PUSIAU BYLOJE VIRIMO APARATAS

MAGRAF MAGRAF KO-50x70 PLUS

Būklė: naudotas, Gamybos metai: 1997, mašinos/transporto priemonės numeris: 97989, Folding Knife Unit - Mobile Folding Knife Stahl VFZ 52.D Four-directional folding unit - Four-plate folding unit Year 1997 - Serial No. 97989/97-255056 Sheet size min. 120 x 100 mm - max. 520 x 360 mm Max. speed 160 m/min Max. cycle rate 30,000 cycles/hour Feed height 515 - 915 mm Online video inspection via Skype video We would be very pleased to welcome you for a visit – more machines in stock Itedjll A Tispfx Agfed Available immediately – Can be inspected In Stock Emskirchen / Nuremberg – Can be tested

Būklė: naudotas, Gamybos metai: 1981, mašinos/transporto priemonės numeris: 9, Case Press and Joint-Setting Machine Schmedt PräForm HHS 20 Year of manufacture: 02/1981 - Serial No. 09 Book height: 100 - 520 mm Block width: 120 - 400 mm Block thickness: 8 - 100 mm Itedpfx Agormul Dsfed Output: approx. 150 units/hour Air supply: 6 bar Electrical connection: 230V / 50Hz / 2.0kW Online video inspection possible via Skype-Video We would be pleased to welcome you on-site – more machines in stock Immediately available – Can be inspected Stock location: Emskirchen / Nuremberg – Testing possible

Būklė: geras (naudotas), rida: 11 625 km, kuro tipas: benzinas, spalva: žalia, vairuotojo kabina: dieninė kabina, Gamybos metai: 1957, Paskirtis: Krovinių transportavimas Vairo padėtis: Kairėje Savosios masės svoris: 3 740 kg Techninė būklė: gera Optinė būklė: gera Gamybos šalis: NL Norėdami gauti daugiau informacijos, susisiekite su Vink Machinery. DAF YA126 sužeistųjų transportavimui * 1957 m. * Benzinas * 11 625 kilometrai * Įrengtas šildytuvas priekyje ir gale * Su papildomais atributais * Savosios masės svoris 3 740 kg Iodpfxjtpm Hys Agfetd * Įskaitant sunkvežimio registracijos pažymėjimą * Priekabos registracijos dokumentų nėra * MARGE!

Būklė: naujas, DESCRIPTION DM100 Z2C – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products by means of a contact roller (approx. 55° Shore) with an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two counter-rotating cross belts from both below and above. The cross belts round the edges of the workpieces on both inner and outer sides. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data - DM1100 Z2C: Isdpfxjd Ixadj Agfotd Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction port per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Gamybos metai: 1998, būklė: paruoštas naudoti (naudotas), Stahl saddle stitcher ST 100.1, year of manufacture 1998 1,223 operating hours. Manual feeder (expandable to 2) 4 twin feeders Stitching unit with side gauge control 2 Hohner 52/8 standard stitching heads 2 Hohner 52/8 loop stitching heads Side gauge control Three-knife trimmer with center trimming device Transfer marking table Itjdpfxoq Rw Exs Agfjd Shingle delivery 2 pumps Documentation

Būklė: naudotas, Gamybos metai: 1988, mašinos/transporto priemonės numeris: 1743, UV-coating machine Billhöfer Gula Speed CGS JKN 112, year 1988 – serial no. 1743 Minimum format: 300 x 500 mm Maximum format: 820 x 1120 mm Automatic Mabeg feeder Paper weight: 60 up to 500 g/m² cardboard Online video inspection via Skype possible We would be very pleased to welcome you for an on-site visit – more machines available from stock. Available immediately – machine can be inspected Ijdpfx Ageh Axquefetd Located in Emskirchen / Nuremberg – testing on site possible

Gamybos metai: 2002, būklė: geras (naudotas),

Būklė: naujas, Gamybos metai: 2026, Sheet metal working machines of the RED series are the hallmark of Prod Masz. Every RED bending machine features a narrow bending beam which, regardless of its length, enables bending on three sides thanks to lateral cutouts, with two handles on each side. An additional advantage is the increased internal space for folding operations. Professional Bending Machine RED PLUS with Foot Pedal Technical Specifications: - Maximum working length: 3200 mm - Bending capacity: 0.8 mm (steel) - 1.2 mm (aluminum, copper, zinc) - Bending beam thickness: 15 mm - Maximum bending angle: 160 degrees Itedpfxscrcgqj Agfod - Upper beam opening: 80 mm - Weight: approx. 700 kg - Roller shear available for an additional 350 EUR - Price includes front depth stops and rear frame - 3-sided bending possible → side cutouts - Cutout size: 60mm/45° Scribing template FREE :) Price: 6,600.00 EUR Delivery costs: 360.00 EUR Delivery schedule: weekly Payment: cash on delivery or advance payment We look forward to your inquiry! Invoices are issued either with 0% VAT for intra-community delivery or plus 19% VAT.

Būklė: naudotas, Gamybos metai: 2006, Year of manufacture: 2006 Condition: operational Configuration: Itjdeww Ey Dopfx Agfod - air tables - side tables - safety light barriers Specification: - width: 92

Gamybos metai: 1997, būklė: geras (naudotas),