Hohner 43/6-S siuvimo galvos NAUJOS

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, veikimo valandos: 1 437 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 137949-100, spaudimo jėga: 2 100 kN, varžto skersmuo: 65 mm, darbinio tūrio: 913 cm³, įpurškimo slėgis: 1 600 juosta, bendras svoris: 10 500 kg, valdiklio modelis: UNILOG B8, The machine was serviced and upgraded to the latest state by the manufacturer in 2021! It has not been used since and is therefore in excellent condition! The machine is offered including 2 Kistler modules for cavity pressure control! Lhsdpfsyi Ailox Abroc TECHNICAL DETAILS Plastic type: Thermoset Clamping force: 2,100 kN Screw diameter: 65 mm Screw stroke: 275 mm Screw L/D ratio: 22 Max. screw speed: 278 rpm Screw torque: 1,920 Nm Tie bar clearance (H x V): 670 x 620 mm Mold installation height: 350 mm Platen distance: 1,100 mm Opening stroke: 750 mm Ejector stroke: 200 mm Ejector force: 65 kN Theoretical shot volume: 913 cm³ Specific injection pressure: 1,600 bar Max. plasticizing rate: 62 g/s Nozzle stroke/nozzle force: 400 mm / 100 kN Free injection volume flow: 419 cm³/s Barrel heating capacity: 27 kW Number of heating zones incl. nozzle: 5 MACHINE DETAILS Control type: UNILOG B8 Hydraulics Hydraulic oil tank capacity: 600 liters Oil temperature min/max (HLP 32): 30 °C / 40 °C Oil temperature min/max (HLP 46): 40 °C / 50 °C Oil cooling activation temperature (HLP 32): 35 °C Oil cooling activation temperature (HLP 46): 45 °C Electrics Drive power hydraulic pump: 37 kW Max. barrel temperature: 350 °C Cooling water system Cooling water consumption: approx. 0.5 - 1.5 m³/h Max. cooling water inlet temp.: 35 °C Cooling water return: max. 10 bar Ambient temperature: °C Noise level: 65 dB(A) Weight: 10,500 kg Operating hours: 1,437 h EQUIPMENT Kistler module for cavity pressure control, range 1: 20,000 pC Kistler module for cavity pressure control, range 2: 10,000 pC

Sąlyga: naudotas, CNC Oxy-Fuel Cutting System BACH Type ACW 2500 Oxy-Fuel Cutting Machine with CNC Controller NBS 400 Machine No. 14 561-06 Year of Manufacture: 2006 Cutting Area: 2500 x 6500 mm Track Length: 8000 mm Track Gauge: 3345 mm Track Height: 650 mm 2x Machine Cutting Torches with Burn Table Lodjf Ncadjpfx Abrjhc

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: H2X396F51535, Gamybos metai: 2015, veikimo valandos: 6 533 h, keliamoji galia: 8 000 kg, kėlimo aukštis: 3 500 mm, stiebo tipas: dupleksas, galia: 72 kW (97,89 AG), tuščias svoris: 16 230 kg, TECHNINĖS DETALĖS Keliamoji galia: 8 000 kg Kėlimo aukštis: 3 500 mm ĮRENGINIO DETALĖS Stiebo tipas: Duplex Galia: 72 kW Grynoji masė: 16 230 kg Matmenys: 380x230x325 cm (A) Lhodpsyifkpsfx Abroc Darbo valandos: 6 533 h ĮRANGA Pilnavidurės gumos padangos

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2000, mašinos/transporto priemonės numeris: 0-201-22-3325, Funkcionalumas: visiškai funkcionalus, ruošinio ilgis (maks.): 5 800 mm, ruošinio plotis (maks.): 1 200 mm, valdiklio modelis: Homatic-CNC System PC83 mit Windows NT 4.0, X ašies padavimo greitis: 80 m/min, veleno greitis (maks.): 18 000 aps./min, No reserve price – guaranteed sale to the highest bidder! Bidding requires timely collection of the machine on 20.03.2026! 4-axis CNC machining centre for drilling, milling, edge banding and finishing: - Saw and cross-cutting unit for tool changer - Drilling and milling unit (4 spindles) for tool changer - Combined flush-milling and finishing unit for tool changer - Air nozzle for workpiece edge for tool changer Attention: Only the above-mentioned units are included in the scope of delivery. No vacuum cups, tools, or tool holders (which may be shown in the photos) are included! TECHNICAL DETAILS Console clamping table "K": 12 adjustable consoles for holding vacuum cups with longitudinal and side stops, 4-fold allocation possible - Max. workpiece length (single setup): 5,800 mm - Max. workpiece length (pendulum mode): 2,200 mm - Max. workpiece width: 1,200 mm - Max. workpiece thickness (using standard 100 mm vacuum cups) with edging: 60 mm (when extraction hood is in position 1) - Max. workpiece thickness (using standard 100 mm vacuum cups) without edging: 60 mm - Max. workpiece thickness (using standard 100 mm vacuum cups) without edging: 120 mm (when extraction hood is in position 2) Support Equipment: - Drilling head: 17 vertical spindles Ljdpoyic Tusfx Abrohc - 2x main spindle, 12 kW, water-cooled for HSK (speed 18,000 rpm, with C-axis and 12-position disc-type tool changer) - Separate Y-axis for the second main spindle, as well as an aggregate interface with integrated pneumatic/electrical supply and swing drive - C-axis, unlimited swivel range Edgebanding unit, 360° butt-jointed, for insertion into the main spindle (right side) - Max. edge height: 65 mm - Pickup position (right) for depositing edgebander module - Pre-cutting station and 3-position roller magazine Adapter units: - Combined flush/radius milling and finishing unit (profile scraper) - Saw cross-cutting unit - 4-spindle drilling/facing unit (cross head) - Air nozzle for workpiece edge MACHINE DETAILS Control: HOMATIC control PC 83 with Windows operation (NT 4.0) EQUIPMENT - WOODWOP programming system version 5.0 - Network connection - Laser positioning aid - Chip conveyor belt - Safety: foot mats at the front, side protection grilles; rear: wall-mounting Note: A loading aid can be provided against a deposit of €5,000. Upon return, the deposit will be refunded minus 10%.

Sąlyga: naudotas, Gamybos metai: 2014, Biesse Rover B G 2231 FT komplett mit Be- und Entladesystem Beschreibung: Arbeitsbereich X in Y: 3100 x 2205 mm Flachtisch Anzahl der Achsen Fräsmotor: 3 Keine Bohraggregat Werkzeugaufnahme: HSK 63 Wechsler: Fest mit 21 Plätzen Lhedpsw Hf A Rsfx Abroc Vakuumpumpen: 2 x 300 m³ Schutzzäune Office-Softwarelizenz Ein- und Auslauftisch (für Vakuumheber geeignet) Abschiebearm Einlauflineal B-Solid Presetter Detaillierte Beschreibung auf Anfrage (Trotz größter Sorgfalt sind alle Änderungen, Irrtümer in den technischen Daten, Preisen und sonstigen Angaben vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf.) Preise exkl. Inserierungskosten MaschinenSucher Die besten Holzbearbeitungsmaschinen aus den Niederlanden Die beste gebrauchte Maschinen aus den Niederlanden

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2019, veikimo valandos: 7 866 h, keliamoji galia: 2 000 kg, kėlimo aukštis: 130 mm, šakių ilgis: 1 000 mm, bendras svoris: 866 kg, TECHNICAL DETAILS Load capacity: 2,000 kg Load centre distance: 600 mm Load distance: 1,023 mm Lift height: 130 mm Fork internal dimension: 55 / 172 / 190 mm Fork outside width: 560 mm Fork length: 1,000 mm MACHINE DETAILS Tyres: Polyurethane + Drive wheel size: 230 x 75 mm Load wheel size: 2 x 85 x 80 mm Support rollers (drive side): 140 x 54 mm Track width (drive side): 495 mm Track width (load side): 388 mm Travel speed with load: 7.5 km/h Travel speed without load: 9.0 km/h Lifting speed with load: 1.4 m/s Lifting speed without load: 1.4 m/s Lowering speed with load: 0.9 m/s Lowering speed without load: 1.2 m/s Gradeability with load: 10 % Gradeability without load: 20 % Acceleration time over 10 m with load: 6.9 s Acceleration time over 10 m without load: 5.4 s Service brake: electromagnetic Dimensions & Weight Dimensions (L x W x H): 2,333 x 720 x 1,305 mm Weight: 866 kg Battery voltage: 24 V Nominal capacity: 240 / 360 Ah Battery weight ± 5 %: 220 / 290 kg Operating hours: approx. 7,866 h Ledpfxjyiancj Abrshc EQUIPMENT Integrated charger Display with charge status and operating hours

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 91656748, Gamybos metai: 2021, veikimo valandos: 2 364 h, keliamoji galia: 3 000 kg, bendras svoris: 560 kg, bendras ilgis: 1 275 mm, bendras plotis: 600 mm, TECHNINĖ INFORMACIJA Priekabos apkrova: 3.000 kg Nominali tempimo jėga: 600 N Ratų bazė: 930 mm Ašies apkrova be krovinio priekyje: 330 kg Ašies apkrova be krovinio gale: 230 kg MAŠINOS DUOMENYS Matmenys ir svoris Sankabos aukštis: 158 mm Matmenys (I x P): 1.275 x 600 mm Sankabos aukštis: 158 mm Svoris: 560 kg Klirensas ties ratų baze: 50 mm Ljdpfx Aeyiafzjbrehc Posūkio spindulys: 1.080 mm Variklis / Akumuliatorius Važiavimo variklio galia S2 60 min.: 2,8 kW Akumuliatoriaus įtampa: 24 V Nominali talpa: 250 Ah Akumuliatoriaus svoris: 220 kg Važiavimo greitis su kroviniu: 9 km/h Važiavimo greitis be krovinio: 10,5 km/h Tempiamoji galia su kroviniu: 600 N Tempiamoji galia be krovinio: 600 N Didžiausia tempiamoji galia: 2.000 N Stabdys: elektromagnetinis Darbo valandos: apie 2.364 h ĮRANGA Įkroviklis

Gamybos metai: 2024, Sąlyga: naujas, oris- Extruder MINI ESE 20/25 D Technical Data Screw Diameter [mm]: 20 Screw Length [L/D]: 25 Screw Speed [rpm]: 20-200 rpm Screw Axial Pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency converter Drive Power [kW]: max. 2.5 Reduction Gearbox with integrated thrust bearing Lhedjhx Elfjpfx Abrec Weight [kg]: approx. 160 Dimensions [L x W x H] [mm]: approx. 1050 x 600 x 1590 *) Electrical Connection Values: 3 / N / PE Supply Voltage [V]: 400 at 50 Hz Control Voltage [V]: 230 Temperature Control: Electric mica resistance heating bands Max. Processing Temperature [°C]: 300 Control Cabinet and Control Panel The electrical installation of the extruder is located in the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; the water connection must be provided by the customer. A chiller unit for cooling the water is not included in the offer. Extruder tooling is not included in the scope of supply.

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 511909V00010, Gamybos metai: 2019, veikimo valandos: 3 097 h, keliamoji galia: 1 700 kg, kėlimo aukštis: 5 750 mm, laisvas kėlimas: 1 880 mm, stiebo tipas: dupleksas, tuščias svoris: 2 390 kg, TECHNINĖS DETALĖS Keliamoji galia: 1.700 kg Ledpfxjyh Ik No Abrehc Krovos centras: 600 mm Atstumas iki krovinio: 410 mm Ratų bazė: 1.453 mm Laisvasis kėlimas: 1.880 mm Kėlimo aukštis: 5.750 mm Šakių matmenys: 50 / 100 / 1.150 mm Šakių laikiklis: ISO 2.328 A/B Šakių laikiklio plotis: 760 mm Išorinis šakių atstumas: min. 316 / 620 mm MAŠINOS DETALĖS Stiebo tipas: Duplex Matmenys ir svoris Matmenys (I x P x A): 2.499 x 1.140 mm Svoris be krovinio: 2.390 kg Ilgis su šakių atlošu: 1.349 mm Apsauginio stogo aukštis: 2.200 mm Sėdynės aukštis: 1.140 mm Ratų svirčių aukštis: 308 mm Pakelto stiebo aukštis: 6.320 mm Atstumas tarp ratų svirčių: 790 mm Akumuliatorius / Įtampa / Talpa: 48 V / 620 Ah Darbo valandos: apie 3.097 h ĮRANGA UVV: 09/26 Galinė „Blue Spot“ šviesa Naudojimo instrukcija

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 516329X00173, Gamybos metai: 2020, veikimo valandos: 981 h, keliamoji galia: 5 000 kg, galia: 15 kW (20,39 AG), tuščias svoris: 5 176 kg, The forklift has only 918 operating hours! TECHNICAL DETAILS Load capacity: 5,000 kg MACHINE DETAILS Unladen weight: 5,176 kg Drive power: 15 kW Battery voltage: 80 V Operating hours: 981 h EQUIPMENT Charger The following technical data is taken from the offer. The seller cannot guarantee its accuracy! Mast type: TELE (telescopic two-stage mast) Mast designation: TELE 2550 Closed height (h1): 2,550 mm Free lift: 160 mm Rated lift height (h3): 3,480 mm Maximum lift height (h4): 4,487 mm Base load capacity: 4,999 kg Load capacity at rated lift height (3,480 mm): 4,999 kg Load capacity at maximum lift height (4,487 mm): 4,990 kg Lhjdpfx Aoyh H Nkjbrsc Fork carriage: 6 rollers, FEM A Width: 1,200 mm With fork wear protection Forks: Length: 1,600 mm Cross-section: 130 × 60 mm Mounting: FEM A Operator’s station / Cabin Overhead guard (operator protection roof): Height approx.: 2,322 mm Storage: Storage tray / compartment in cab area Mirrors: Inside rear-view mirror, panoramic type Hydraulic controls: Mini-lever (4-way) Driver’s seat: Type MSG65 comfort seat Fabric cover Restraint system: EasyBelt (seat belt system) Drive control: Single pedal control ignition lock: Lock system 530 Electric / Lighting / Safety Work lights front: LED work lights Mounting position: on the overhead guard, top left and right Work light rear: LED work light Mounting position: on the overhead guard, top right Warning beacon: Strobe beacon on the overhead guard, switch-operated Warning system: STILL Safety Light front and rear Assistance system: Speed reduction depending on steering angle (Steering angle speed limit) Vehicle socket: 320 A DIN 43589 Schaltbau, LV version

Sąlyga: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Nanxing NCG3021L(LL) este un centru de prelucrare CNC nesting de înaltă performanță, proiectat pentru tăiere, găurire, frezare și etichetare a pieselor într-un flux de lucru complet automatizat. Acest model integrează sisteme automate de încărcare, descărcare și etichetare, combinând automatizarea, inteligența și producția bazată pe IT. Portul deschis permite conectarea cu software de proiectare mobilier și ERP, asigurând o prelucrare a panourilor complet optimizată. Software-ul profesional de optimizare FCC crește eficiența tăierii, reduce risipa și susține managementul integrat al producției. Această utilaj este soluția ideală pentru fabricarea inteligentă a mobilierului, reducând costurile de manoperă fără a compromite acuratețea sau productivitatea. Caracteristici principale Lodpfxsxcwnbo Abrshc - Sistem automat de încărcare și descărcare cu masă de ridicare 3 tone, dispozitiv de pre-push și perdele de siguranță - Sistem rotativ de etichetare cu imprimantă Honeywell – etichetarea și prelucrarea se realizează simultan - Masă de vacuum (3100×2150 mm), împărțită în 10 secțiuni pentru o priză vacuum uniformă și puternică - Două pompe de vacuum de 7.5 kW fiecare (cu ulei), pentru aspirație maximă și nivel de zgomot redus - Rigiditate ridicată a portalului – asigură precizia și stabilitatea pe termen lung chiar și la viteze mari - Electromandrină principală italiană 12 kW (HSK-63F, ATC, 24.000 rpm) cu suflare de aer internă și externă pentru evacuarea perfectă a prafului - Schimbător automat de scule (ATC) cu 12 poziții – optimizează timpul și permite operații complexe - Cap de găurire cu 21 de axe pentru găurire verticală și orizontală - Sistem automat de ungere pentru întreținere redusă și durată de viață extinsă - Sistem de aspirare praf cu puncte de extracție față și spate pentru un mediu de lucru mai curat - Design orientat spre siguranță: gard de protecție complet și barieră optică (opțional) - Sistem de control SYNTEC CNC, interfață intuitivă, compatibil cu fișiere MPR, DXF, TCN, NC Specificații tehnice - Zonă de lucru: X: 3100 mm / Y: 2150 mm / Z: 50 mm - Înălțimea mesei de lucru: 1010 mm - Viteză max. de deplasare: X/Y 70 m/min, Z 20 m/min - Electromandrină principală: 12 kW, HSK-63F, 24.000 rpm - Schimbător de scule: ATC cu 12 poziții, servocontrolat - Cap de găurire: 21 axuri verticale, 2,5 kW, 4000 rpm, max. diametru găurire Ø 35 mm - Capacitate pompe vacuum: 2×7.5 kW, 250 m³/h - Putere totală instalată: 47 kW - Dimensiuni utilaj: 13.800 × 3.950 × 2.600 mm - Greutate: 6.000 kg - Alimentare: 380V / 50Hz / 3 faze Aplicații - Producție mobilă din panouri (bucătării, dressing-uri, mobilier birou) - Tăiere și găurire nesting pentru MDF, PAL, placaj - Linii automate cu etichetare pentru fabrici inteligente Industry 4.0 Avantaje - Soluție completă: încărcare, nesting, găurire, frezare, etichetare și descărcare – toate automatizate - Eficiență ridicată: optimizare software + sincronizare duală portal pentru dublarea vitezei de procesare - Reducere forță de muncă: operator minim necesar - Ideal pentru producția de serie: calitate stabilă, precisă și constantă.

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 516220V00288, Gamybos metai: 2019, veikimo valandos: 5 918 h, keliamoji galia: 1 600 kg, kėlimo aukštis: 3 180 mm, laisvas kėlimas: 150 mm, šakių ilgis: 1 200 mm, TECHNINĖS DETALĖS Keliamoji galia: 1 600 kg Krovos centras: 500 mm Krovos atstumas: 374 mm Ratų bazė: 1 319 mm Ljdpfx Aboyh Hy Aorehc Laisvas kėlimo aukštis: 150 mm Kėlimo aukštis: 3 180 mm Šakių ilgis: 1 200 mm Šakių storis: 40 mm Šakių plotis: 80 mm Šakių ilgis: 800 mm Šakių laikiklio plotis: 980 mm ĮRANGOS DETALĖS Matmenys ir svoris Matmenys (Ilgis x Plotis x Aukštis): 2 661 x 1 099 x 2 160 mm Svoris: 3 125 kg Kėlimo stiebo aukštis išskleistas: 3 742 mm Apsauginio stogo aukštis: 2 035 mm Sėdynės aukštis: 1 058 mm Sukabinimo aukštis: 473 mm Ašių apkrova su kroviniu priekyje/gale: 4 160 / 565 kg Ašių apkrova be krovinio priekyje/gale: 1 500 / 1 625 kg Stiebo tipas: Duplex Akumuliatoriaus įtampa/talpumas: 48 V 625 Ah Darbo valandos: apie 5 918 h ĮRANGA UVV 05/26 Kroviklis Šoninis pastūmėjas Šildoma sėdynė Blue Spot priekyje ir gale LED priekiniai žibintai 2x priekyje, 1x gale Priekinis stiklas su valytuvu Šildymas Panoraminis stogas Skaitmeninis ekranas Vidinis veidrodis Instrukcija naudotojui

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 516220V00311, Gamybos metai: 2019, veikimo valandos: 5 505 h, keliamoji galia: 1 600 kg, kėlimo aukštis: 3 180 mm, laisvas kėlimas: 150 mm, stiebo tipas: dupleksas, šakių ilgis: 1 200 mm, TECHNINĖ INFORMACIJA Keliamoji galia: 1.600 kg Krovinio svorio centras: 500 mm Atstumas tarp krovinių: 374 mm Ašių bazė: 1.319 mm Laisvasis kėlimas: 150 mm Ledpfx Aeyh Hqbsbrehc Kėlimo aukštis: 3.180 mm Šakių ilgis: 1.200 mm Šakių storis: 40 mm Šakių plotis: 80 mm Šakių ilgis: 800 mm Šakių laikiklio plotis: 980 mm ĮRANGOS INFORMACIJA Matmenys ir svoris Matmenys (I × P × A): 2.661 × 1.099 × 2.160 mm Svoris: 3.125 kg Pakelto stiebo aukštis: 3.742 mm Apsauginio stogo aukštis: 2.035 mm Sėdynės aukštis: 1.058 mm Sankabos aukštis: 473 mm Ašies apkrova su kroviniu priekyje/galas: 4.160 / 565 kg Ašies apkrova be krovinio priekyje/galas: 1.500 / 1.625 kg Stiebo tipas: Duplex Akumuliatoriaus įtampa/talpumas: 48 V 625 Ah Darbo valandos: apie 5.505 h ĮRANGA Kroviklis Keičiamoji baterija Šoninis poslinkis Sėdynės šildymas Blue Spot žibintai priekyje ir gale LED žibintai 2x priekyje, 1x gale Priekinis stiklas su valytuvu Šildymas Panorama stogas Skaitmeninis ekranas Vidinis veidrodis Eksploatavimo instrukcija Pastaba: Sėdynė susidėvėjusi.

Gamybos metai: 2026, Sąlyga: naujas, The washing unit with integrated milling machine for fruit and vegetables is constructed entirely from stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruit is introduced into the water, where it undergoes a preliminary wash. Afterwards, the fruit is conveyed onward via the belt, which thoroughly cleans them using fresh water. After washing, the fruit is transferred to the mill, where it is processed with the desired screen to achieve the required mash consistency. • Easy to clean • Low maintenance requirements • Belt speed infinitely adjustable in both directions • Equipped with 2 swivel castors • Equipped with 2 fixed castors Lhjdpfx Abev Srgujrjc Technical specifications • Rated capacity: 2,000 kg/h • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1,400 mm • Connection for wash tank: G 6/4" • Connection for cleaning: G ½" • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Dimensions: Length: 2,700 mm Width: 840 mm Height: 2,270 mm Weight: 150 kg

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: W42377N00009, Gamybos metai: 2024, veikimo valandos: 8 h, keliamoji galia: 800 kg, stiebo tipas: triplex, šakių ilgis: 1 500 mm, bendras svoris: 1 995 kg, Aukštuminis keltuvas su tik 8 darbo valandomis! TECHNINĖ INFORMACIJA Keliamoji galia: 800 kg Šakių ilgis: 1.500 mm Kėlimo aukštis: 2.800 mm ĮRENGINIO DUOMENYS Išmatavimai ir svoris Išmatavimai (I x P x A): 2.200 x 820 x 2.260 mm Svoris: 1.995 kg Stiebo tipas: Trigubas (Triplex) Akumuliatoriaus įtampa / talpa: 24 V / 500 Ah Darbo valandos: apie 7,3 h Lhsdpfx Aeyh E Ekjbrsc ĮRANGA Įkroviklis Hidrauliniai kartono spaustuvai Šoninės replės (1.150 mm ilgio) Naudojimo instrukcija (PDF formatu, skaitmeninė)