Maisto cisterna

Magyar Food tank trailer

Sąlyga: naudotas, Gamybos metai: 2000, CNC lankstymo presas Gamintojas: Trumpf Tipas: Truma Bend V170 Ledpfsx Di Hxsx Abrshc Gamybos metai: 2000 CNC valdymas: Delem Spaudimo galia: 170 t Darbinis plotis: 4 m Bombiravimas Galinė atrama 6 ašys Hidraulinis įrankių tvirtinimas Aukštis: 2,9 m be įrankių ä18226

Sąlyga: naudotas, 2-Station Notching and Press Brake Machine EUROMAC Type Multi 220/6R Press Brake, Sheet Metal Bending Machine, Notching Machine Serial No. M11941298 Year of manufacture: 1998 Cutting capacity: 6 mm steel at 45 kg/mm² 4 mm stainless steel Station I (Notching) Notching angle: 60° to 140° (with special blade from 30° to 140°) Blade length: 220 mm Lhsdpfx Abomck Ryerjc Table size: 950 x 640 mm - Manual angle adjustment via handwheels - Notching angle with installed blade set from 60° to 140° - Hydraulic clamping of upper and lower blades - Automatic blade clearance adjustment - Sheet metal hold-down device - Flush-mounted graduated measuring tapes in the table - Stop rails with angle adjustment - Pedal operation Station II (Press Brake Unit) Press force: 18 tons Table size: 950 x 340 mm Working height: 1100 mm - Infinitely variable stroke speed - Continuously adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible die with 4x 90° grooves, length = 415 mm - Top tool 90°, length = 415 mm Motor power: 4 kW Power supply: 400 Volt, 50 Hz Space requirement (L x W x H): 1150 x 1050 x 1460 mm Weight: approx. 1000 kg Good condition

Sąlyga: naudotas, Gamybos metai: 1993, Pressure: 250 t Stroke: 500 mm Column spacing: 1650 mm Side frame opening: 750 mm Installation height – stroke upper position: 1200 mm Table size: 1650 x 1250 mm Drawing cushion force in table: 80 t Drawing cushion stroke in table: 250 mm Drawing cushion area in table: 1070 x 780 mm Table height above floor: 850 mm Ram area: 1650 x 1250 mm Downward speed: from 10 mm/s Return speed: 80 mm/s Working speed: 10 mm/s Lodpfjv Svb Aox Abrehc Oil capacity: 400 l Drive power: 22.0 kW Weight: 21.5 t Space requirements (W x D x H): 2.7 x 2.3 x 4.25 m Height above floor: 4.0 mm Approved for hand loading operations according to German accident prevention regulations (UVV) - with oil-hydraulic drive, pressure- and stroke-dependent control, hydraulic drawing cushion in table, hydraulic cut shock absorption (4x parallel-keeping cylinders), hydraulic-mechanical depth stop, two-hand control, manual lever control

Sąlyga: naudotas, Gamybos metai: 1970, Skaitmeninis ekranas: taip Svoris: 4,4 t Lhodpfx Aoyacnpjbrsc Greitasis eiga: taip, m/min

Sąlyga: naujas, Gamybos metai: 2025, Sheet thickness - max. 8 mm Pressure 200 t Bending length 3200 mm Lhjdpfx Aboxf Na Uorsc Motor power 15 kW Return speed 105 mm/min Working speed 9 mm/sec X travel 600 mm Max. opening height 570 mm Control system: DELEM DA53T GERD WOLFF KANTO 200T CNC electro-hydraulic press brake CNC axis accuracy 1) Machine ram (Y1, Y2) – Synchronization precision: The ram motion axes control the bending depth and bending angle. The system consists of the control unit, two glass scales (Y1, Y2) installed on the worktable, electro-hydraulic proportional valves, and an amplifier. A closed-loop control system captures and regulates the relative position of the ram and table as well as the speed and position of the ram. This ensures synchronization of the ram, maintaining high precision for depth and angle. Positioning accuracy: ±0.02 mm Repeatability: ±0.02 mm 2) Machine backgauge (X axis): The forward/backward movement of the X axis controls the measurement for sheet blank sizing. The backgauge bar is driven by a servomotor and moves the traverse via ball screw and linear guide. Operation is stable and precise. Positioning accuracy: ±0.10 mm Repeatability: ±0.03 mm 3) Mechanical crowning system (V axis): The draw plate of the mechanical compensation is motor-driven so that the compensation points are formed in an arc. These points perfectly compensate for the elastic deformation of the worktable and ram to ensure consistent angles and straightness of the workpiece. Position sensors and CNC control provide precise regulation.

Sąlyga: geras (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 160 mm, veleno skylė: 36 mm, tekėjimo skersmuo: 300 mm, centro aukštis: 150 mm, plotis centre: 500 mm, bendras ilgis: 1 500 mm, bendras plotis: 800 mm, bendras aukštis: 1 300 mm, veleno greitis (maks.): 3 550 aps./min, veleno greitis (min.): 15 aps./min, bendras svoris: 1 000 kg, Konvencinė precizinė tekinimo staklės su įvoriniu įtaisu, centrų aukštis 150 mm, atstumas tarp centrų 500 mm, pragręžimo skersmuo Ø 36 mm, 18 sukimosi greičių 15–3550 aps./min., variklis 3 kW. Įranga: aušinimo skysčio sistema, įvorinis įtaisas, trijų žnyplių griebtuvas, grąžtų griebtuvas, tekinimo centras, greito keitimo RAPID peilių laikiklis su 5 įdėklais, staklių lempa, išilginis atmušas. Išmatavimai 150x80x130 cm, svoris apie 1000 kg. Lhsdex Urmlspfx Abrec

Sąlyga: naudotas, Gamybos metai: 1996, Pressure: 130 t Distance between uprights: 1220/1070 mm Stroke: 22 - 96 mm Strokes per minute: 20 - 120 spm Installation height (stroke + upper ram adjustment): 518 mm Lateral opening between uprights: 600 mm Table area: 1220 x 880 mm Through-hole in table: 450 x 250 mm Lhodpjvuubyofx Abrsc Table height above floor: 950 mm Ram area: 1180 x 800 mm Drive power: 22.0 kW Machine weight: approx. 17.50 t Space requirements: approx. 3.7 x 1.75 x 3.55 m Ram adjustment: 110 mm Approved for automatic operation in accordance with German accident prevention regulations (UVV) Equipped with infinitely variable drive control, hydraulic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram weight compensation, motorized ram adjustment, automatic stroke adjustment, 8-fold roller guide, electronic roller feed with hydraulic intermediate ventilation (Hensel, EVX 500)

Sąlyga: naudotas, Gamybos metai: 1982, Press force 150 t Throat depth 520 mm Stroke 30 - 200 mm Strokes per minute 15 - 60 Distance table/ram, large stroke up, adjustment up 650 mm Table size 1600 x 1000 mm Lhedevuudbjpfx Abrec Pass-through opening in table 1040 x 140 mm Table height above floor 1000 mm Clearance between frame walls 1000 mm Ram area 1400 x 800 mm Ram adjustment 120 mm Drive power 20.0 kW Weight 27.5 t Required floor space (W x D x H) 2.3 x 2.75 x 4.5 m Approved only for safe tooling or fixed guarding according to German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (make Ortlinghaus), hydraulic overload protection in the ram, pneumatic ram weight compensation, semi-automatic ram adjustment Can be offered either without commissioning, or alternatively with new Siemens S7-1500 F control system

Sąlyga: naudotas, Gamybos metai: 1978, Pressure 150 t Fixed stroke 80 mm Stroke rate 30 - 150 /min Upright gap width 930 mm Shut height (stroke + ram adjustment at top) 400 mm Side frame opening 650 mm Table area 880x1300 / 1500x600 mm Lhjdpfevut Urox Abroc Pass-through opening in table 760 x 180 mm Table height above floor 1270 mm Ram area 920x1000 / 1300x600 mm Weight 27.5 t Space requirements approx. 3.1 x 1.8 x 4.3 m Approved for automatic operation according to German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination, fixed stroke, motorized ram adjustment, pneumatic ram counterbalance, central lubrication WITHOUT feed as is, without commissioning Price for commissioning (with new control system) on request

Sąlyga: geras (naudotas), Gamybos metai: 2020, Įranga: apsaugos šviesos užtvara, CNC ESA, 3 ašys Y1 Y2 X ir rankinė R, rankinis stalo siurblys, DSP LASER stalas su suspaudimo lankstymu, 2020 metai. Lhodpeyanl Hjfx Abrsc