Komercinė transporto priemonė

XK 150 Limousine / Swiss-Vehicle

Būklė: naujas, Cutting capacity at 90 degrees: round 125 mm Cutting capacity at 90 degrees: square 125 mm Cutting capacity at 90 degrees: rectangular 127 x 125 mm Saw blade dimensions: 1435 x 12.7 x 0.65 mm Blade speed: 38 - 80 m/min Total power requirement: 0.95 kW Machine weight: approx. 18 kg Dimensions (L x W x H): 720 x 380 x 450 mm Both straight and mitre cuts can be performed at angles between 45 and 90 degrees. Podpfeupw R Nsx Adzsgl With this metal band saw, you work not only precisely but also quickly: The blade speed is adjustable between 38 and 80 metres per minute. With a weight of just 25 kilograms, the saw is easily portable.

Būklė: geras (naudotas), Throughfeed line for door leaf processing, high-performance machine capable of processing a single door leaf (lock case, handle, and hinges) in approximately 30 seconds. The machine consists of two units, each equipped with left and right sections that perform specific operations. In the first unit, the left section mills the faceplate for the lock and drills for the handle and key, while the right section simultaneously drills for hinges. In the second unit, the left section creates and deepens the lock case pocket, while the right section simultaneously screws in the hinges. Pgjdpfx Ajuq Scpodzjl

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, galia: 367,75 kW (500,00 AG), kuro tipas: dyzelinas, kuras: dyzelinas, stabdžiai: retarderis, spalva: balta, pavaros tipas: automatinis, Įranga: ABS, oro pagalvė,

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, įėjimo dažnis: 50 Hz, Brand: Pramac GBW 22 P DDS Soundproof Canopy: 66 dB(A) @ 7m Continuous Output 3-phase: 20.12 kVA / 16.10 kW Max. Output 3-phase: 22 kVA / 17.6 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Phases: 3 Diesel Engine: Perkins 404J-22G Emission Stage: STAGE V Cooling System: Water-cooled Cylinders: 4 in line Displacement: 2220 cm³ Aspiration: Naturally aspirated Speed: 1500 rpm Engine Control: Mechanical Fuel Consumption at 3/4 Load: 4.0 liters/h Pedpfx Asq A T Dwjdzogl Fuel Consumption at Full Load: 5.74 liters/h Fuel Tank Capacity: 51 liters Generator: MeccAlte ECP28-M4 C Type: Brushless Number of Poles: 4 Regulation: Electronic (AVR control) Digital Control: ACP Sockets with RCD (Residual Current Device): 1x 32A - 400V / 5-pin Dimensions and Weight: Length: 1,645 mm Width: 870 mm Height: 1,060 mm Tank Volume: 51 liters Weight, dry: approx. 546 kg Central lifting eye for crane Forklift pockets Glow plugs Engine pre-heating (PHS) Battery trickle charger

Būklė: naudotas, rida: 4 295 km, pirmoji registracija: 07/1998, kuro tipas: dyzelinas, spalva: geltonas, pavaros tipas: mechaninis, pakaba: kitas, veikimo valandos: 4 295 h, Įranga: visų varančiųjų ratų pavara,

Būklė: naujas, Cutting diameter: 170 mm Pjdpfx Ajg Trvrodzogl Saw band dimensions: 2080 x 20 x 0.9 mm Table height: 880 mm Cutting speed: 40 + 80 m/min Cutting capacity at 90° round: 170 mm Cutting capacity at 45° round: 125 mm Cutting area at 90°: rectangular 150 x 190 mm Cutting area at 45°: rectangular 95 x 120 mm Total power requirement: 1.1 kW Machine weight approx.: 0.24 t Dimensions (LxWxH): 870 x 1,550 x 1,740 mm This metal band saw is supplied with a fully enclosed worm gear drive. It is also equipped with a hydraulic pressure control and a base frame that can be swivelled by 45 degrees. Additional features include an emergency stop, a complete cooling system, the original factory base, automatic shut-off, and a quick-release clamping device.

Būklė: geras (naudotas), Grindų aukštis: 290 mm Atstumas tarp smailių: 3000 mm Pasukimo skersmuo virš lovos: 580 mm Pasukimo skersmuo virš skersinio stalo: apie 400 mm Veleno anga: 63 mm Veleno tvirtinimas DIN 55027: dydis 8 Apsisukimų diapazonas: 25 - 1120 aps./min. Lovo plotis: 365 mm Išilginė pastūma: 0,03 – 1,3 mm/aps. Tas pats, plokštuminė pastūma: 0,008 - 0,33 mm/aps. 80 metriniai sriegiai: 0,25 - 76 mm 96 Whitworth sriegiai: ½ “ – 152 gijų/colyje 52 moduliniai sriegiai: 0,25 - 22 moduliai 88 diametral pitch sriegiai: 1 - 176 pitch Galvutės tvirtinimas: MK 4 Variklio galia: 5,5 kW Matmenys (ilgis x plotis x aukštis): 4450 x 1300 x 1350 mm Svoris: 2800 kg Priedai / Ypatybės: • Greitai keičiama plieno laikiklio sistema „Multifix“ dydis B • Grūdintos lovos kreipiančiosios • Lovo sustojimas Psdextu Erspfx Adzogl Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Būklė: naudotas, Swing diameter over bed: 480 mm Swing diameter over cross slide: 300 mm Turning length: 1500 mm Pgedpfstqqx Asx Adzel Centre height: 240 mm Centre distance: 1500 mm Spindle bore: 42 mm Spindle speeds: 14 - 1400 rpm Total power requirement: kW Machine weight approx.: 2.4 t Machine dimensions (L x W x H): 3.00 x 1.05 x 1.40 m Accessories: 3-jaw chuck 250 mmØ, MULTIFIX tool post, live centre

Būklė: naudotas, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle arrangement: - Bottom 5.5 kW - Right + Left 11 kW - Top 7.5 kW - Universal 5.5 kW Each spindle with individual motor Number of steel feed top rollers: 5 Number of rubber feed top rollers: 3 1 rubber roller in the table Pgodpfomiik Tsx Adzjl Extraction port diameter: 150 mm Stepless feed speed adjustment: 4–24 m/min Feed via cardan shafts Table lubrication pump Pressure: 6 atm Electric body lifting Power supply: 400 V Overall dimensions: Length: 4240 mm Width: 1550 mm Height: 1560 mm

Būklė: naujas, Dimensions (L x W x H): 780 x 480 x 1050 mm Weight: 79.5 kg Number of drawers: 6 pcs. The tool trolley is equipped with 6 storage drawers. The tool trolley is fitted with 2 fixed and 2 swivel castors, one of which has a brake. The tool trolley is fully lockable thanks to an integrated lock. Each drawer can be individually locked. All drawers are equipped with quick-release catches and damping. Pedpfxeu Imk Re Adzogl Height-adjustable storage compartment behind the door. Central locking system with 2 keys. The tool trolley is equipped with 155 pcs. of tool parts: 3 socket sets: 1/4", 3/8", 1/2". Ratchet ring spanner set from 6 to 22 mm, Socket set extensions, various Allen keys from 1 to 10 mm, Various screwdriver sets. Assorted pliers.