Teleskopinis krautuvas

Manitou MRT2550+ Telescopic forklift w/ pallet forks

Sąlyga: naujas, Thread diameter: M3 - M16 mm Hfedpfefg U Sqex Af Ieb Infinitely variable speed, max. 187 rpm Working range: 180 - 2000 mm Motor power: 0.7 kW Electric tapping machines for thread sizes M3 - M16, adjustable angle. Includes 9 quick-change chucks with slip clutch. Adjustable via display: Variable speed, adjustable depth, material selection, selection of main rotation direction, thread selection. Optional accessories: Clamping table with T-slots: 990x700x800 mm Magnetic base Also available for: M14 to M24 and M27 to M33.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Offered for sale is an external cylindrical grinding machine EMAG Weiss WPG 7 – high-precision external cylindrical grinding in a compact design. The WPG 7 requires only a footprint of 1,800 x 2,400 mm. This machine is ideally suited for machining small shafts or pinions. The WPG 7 can be loaded manually or equipped with automated solutions such as chain conveyors or linear gantries. CONTROL SYSTEM Fanuc 0i TECHNICAL DATA Workpiece length: max. 250 mm Grinding diameter: max. 80 mm Centre height: 100 mm Centre width: 380 mm Workpiece weight: max. 30 kg Grinding wheel diameter: max. 500 x 80 mm Hodpfx Afotlrkbo Isfb Price, delivery time, and machine configuration upon request.

Sąlyga: naudotas, Gamybos metai: 2007, Swing diameter: 470 mm Turning length: 2500 mm Control: Siemens Sinumerik 840 D Working height: 1300 mm Swing diameter over cross slide: 750 mm Hedew Rf Tiopfx Af Isfb Swing diameter over bed: 780 mm Quill diameter: 160 mm Internal taper: MK 5 Number of tools: 48 Max. tool weight: 15 kg Max. tool length: 500 mm Total power requirement: 123 kVA Machine weight approx.: 27 t Space required approx.: 8.4 x 4.0 x 3.3 m C-axis: - Speed range: up to 30 rpm - Max. torque on rotary spindle (60% DC): 930 Nm - Positioning accuracy: 0.005 degrees Slide travels: - X-axis: 720 mm - Z-axis: 4072 mm Rapid traverse: - X-axis: 18 m/min - Z-axis: 30 m/min Feed rate: - X-axis: mm/min - Z-axis: mm/min Workpiece spindle: - Spindle nose as per DIN 55026: A 11 - Through-bore: 123 mm - Diameter in front bearing: 200 mm - Oriented spindle stop: 0–359 degrees Workpiece spindle drive with 2-stage gearbox: - Drive power at 100/60% DC: 37/45 kW - Total speed range: 10–2,500 rpm - Number of speed ranges: 2 - Speed range I: 10–775 rpm - Speed range II: 20–2,500 rpm - Max. torque at 60% DC: 2,083 Nm (up to 186 rpm) Equipment/accessories: - Forkardt power chuck with one set each of hard and soft jaws - Hydraulic steady rest - Tailstock with live center - Chip conveyor - Coolant system - 5 HSK 100 A tool holders - Technical documentation

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, veikimo valandos: 15 h, keliamoji galia: 6 000 kg, kėlimo aukštis: 26 000 mm, kuro tipas: elektrinis, stiebo tipas: teleskopinis, statybinis aukštis: 3 100 mm, galia: 115 kW (156,36 AG), šakių ilgis: 1 200 mm, tuščias svoris: 18 000 kg, bendras ilgis: 8 080 mm, pavaros tipas: Elektro, statybos plotis: 2 500 mm, Rotating telehandler Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 km/h Condition: New machine Technical condition: New Front tires type: Pneumatic Front tires size: 18 - 22 Front tires condition: 80 - 100% Rear tires type: Pneumatic Rear tires size: 18 - 22 Rear tires condition: 80 - 100% Hjdpfxexg Utvs Af Iofb Description: 100% electric. The MRT 2660 e is a truly versatile tool for your material handling operations offering zero emissions, low noise levels, and minimal energy consumption. 6,000 kg maximum capacity, 22 m lifting height. Lithium-ion battery, ensuring: low maintenance, opportunity charging (partial and frequent battery recharging) possible, and long service life. Modular design: Option to add a second battery for extended autonomy or a range extender (combustion engine to recharge the battery) for hybrid operation. All the benefits of the MRT Vision+ (visibility, performance, comfort) in a fully electric version. 3rd hydraulic control valve, heating, fully enclosed cab, air conditioning.

Sąlyga: naudotas, Gamybos metai: 2017, veikimo valandos: 1 761 h, Paskirtis: Statybos darbai Pavara: Vikšrinė Hfedpfx Aov D U D Tjf Ieb Dėl daugiau informacijos kreipkitės į Martin Gervink.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, keliamoji galia: 4 200 kg, kėlimo aukštis: 7 000 mm, kuro tipas: dyzelinas, stiebo tipas: teleskopinis, statybinis aukštis: 2 530 mm, tuščias svoris: 8 000 kg, bendras ilgis: 4 730 mm, pavaros tipas: Diesel, statybos plotis: 2 310 mm, Teleskopinis krautuvas, standus rėmas Hjdpfx Afexgy Hhj Iofb Stiebo tipas: Teleskopinis Techninė būklė: Naujas Padangų dydis priekyje: 460/70 R 24 Michelin XCML Padangų dydis gale: 460/70 R 24 Michelin XCML

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2023, keliamoji galia: 25 000 kg, kėlimo aukštis: 3 500 mm, laisvas kėlimas: 1 750 mm, kuro tipas: dyzelinas, stiebo tipas: dupleksas, statybinis aukštis: 3 670 mm, galia: 185 kW (251,53 AG), šakių ilgis: 2 400 mm, pavaros tipas: Diesel, Diesel forklift Load center: 1200 mm Fork width: 250 mm Fork thickness: 110 mm Mast type: Duplex Transmission: Dana TE14000 Condition: New machine Technical condition: New Front tire type: Pneumatic Front tire size: 14.00 x 24 Rear tire type: Pneumatic Rear tire size: 14.00 x 24 Hfedpfxsq D S Dke Af Ieb Sideshift, fork positioner, 3rd valve, 4th valve, Kalmar comfort cabin: EGO air conditioning (ECC) with fresh air filter, tinted windows, laminated glass windscreen, door holder (left-hand side), sunblind for roof window, air-suspended and leather-reinforced Grammer Actimo XL driver’s seat with seat heating, lap belt, and horizontal suspension, radio with DAB+/CD/RDS/MP3/USB/AUX/Bluetooth/hands-free/streaming function, 12/24V voltage converter including 2 x 12V and 2 x 24V sockets, load weight indicator in the display, directional selector switch on the lift hydraulics lever, 2 additional external mirrors mounted on the B-pillar, LED beacon, height-adjustable, KALMAR SV/GV fork carriage with central leveling, width B = 3,000 mm, Kalmar forks, fork length l = 2,400 mm, fork section b x a = 250 x 110 mm, Terminal West quick-change system for SV/GV fork carriage, forks tapered 500 mm from fork shaft to 15 mm at tip, raised air intake with pre-separator, engine heater 220 V, pressure accumulator for lift hydraulics, separate tanks for brake and working hydraulics including hydraulic oil cooling, mud flaps on drive axle, mud flaps on steering axle, anti-slip coating on front wheel covers and tank, 2 extra LED headlights on mast below standard headlights, 2 extra LED headlights on the front cabin corners facing forward, 6 extra LED headlights on rear cabin corners with protective guard, 2 extra LED headlights on wheel covers, electronic inching – enables precise low-speed driving while lifting at full speed, acoustic reversing alarm – multi-frequency bass tone (audible only close to the machine), automatic centralized lubrication on steering axle and fork carriage, 6 kg powder fire extinguisher (EN3), reverse camera mounted on cab roof with color monitor in cabin, camera in mast connected to cabin monitor (in combination with reverse camera), HD 7" QUAD-view monitor, integrated tire pressure monitoring in display.

Sąlyga: naudotas, Gamybos metai: 1979, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 17065, Manufacturer: Henning Model: U6/1000 Machine No.: 17065 Year of Manufacture: 1979 Weight: 1,100 kg General / Technical Data: Used mechanical vertical broaching machine Henning, in operational condition Hfsdeup Uzfjpfx Af Ieb Pulling force: 6,000 kg (60 kN) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / Working area: 600 x 460 mm / 480 x 340 mm Table opening: Ø 170 mm with eccentric table insert with Ø 90 mm hole for standard broaching mandrels (Rausch system) Workpiece diameter: unlimited Dimensions (H x W x D): 1,650 mm x 1,200 mm x 700 mm (H = table height from floor without superstructure) Motor: 7.4 / 10 kW Power supply: 380 Volt / 50 Hz Accessories / Special Features: - Integrated coolant system - Return circuit with dual-operation mode - Machine documentation - Automatic jaw opener in the lower pull bridge position (tool removal) - Tool clamping with universal jaws for flat shanks according to DIN 1416 BL 6 Remarks: The machine is in its original condition, functionally tested. The machine is mechanically driven via a trapezoidal-thread spindle and a geared motor. Unlike most mechanically driven broaching machines where the trapezoidal spindle forms both the drive and guide element, this machine features additional guide columns. This ensures extra column guidance and very robust construction. The dual-spindle drive is ideal for continuously consistent cutting speeds, even at higher pulling forces. The machine is stored at our warehouse and can be inspected under power.

Sąlyga: naujas, Bernardo TM 16 BLO/ R 1100 Electric Tapping Machine Technical Specifications Tapping capacity*: M3 - M16 Max. speed: 120 - 325 rpm Adjustable angle: 0° - 90° Max. working radius: R 1100 mm Quick-change chuck DIN 371: M3 / M4 / M5-6 / M8 / M10 DIN 376: M12 / M14 / M16 Motor power: 600 W Voltage: 230 V Approx. weight: 26 kg * Material strength 400 N / mm² Scope of delivery • Operation via touchscreen • Digital drilling depth display • Micro-spray system • Chip blower unit • Quick-change adapter • Quick-change chuck as per DIN • Electric motor Hfjdpfx Afopag Npj Iob • 90° angle adjustment • Mounting flange Features • Equipped with micro-spray system as standard for constant cooling and minimal coolant consumption • Includes blower unit for removing chips, providing optimal view of the drilled hole • Includes quick-change chuck for use of taps for through and blind holes • Swivelling motor unit for tapping at any desired angle between 0° and 90° • Higher accuracy compared to manual tapping; precise vertical (90°) threads are guaranteed • High productivity and significant time savings over manual tapping • Quick-change chuck with integrated slip clutch prevents tap breakage • Includes swinging arm with large radius for easy positioning of the tap on the workpiece • Suitable for tapping in steel, stainless steel, aluminium, and non-ferrous metals Price: Base frame 900 x 600 mm with 2 drawers for TM series: €830.00

Sąlyga: geras (naudotas), Gamybos metai: 2021, mašinos/transporto priemonės numeris: 2-021-810-002, Offer 25221 Technical Data: - Load capacity: 2000 kg - Outreach: approx. 3000 mm - Slewing radius: approx. 180° - 2 lifting speeds: approx. 3.0 + 0.75 m/min - Hook travel: approx. 3000 mm - Operation of the chain hoist via remote pendant control - Manual slewing of the jib + trolley travel - Jib IPE 300 Hfodpswvtpdofx Af Ieb - Overall height with slewing arm support: approx. 1220 mm - Electrical connection: 400 V - Weight: approx. 500 kg - Test log/book