Krautuvas sumontuotas ant sunkvežimio

MAN TGM 26.320 BL 6x2 Böcker AK 46/6000 + JIB Kran

Gamybos metai: 2004, Sąlyga: dilaminuotas dirbtuvėje (naudotas), No. 2054 1 used, partially overhauled and function-tested extruder Alphatec Type AE-S 75.28 Screw diameter 75 mm – 28 L/D Drive 75 kW – AC Screw speed adjustable up to 80 rpm 1x degassing zone with vacuum pump Hnjdpfeiyya Ajx Af Ieg Installed heating capacity approx. 30 kW 3x temperature control zones for downstream equipment Control cabinet – NEW control system – type Inspection possible at our facility in Wuppertal. Additional extruders available.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2010, Large, semi-automated Pace cutting system Polar 137 XT-Autotrim with stack lift, jogging unit with counting scale, gripper transport system, turning gripper, and unloader, built in 2010, with approximately 5.43 million cuts. Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed into the jogging unit by the operator, jogged, and then automatically transferred by the Autotrans gripper system from behind the jogger onto the rear table of the high-speed cutter and rotated as required. After cutting, the Transomat automatically places the layers onto a pallet, while cutting can continue simultaneously. Polar Stack Lift LW 1200-4 Platform dimensions: 80x126 mm Load capacity: 1,200 kg Hnjdpfx Afoxd U Sao Iog Equipped with steplessly adjustable reflex light barriers for automatic lifting or lowering. Jogging Unit RAH-4 with air removal roller and discharge for rear table feeding Usable format up to 75 x 105 cm. The jogged material is automatically discharged to the rear into the STR stack rack. The Autotrans gripper transport system then handles the layer transport to the rear table of the high-speed cutter. Sheet scale – Polar Counting Scale Avery Weigh-Tronix for creating precisely measured cutting layers. Gripper transport system POLAR Autoturn – Clamp transport for rear table loading and turning gripper takes the prepared cutting layer from the stack rack or buffer table. Via air tables, whose air cushion optimizes material flow, the material is directly conveyed to the rear table of the high-speed cutter and deposited precisely there. The gripping system holds the cutting layer firmly during transport, ensuring layers stay perfectly aligned even when pre-aligned. Cutting machine Polar 137 XT-AT with touch operation and Autotrim function for automatic waste removal under the front table during cutting. - Lowerable left side gauge (required for rear table loading), also enabling formats with a diagonal of...

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 4 kW (5,44 AG), kuro tipas: elektrinis, spalva: sidabras, bendras svoris: 2 460 kg, stiebo tipas: teleskopinis, Gamybos metai: 2022, veikimo valandos: 21 h, mašinos/transporto priemonės numeris: 0943, Small, compact, and maneuverable: these sum up the advantages of our 2.5-ton electric mobile crane. There's no doubt it still moves "big things," as the crane delivers full performance with a maximum lifting capacity of 2,500 kilograms. The 2.5-ton electric mobile crane is equipped as standard with non-marking tires that do not leave chalk residue. The crane’s 2 kW electric motor offers precise control and, thanks to a powerful 24 V, 420 Ah battery, operates for 8 hours without needing a recharge. The telescopic boom extends proportionally and can be optionally lengthened with a boom tip. JMG MC 25S - Lifting capacity: 2,500 kg - Net weight: 2,460 kg - Width: 900 mm - Height: 1,600 mm - Drive: Electric - Power: 4 kW - Tires: Solideal Magnum - Hydraulic winch Hjdpfx Afow S Ii Ne Iong - Telescopic boom - Counterweights - Battery: 24 V 420 Ah - Automatic braking system - Front-wheel drive – 2 gears - Radio remote control - Manual boom extension - Electronic load monitoring - Boom angle: +60° / -15° - Ground clearance: 70 mm - Front tires: 18 x 7-8 - Rear tires: 15 x 4.5-8 - Operating manual - Electric motors – insulation class H

Sąlyga: naudotas, Gamybos metai: 1977, Cutting diameter: 250 mm Saw blade length: 450 mm Cutting speed: 50/70/100/135 strokes/min Dimensions (LxWxH): 2.6 x 1.8 x 1.1 m Total power requirement: 3.8 kW Machine weight approx.: 1.2 t - fully automatic band saw machine Hedpfx Aocxxw Ujf Ijng

Sąlyga: naudotas, The Horizon APC-T61 is a high-performance hydraulic guillotine cutter designed for precision cuts, making it ideal for small and medium-sized print shops and bookbinderies. The machine is as-new, fully operational, and ready for immediate use. Key features of the APC-T61 include the ability to store programs, an electronic digital display with 0.1 mm accuracy, and simple program activation via a start button. The knife bar and hydraulic clamping drive ensure precise and efficient cutting. The technical specifications of the APC-T61 are as follows: Cutting length: 610 mm Table depth: 620 mm Cutting height: 100 mm Hsdpfx Aow Irlgsf Iong Power supply: 380 V / 50 Hz Power: 3 kW Weight: 700 kg The machine comes with a comprehensive accessory kit including spare blades, shaft, operating tools, tapping block, and manual. The hydraulic guillotine Horizon APC-T61 is currently in stock and located in Germany. It is a reliable and efficient solution for your cutting requirements. Format: 610 mm Equipment: Horizon APC-T61 hydraulic guillotine cutter. The machine is as-new and fully functional, a powerful, precise hydraulic cutting plotter suitable for small and medium operations. Controls: Program storage capability, electronic digital display with 0.1 mm accuracy, program start via the "Start" button, knife bar, and hydraulic clamping drive. Technical data: Cutting length 610 mm, table depth 620 mm, cutting height 100 mm, power supply 380 V / 50 Hz, power 3 kW, weight 700 kg. The set includes: spare blades, shaft, operating tools, tapping block.

Sąlyga: naudotas, Gamybos metai: 1994, Cutting diameter: 520 mm Saw blade length: 7239 mm Cutting width: 1.3 mm Control: POSIMOD Cutting area (square): 520 x 520 mm Feed length: 500 mm Hjdpfx Afjwm Rm Is Ieng Multiple feed length: 4500 mm Minimum cut-off length: 6 mm Residual piece length min./max.: 10 / 100 mm Cutting speed: 20 - 130 m/min Saw blade dimensions: 7239 x 50 x 1.3 mm Saw motor: 5.5 kW Total power requirement: 10.0 kW Machine weight approx.: 3.8 t Machine dimensions (L x W x H): 3.42 x 2.30 x 2.40 m - 2-column guided - Accessories: Infeed roller conveyor, 2500 mm long, chip conveyor, coolant system

Sąlyga: naudotas, rida: 84 287 km, galia: 368 kW (500,34 AG), pirmoji registracija: 12/2019, kuro tipas: dyzelinas, bendras svoris: 28 000 kg, ašių konfigūracija: 3 ašys, spalva: sidabras, pavaros tipas: automatinis, emisijos klasė: Euro 6, krovimo vietos ilgis: 5 100 mm, krovinių skyriaus plotis: 2 500 mm, krovos erdvės aukštis: 800 mm, Įranga: ABS, autonominis šildytuvas, elektroninė stabilumo programa (ESP), kranas, navigacijos sistema, oro kondicionavimas, suodžių filtras,

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1, bendras svoris: 4 kg, Vamzdžių lietaus nuvedimui gamybos linija Juostos storis: 0,6 - 0,7 mm Medžiagos kokybė: Plienas ir iš anksto dažytas Hnjdpfx Aewvhnhef Iog Produkto diametras: Ø 100 mm (pasirinktinai: 75, 87, 111, 120 mm) Gamybos liniją sudaro: Dviguba galvutė išvyniotuvė: 4+4 tonos, Ritininio formavimo mašina kasetiniu tipu (su papildomomis kasetėmis) Hidraulinis pjaustymo įrenginys.

Sąlyga: naudotas, rida: 683 907 km, galia: 353 kW (479,95 AG), pirmoji registracija: 06/2010, kuro tipas: dyzelinas, bendras svoris: 26 000 kg, ašių konfigūracija: 3 ašys, kita apžiūra (TÜV): 01/2026, stabdžiai: retarderis, spalva: balta, pavaros tipas: mechaninis, emisijos klasė: Euro 5, krovimo vietos ilgis: 6 600 mm, Įranga: kranas, oro kondicionavimas,

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 20 kW (27,19 AG), pavaros tipas: hidrostatinis, kuro tipas: elektrinis, spalva: mėlyna, bendras svoris: 13 700 kg, tuščias svoris: 13 700 kg, darbinė masė: 13 700 kg, kėlimo galia: 11 000 kg/m, kėlimo aukštis: 10 000 mm, padangos dydis: Voor 315×70-15 | Achter 250×70-15, padang padangų: 90 procentas, ašių konfigūracija: 4x2, sėdimų vietų skaičius: 1, pirmoji registracija: 02/2014, stiebo tipas: teleskopinis, Gamybos metai: 2014, veikimo valandos: 286 h, Įranga: UVV saugos patikra, borto kompiuteris, galvos apsauga, hidraulika, kabina, kranas, reguliuojamas strėlė, žemas triukšmo lygis, === MAIN SPECIFICATIONS === Year of manufacture: 2014 Operating hours: 286 h Max. lifting capacity: 11,000 kg Total weight: 13,700 kg Power: 2 × 10 kW (80V electric motors) Drive type: Electric (battery 80V – 830Ah) Transmission: Front axle with gear reduction Steering: Rear-wheel steering, hydraulic with load-sensing system Telescopic boom: Hydraulically extendable (2 sections) Hnodpfx Aexn Sm Ajf Iog Max. boom angle upwards: +60° Max. boom angle downwards: −10° Drive system: Electric with electronic speed control (MOSFET type) Tyres: Front: 4 × 315×70-15 | Rear: 2 × 250×70-15 (non-marking) Brakes: Hydraulic service brake, automatic parking brake Hydraulic system: Gear pump, max. pressure 22 MPa CE certification: Yes (2006/42/CE – 2004/108/CE) Country of origin: Italy === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and complete documentation included Immediately operational and ready for transport Fully electric drive – zero emissions Hydraulic telescopic boom with two extensions Non-marking tyres, ideal for indoor use Includes hydraulic winch, enclosed cab, and work lighting === CONDITION === Very good condition – only 286 operating hours. Crane fully inspected and ready for use. Available from stock. === LOCATION & DELIVERY === Location: Sittard, Netherlands. Worldwide delivery possible. Price €89,999 (EXW / plus VAT). The JMG MC 110 is a powerful electric industrial crane with a lifting capacity of 11 tonnes and a robust telescopic boom. Thanks to its electric drive, compact design, and non-marking tyres, it is ideal for use in production halls, warehouses, and maintenance environments. The MC 110 combines precision, safety, and zero emissions – the perfect solution for indoor applications. === DELIVERY === Crane loading available on request for smooth transport. Flexible delivery options tailored to your destination and logistical requirements. All transports are professionally handled by the Collé Rental & Sales logistics team.