Apdirbimo centras

Matsuura H Plus 405 PC6

Būklė: geras (naudotas), Gamybos metai: 2003, Apdirbimo centras Fgjdpjltlx Nsfx Afdoc Gamintojas: Matsuura Tipas: H Plus 405 PC6 Pagaminimo metai: 2003 CNC valdymas: Fanuc G-Tech 16i Judėjimo ašys X/Y/Z: 600 x 600 x 600 mm Stalo dydis: 500 x 500 mm 6 padėklų keitiklis Įrankių magazinas: 120 pozicijų 4-oji ašis Knoll aukšto slėgio sistema Vidinis aušinimas 70 bar

Būklė: geras (naudotas), Gamybos metai: 2011, Ref. No.: 10565 Manufacturer: TOYODA Model: FH 630 SX Year of manufacture: 2011 Control system: CNC Controller: Fanuc 31i-A Location: Halberstadt Country of origin: Japan Serial No.: NS3XXXX X-axis travel: 1000 mm Y-axis travel: 800 mm Z-axis travel: 850 mm B-axis: 360° Spindle/Table distance: 200 - 1050 mm Max. workpiece weight: 800 kg Max. tool weight: 27 kg Max. tool length: 545 mm Max. tool diameter: Ø120 mm Max. workpiece size (L x W x H): Ø1000 x 1000 mm Tool taper: BT-50 Tool magazine with: 60 pcs. Spindle speed: 6000 rpm Rapid traverse X/Y/Z: 60 m/min Tool-to-tool change time: 2.4 sec Machine length: 7000 mm Machine width: 3500 mm Machine weight approx.: 20.1 t Pallet height: 1200 mm Positioning accuracy (X, Y, Z): ±0.003 mm Repeatability (X, Y, Z): ±0.0015 mm Pallet payload: 800 kg Axial force: 14,700 N Additional information: Fedpfxexvw I Ij Afdjgc - Cutting feed (same for X, Y, and Z axis): 0.001 – 30 m/min - Distance between spindle center and top edge of the area: 100 mm – 900 mm - Table size range: 630 mm - Subtable positioning: 1° - Rotary table positioning: 0.001° - Tool type used: SK 50 - Hydraulic oil: 53 l - Slideway/spindle head lubrication: 3.0 l - Coolant for spindle & ball screw head: 37 l The machine can be inspected under power by prior arrangement.

Būklė: geras (naudotas), Gamybos metai: 2008, Nuorodos Nr.: 10564 Gamintojas: TOYODA Tipas: FH 630 SX Pagaminimo metai: 2008 Valdymo tipas: CNC valdymas Valdymas: Fanuc 31i - A Sandėliavimo vieta: Halberstadt Kilmės šalis: Japonija Serijos Nr.: NS2XXX X eiga: 1000 mm Y eiga: 800 mm Z eiga: 850 mm B ašis: 360° Didžiausias ruošinio svoris: 800 kg Didžiausias įrankio svoris: 27 kg Didžiausias įrankio ilgis: 545 mm Didžiausias įrankio skersmuo: Ø 120 mm Didžiausias ruošinio dydis (ilgis x plotis x aukštis): Ø 1000 x 1000 mm Įrankio laikiklis: BT - 50 Įrankių magazinas: 60 vnt. Veleno greitis: 6000 aps./min Staklių ilgis: 7000 mm Staklių plotis: 3500 mm Staklių svoris apie: 20,1 t Papildoma informacija: - Įrengta aukšto slėgio aušinimu (IKZ) ir drožlių transporteriu - NC rotacinis stalas 360.000 x 0,001° Fodexvw Izspfx Afdjgc Mašiną galima apžiūrėti prijungtą prie elektros pagal susitarimą.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2004, veikimo valandos: 9 900 h, MURATEC MD 200G Year of manufacture: 12 / 2004 Control unit: Fanuc 18 it Integrated gantry loading system with travel distances 2100 mm + 2250 mm Portal Z-axis stroke increased by 100 mm ("Z" axis shift) Gantry with increased load capacity (12+12 kg) Muratec WFL 20-280 parts feeding system No. 2 Autoblock BH 250 power chucks No. 2 servo-controlled 10-position tool turrets for live tooling Static tool holder kit No. 2 radial live tool holders No. 2 axial live tool holders “C” axes for both spindles with continuous 360,000 positions Coolant + air outlet above left and right spindles “PEL” device on right spindle Belt-type chip conveyor with rear discharge Rigid tapping software TOOL MONITOR software Fgsdow E D Tlepfx Afdec TOOL LIFE MANAGEMENT software CE marking

Būklė: geras (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1050 mm Y ašies eiga: 920 mm Z ašies eiga: 990 mm Atstumas nuo padėklo paviršiaus iki veleno centro: 75 - 995 mm Atstumas tarp padėklo centro ir veleno galvos: 150 - 1.140 mm Padėklo dydis: 630 x 630 mm Maksimali stalo apkrova: 1.200 kg Veleno sūkių dažnis: 45 - 15.000 aps./min Įrankio laikiklis: HSK 100 Fgsdpfx Aoy Nkphefdoc Įrankių stotys: 60 Didžiausias įrankio svoris: 20 kg

Būklė: naudotas, Gamybos metai: 2001, Technical details: Fgjdjy D Nxdjpfx Afdoc Turning diameter: 120 mm Turning length: 100 mm CNC control: Fanuc Spindle 1 power: 7.5 kW Spindle 1 speed: 4,500 rpm Spindle 2 power: 7.5 kW Spindle 2 speed: 4,500 rpm Distance between spindle noses: 600 mm Turret No. 1 stations / driven: 15/15 Driven tool power Turret 1: 2.7 kW Driven tool speed Turret 1: 4,000 rpm Turret No. 2 stations / driven: 15/15 Driven tool power Turret 2: 2.7 kW Driven tool speed Turret 2: 4,000 rpm Traverse paths X/Z Turret 1: 250 / 300 mm Traverse paths X/Z Turret 2: 250 / 920 mm Bar capacity Spindle 1: 51 mm Bar capacity Spindle 2: 51 mm Power chuck: 165 mm Spindle bore Spindle 1: 62 mm Spindle bore Spindle 2: 62 mm Space requirement approx.: 3,700 x 2,300 x 3,000 mm Machine weight approx.: 5,600 kg Used CNC sub-spindle turning center with gantry loader - 165 mm chuck on both spindles - 2x 15-station turrets with driven tools - Automatic workpiece loader with turnover station 14-station magazine, left Maximum part size Ø 120 x 100 mm Double gripper capacity: 2 x 3 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, A complete machining line is available, consisting of four Toyoda machining centers, Palltec transport and automation system, filtration units, chip conveyors, and coolant systems. Fjdpfx Asy Ey Tuefdjgc 1) 4x CNC horizontal machining centers Toyoda FH 630 SX, year of manufacture (3 units/1 unit): 2007/2008, control: Fanuc 31i, pallet dimensions X/Y: 630mm/630mm, travel X/Y/Z: approx. 1050mm/900mm/1050mm, max. workpiece diameter: 1170mm, max. workpiece height: 1250mm, max. pallet load: 1500kg, spindle taper: BT50, spindle speed: 6000rpm, tool magazine: Fanuc FTS 330, tool positions: 330, operating hours range: approx. 65,000h to 76,000h. All machining centers feature identical tool management, but have different operating hours within the range specified above. 2) Rail-Guided Vehicle (RGV) System Palltec FPA 630, year of manufacture: 2006. 3) Central master control system with Windows 7 Professional, interfaces: CNC/RGV/peripherals. The production line is equipped with all necessary peripheral devices such as filtration units, chip conveyors, and coolant systems from manufacturers Knoll and Hyfra. Documentation available. On-site inspection possible.