CNC tekinimo staklės

MÜGA GT5-42M

Sąlyga: geras (naudotas), Gamybos metai: 1982, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, MCS Jigger High Temperature 143ºC. Type: COMBY-JIGGER JP70. Year of manufacture: 1982. Kwjdpfxefqmx Te Af Ijt Completely refurbished in 2002. Pressure: 3 kg/cm² Capacity: 9,170 L Roll width: 2,000 mm Fabric diameter: 1,100 mm Roll diameter: 324 mm Additives tank.

Gamybos metai: 2015, Sąlyga: paruoštas naudoti (naudotas), A Traub CNC twin-spindle lathe, completely overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4150 mm/2000 mm/1800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Includes chip conveyor and LNS Quick Load bar feeder. Documentation is available. On-site inspection possible. Kedpfxev Scrbj Af Ijwt

Gamybos metai: 1992, Sąlyga: naudotas, Plate heat exchanger for milk processing Ksdpfxsh Eulge Af Iowt

Sąlyga: naujas, Gamybos metai: 2024, SINGLE-BLADE TRIMMER useful cutting length from 4.2 to 8.2 m Ksdpfjfw Nv Rox Af Iewt maximum cutting thickness 160 mm parallel guide sawdust hopper

Sąlyga: naujas, DM1100 2C – Edge Rounding Machine for Laser, Flame-Cut, and Punched Parts. NEW DESIGN – CAN BE VIEWED UNDER POWER – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm in a SINGLE PASS. The first station processes the workpieces from below using two counter-rotating cross belts, while the second station works from above, also with two counter-rotating cross belts. The cross belts allow deburring of both inner and outer edges of the workpieces. Sharp edges produced during laser cutting, punching, or shearing of steel, stainless steel, and aluminum parts are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its capability to process small parts from 50 mm. By folding up a table, the rotating direction of the upper conveyor automatically reverses, and the gap of the first processing station is bridged, enabling the workpieces to feed directly into the second processing station. Thus, small products measuring from 50 mm up to 150 mm can be processed on one side only. An additional benefit of this machine is the ability to round parts with protective surface film without damaging the film. Easy and tool-free cross belt change. The program for automatic positioning of the upper and lower belts ensures good accessibility and reduces changeover times. User-friendly operation via integrated touch screen. This machine is also available with a return transport system upon request. Technical data: Working capacity (Ø mm) 1100x50 Number of cross-belt stations 2 Cross-belt speed (m/s) 2–8 Ksdpsd Ev Upofx Af Iowt Feed speed (m/s) 0.6–3.2 Cross-belt motor (kW) (4x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 13.1 Power consumption (A) 30 Extraction connection per head (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210

Sąlyga: naudotas, Gamybos metai: 2003, x-travel: 930 mm y-travel: 400 mm z-travel: 406 mm Spindle speed: 9–6750 rpm Table: 1370 x 254 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.15 mm/rev Drilling capacity in steel: 32 mm Feed range: 19–890 (x) mm/min Spindle taper: SK 40 Column overhang: 200–680 mm Total power requirement: 4 kVA Machine weight approx.: 1.15 t Space requirement approx.: 1.5 x 1.45 x 2.2 m Product information "Multifunction Milling Machine Optimill MF 4 Vario – Tool Milling Machine with Variable Speed" Optimill MF 4 Vario – Multifunctional drilling and milling machines for professional use. Electronically infinitely variable drive with frequency inverter "Made in Germany" and digital 3-axis position indicator DPA 21. Heavy, robust construction made from high-quality Meehanite cast iron. High concentricity accuracy due to tapered roller bearings, less than 0.01 mm measured in the quill. Automatic quill feed. Forward/reverse rotation for thread cutting. X and Y axes with adjustable dovetail guideways. Coolant device. Y-axis with flat guideway. Large Y-axis travel of 400 mm. Motorized table height adjustment with rapid traverse (Z-axis). Kodpfx Ajt U Rm Iof Iewt Equipment details: - Frequency inverter quality Made in EU - Drilling/Milling head tilt ±45˚ - Overhang 200–680 mm - Spindle speeds - Infinitely variable speed regulation - Particularly wide speed range - Drilling depth stop, adjustable with millimetre scale, front-reading - Safety screen, height adjustable and generously sized - Cross table, solid, generously sized, precisely surface machined - Motorized table height adjustment Z-axis - Adjustable end stops - OPTI control panel, integrated switch panel - Integrated digital position display DPA 21 with speed display - X-axis: motorized table feed, stepless speed regulation, rapid traverse, forward/reverse rotation Technical data: Product length: 1,500 mm Product width/depth: 1,450 mm Product height: 2,200 mm Net weight: 1,150 kg Total connected load: 4 kW Electrical voltage: 400 V Phase(s): 3 Ph AC power supply, supply frequency: 50 Hz Maximum face mill size: 100 mm Maximum end mill size: 20 mm Vertical spindle overhang: 200–680 mm Vertical spindle taper: ISO 40 DIN 2080 Vertical spindle speed range Number of speed ranges vertical spindle: 8 Vertical spindle speed control: electronically adjustable Horizontal milling table length: 1,370 mm Horizontal milling table width: 254 mm Distance vertical spindle to horizontal milling table, min.: 40 mm Distance vertical spindle to horizontal milling table, max.: 446 mm Horizontal table T-slot size: 16 mm Horizontal table T-slots: number 3 Horizontal table T-slot spacing: 63 mm Horizontal table max. load: 275 kg Vertical spindle drive motor (normal operation): 3 kW Coolant pump(s) drive motor: 100 W X-axis travel (manual): 930 mm Y-axis travel (manual): 400 mm Z-axis travel (manual): 406 mm X-axis travel (automatic): 850 mm Z-axis travel (automatic): 350 mm Drilling capacity steel (S235JR): 32 mm Permanent drilling capacity steel (S235JR): 28 mm Vertical spindle swing range, milling head Z-X plane: +/- 45 degrees Vertical spindle quill stroke: 127 mm Vertical spindle quill feed: 0.04/0.08/0.15 mm/rev

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, CASADEI F 25 LL FK - Spindle moulder with tilting spindle and table extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced milling unit anchored to the worktable Especially sturdy design Smooth operation due to precision assemblies and high own weight Standard with forward/reverse rotation and electronic interlock during direction change 5 speeds from 3000 to 10000 rpm Speed adjustment is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large cast iron worktable for lasting precision Easy handling thanks to controls and speed indicator on the machine front Milling fence with fine adjustment and aluminium fence jaws as standard High-performance industrial motors Equipment details: Milling fence Milling fence adjustable with crank/handwheel from the front panel With digital readout Quick-change spindle MK 4 quick-change spindle system standard on all CASADEI F 23 and F 25 models Optional sliding table Kodpfx Afsdqzcxj Iowt Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved milling guard Forward/reverse spindle rotation MK 4 quick-change spindle Milling fence adjustable with crank/handwheel from the front panel with digital readout Table extension left and right (2500 mm length) Pull-out workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data Worktable dimensions: 2500 x 810 mm Spindle tilting range: +45 to -45 degrees Usable spindle length Ø 30-35 mm: 140 mm Usable spindle length Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool diameter for profiling: 250 mm Max. tenoning tool diameter: 350 mm Max. form cutter diameter: 160 mm Max. retractable tool diameter: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle diameter at fence: 1 x 120 mm Extraction nozzle diameter under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Available immediately -

Gamybos metai: 1993, Sąlyga: naudotas, Bending length: 3,000 mm Distance between uprights: 2,750 mm Max. pressing force: 180 t Control system: CYBELEC DNC70 Kjdpfxskh Niqe Af Iswt Throat depth: 220 mm Total power requirement: 15 kW Machine weight: 11,000 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Maier ML 26 E CNC Lathe TECHNICAL DATA Number of Axes: 11 Spindle Bore: 32 mm Traverse Speed: 32 m/min Control System: Maier Pro GE-Fanuc Guide Bushing: 451.001 Main Spindle - Bar Capacity: 26 mm - C-Axis: Yes - Mechanical Indexing 5°: Yes - Spindle Stroke: 220 mm - Main Spindle Speed: 0 – 6000 rpm Kedeu S Rivepfx Af Iewt - Power: 3.7 kW / 5.5 kW (7.5 kW) - Collet: 161E Counter Spindle - Bar Capacity: 26 mm - C-Axis: Yes - Mechanical Indexing 5°: Yes - Max. Travel (Z): 220 mm - Counter Spindle Speed: 0 – 6000 rpm - Main Spindle Power: 1.1 kW - Collet: 161E Cross Machining - Base Holders for Blanks 5 pcs. 16 x 16: Yes - Number of Driven Tools: 4 - Driven Tool Power: 0.5 kW Backworking - Drive Power: 0.5 kW - Number of Tools: 4 - Number of Driven Tools: 4 - Collets: ER16 Tool Turret - Number of Tools: 16 - Number of Driven Tools: 8 - Drive Power: 0.5 kW - C-Axis: 360° - Z-Axis: 175 mm - X-Axis: 200 mm - Collets: ER16 SCOPE OF SUPPLY Including, among others (list not exhaustive): - Maier ML 26 E CNC Lathe - Oil Mist Separator - Transformer - Chip Conveyor - High-Pressure Pump / Band Filter System - Fire Extinguishing System - LNS Bar Loader - Complete Operating Documentation Exact scope of delivery as per photo documentation. No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Sąlyga: visiškai atnaujintas (naudotas), REKORD 400 MODIFIED WITH TRAY AND COOLING SYSTEM SHARPENING MACHINE FOR CIRCULAR SAWS MADE OF CARBIDE AND HSS (FULL OIL PROCESSING) Kodpfx Ash A N R Ssf Ijwt FEATURES Grinding wheel diameter: 150 mm Grinding wheel motor: 1 HP 0.25 HP movement motor for grinding carriage Cooling system indicator (fully oil-bath) Electronic cam reading system (SLOW CONTROLLED BACK FINISHING) Magnifying lamp (FOR SMALL TEETH) Sharpening speed electronically adjustable via potentiometer Manual cutting angle adjustment using scale rod No. 1 Copying wheel No. 1 Diamond wheel, diameter 150 x 4 - 60° angle No. 1 Bakelite wheel for HSS Minimum blade diameter: 30 mm (with small blade holder on request) Maximum blade diameter: 400 mm