 400 mm Max. workpiece weight: 400 kg Max. workpiece diameter: 630 mm Max. workpiece height: 900 mm B-axis: 0.001° Indexing time 90°: 1.3 sec Pallet change time: 8.0 sec Number of tool stations: 60 positions Tool holder: SK 40 Max. tool diameter: 70 mm Max. tool diameter with adjacent slot empty: 170 mm Djdpfx Acsx Hpytj Deur Max. tool length: 450 mm Max. tool weight: 8 kg Tool-to-tool change time: 0.9 sec Chip-to-chip change time: 2.8 - max. 9.9 sec Feed rate max.: 60,000 mm/min Rapid traverse (X / Y / Z): 60 m/min Total power requirement: 35 kVA Machine weight approx.: 7.9 t Space requirement approx.: 5.5 x 3.5 x 2.6 m CNC horizontal machining center MORI SEIKI - NHX 4000 - Pallet changer - WITHOUT clamping towers

Būklė: geras (naudotas), galia: 0,018 kW (0,02 AG), X ašies eiga: 2 200 mm, Y ašies eiga: 800 mm, Z ašies eigos atstumas: 800 mm, bendras svoris: 15 000 kg, stalo ilgis: 2 600 mm, stalo plotis: 850 mm, veleno greitis (maks.): 8 000 aps./min, Įranga: drožlių transporteris, FEATURES Table: 2600 x 850 mm Dedpsr I Aumefx Ac Dsur X-axis travel: 2200 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Spindle speed: 8,000 RPM Control: Fagor 8055 - MC Motor power: 15 / 18.5 kW Tool magazine capacity: 40 Tool holder: BT 40 Fourth axis (IRTS rotary table): 350 mm ⌀ Electronic handwheel Coolant through spindle Chip conveyor Air cooling Dimensions with chip conveyor (W x L x H): 4029 x 7050 x 3100 mm Weight: 15,000 kg