Horizontalios paviršiaus šlifavimo staklės

MATRA MF 60/30

Būklė: naudotas, Gamybos metai: 1975, Technical specifications: Grinding length: 600 mm Grinding width: 300 mm Workpiece height: 450 mm Total power requirement: 8 kW Machine weight approx.: 2.2 t Space requirement approx.: 2.8 x 3.0 x 2.0 m Grinding spindle speed: 1440 / 2905 rpm with magnetic chuck 600 x 200 mm Fpjdpfx Abjvb Dmlobjd automatic vertical feed

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, GF AgieCharmilles CUT 300 Year of manufacture: 2013 Charmilles Millenium Control Travel paths (X / Y / Z): 550 x 350 x 400 mm Travel paths (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes automatic drop-door tank Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Cutting speed of 340 mm²/min Best surface finish: Ra 0.10 µm Available wire diameters: 0.15 to 0.33 mm Dimensions of the complete system: 2600 x 2600 x 2340 mm Total weight of the system: 3,300 kg The machine will be cleaned, fully overhauled, and tested on all functions after receipt of order. You will receive a 6-month warranty on the machine. Fodpfsw D Accsx Abbepd We are happy to offer you machine commissioning as an additional service.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical components (checked and/or replaced) Grinding wheel headstock Disassembly, cleaning of parts, replacement of worn and defective parts, motor overhaul, bearing replacement, belt replacement, spindle disassembly, replacement of seals and O-rings + adjustment. Newly painted. Workpiece headstock Disassembly, cleaning of parts, replacement of worn and defective parts, motor overhaul, belt replacement. New spindle bearings. Newly painted. Tailstock Disassembled, inspected, overhauled. Hydraulics Disassembled, motor check, replacement of hoses, defective and worn parts. Hydraulic block inspected. X Axis Disassembly, replacement of worn parts such as O-rings, seals, rings, etc., overhaul of hydraulic piston, grinding of tables. Z Axis Disassembly, grinding of tables, replacement of worn and defective parts, hydraulic piston overhaul, newly painted. Electrical cabinet Complete inspection, various relays replaced. Painting Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer’s protocol. Inspection and cleaning of various accessories. Origin CH Voltage 380 / 50 / 3 Net weight approx. 2200 kg Customs tariff number 8460.2920 TECHNICAL SPECIFICATIONS Nominal centre distance 600 mm Max. centre distance (extended headstock) 750 mm Centre height, standard 125 mm Centre height with interchangeable shoes for headstocks 175 to 250 mm Max. workpiece diameter (125 mm centre height) 250 mm Max. workpiece diameter with interchangeable shoes 350 to 500 mm Table swivelling in either direction 10° Max. length for surface grinding (max. width = 200 mm) 900 mm Table speed with continuously variable hydraulic control up to approx. 6 m/min Table reversal dwell time 0-5 sec. Wheel for external grinding, diameter-width-bore 400x50x127 mm Wheel for surface grinding 250x13x76 mm Grinding spindle speeds 1500/1700/2200/3600 rpm Grinding headstock swivel 270° With index every 90° Vertical movement of grinding headstock, centre height 125-350 mm Cross travel of grinding headstock 285 mm Hydraulic rapid advance/retract stroke 40 mm Intermittent feed of the wheel by table reversal 0.001-0.03 mm/dia Continuous plunge grinding feed 0-0.9 mm/dia Micrometric feed stop, graduated 0.001 mm/dia Workpiece headstock swivel 360° Fjdpew U Ry Nofx Abbopd Continuously variable workpiece spindle speed, standard/special 20-400 / 10-400 rpm Workpiece headstock/tailstock internal taper 5/3 Morse Grinding headstock motor, approx. 4 HP All technical details are given without obligation and subject to errors or omissions.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Grinding length: 973 mm Centre height: 250 mm Maximum swiveling of workpiece table: +6° / -9° Centre taper: MT5 Maximum travel of grinding spindle headstock: 100 mm Maximum swiveling of grinding spindle headstock: +45° / -30° Maximum grinding wheel diameter: 500 mm Fpsdpjwhp Dnsfx Abbed Speed range: 32 - 600 rpm Maximum workpiece weight between centres: 400 kg Internal grinding device, maximum grindable bore: 160 mm Machine weight: approx. 5,000 kg

Būklė: geras (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 1 050 mm, padavimo eiga Y ašimi: 360 mm, padavimo ilgis Z ašis: 500 mm, X ašies eiga: 1 050 mm, Y ašies eiga: 360 mm, Z ašies eigos atstumas: 500 mm, bendras svoris: 3 000 kg, Įranga: dokumentacija / vadovas, Tiger FO 135 universal milling machine Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully operational. Axis movements are smooth, and the guideways are in good condition, featuring an automatic lubrication system. The table is well maintained and shows minimal signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, enabling work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travels: ➢ X-axis (longitudinal): 1,050 mm ➢ Y-axis (cross): 360 mm ➢ Z-axis (vertical): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed ranges: ➢ Vertical axis: 33 ÷ 1,560 rpm, 12 speeds Fedpfx Aorqwbiebbspd ➢ Horizontal axis: 35 ÷ 1,550 rpm, 12 speeds • Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm • Variable feed rates ➢ Stepless (infinitely variable) feed: 0 ÷ 1,500 mm/min • Rapid traverse: ➢ X & Y axes: 3,000 mm/min ➢ Z axis: 1,500 mm/min • Universal milling head with 80 mm manual quill stroke • Automatic lubrication with electric pump • Low-voltage electric controls via side arm push-button panel • Star-delta starter • Siemens magnetic thermal overload protection • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories • Counter supports for milling arbor • Milling arbor ø32 mm

Būklė: geras (naudotas), Magnetic table 455 x 170 mm Fodpfxotu Il Tj Abbjpd Digital readout Water tank Dressing device Wet grinding unit

Būklė: naudotas, Gamybos metai: 1995, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: XXX,

Būklė: labai geros būklės (naudotas), Gamybos metai: 1970, Modelis: AR 1000 Fpodpfx Abexfvyzsbsd - Gamybos metai: 1970–1991, geometriškai atnaujinta - Būklė: gera–labai gera - Šlifavimo skersmuo: maks. 350 mm - Šlifavimo ilgis: 1000 mm - Gulsčio šlifavimo ilgis: 100 mm - Centrinio aukštis: 180 mm - Centrinis kūgis: 60 MK4 - Šlifavimo rato matmenys: maks. 500 Ø x 300 Ø x 80 mm - Šlifavimo galvutė pasukama: +/- 45° - Matmenys: 3,2 x 1,7 x 1,6 m (I x P x A) - Užimamas plotas: 4,13 x 2,02 x 1,6 m (I x P x A) - Svoris: apie 4.300 kg - Darbinė įtampa: 380 V - Galia: 7,5 kW (iš viso 11,6 kW)

Būklė: labai geros būklės (naudotas), Gamybos metai: 1983, Funkcionalumas: visiškai funkcionalus, Used CNC cylindrical grinding machine Make: FORTUNA Fpsdpjv Eyr Sefx Abbsd Model: T23 S1000 ASW 45 CNC Year of manufacture: 1980

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, šlifavimo ilgis: 650 mm, šlifavimo plotis: 300 mm, šlifavimo disko skersmuo: 160 mm, bendras svoris: 2 550 kg, galia: 4 kW (5,44 AG), Brand: CCP - STANKOIMPORT Model: 3E711B Grinding dimensions: 650 x 300 mm (X, Y) - 320 mm (Z) Magnetic table surface: 630 x 200 mm Maximum table load: 150 kg Distance from spindle axis to table surface: 80 - 445 mm Maximum wheel head travel: 365 mm Manual table travel: (700 mm, 250 mm) Table feed speed: 2 - 30 m/min Cross feed speed: 0.01 - 1.5 m/min Vertical feed graduation: 0.002 mm Vertical micro feed graduation: 0.0005 mm Cross feed graduation: 0.5 mm Fpsdpfxsqy H Dpe Abbod Vertical micro feed graduation: 0.001 mm Cross travel per revolution of dial: 5 mm Vertical travel per revolution of dial: 0.20 mm Automatic cross feed, longitudinal table stroke: 0.2 - 30 mm Automatic wheel head feed: 0.002 - 0.08 mm Grinding wheel dimensions: 250 x 76 x 40 mm Minimum grinding wheel diameter: 160 mm Spindle motor power: 4 kW Weight: 2,550 kg.