Stalčius su metalo apdirbimo įrankiais

Lista Schubladenschrank mit Zerspanwerkzeug

Sąlyga: geras (naudotas), Gamybos metai: 1992, Fully automatic bandsaw, manufacturer: JAESPA, type: W400 AZ Control: Minipos 807, year of manufacture: 1992 Maximum cutting diameter (round material): 400 mm Giedpfegf H Saox Abdsl Saw band dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Chip conveyor Total power requirement: 4 kW Weight: approx. 2500 kg Accessories: 2x saw blades, 6 m roller conveyor with motorized drive, machine documentation available. Required space: 2.8 x 2.8 x 2 m

Sąlyga: naudotas, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture: approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feeds: longitudinal and facing Chuck flange: Short taper DIN 55022 size 4 Godpertd Uwofx Abdeil Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox ranges - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change toolholder with 1 changeable cassette - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centre point for collet chuck - Emergency stop - Hinged chuck guard - Splash guard panel - Machine lamp - Electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H: 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Gamybos metai: 1988, Sąlyga: naudotas, Voest Alpine DA 160 lathe, year of manufacture 1988, equipped with three-jaw chuck and Multifix quick-change tool post. Machine can be demonstrated under power by prior arrangement. Gijdpfxjma Snxe Abdsl

Sąlyga: naujas, Bernardo Universal Lathe Master 360 Pro Giedpfx Aed I H Izobdol Centre Distance: 1000 mm Centre Height: 180 mm Swing over Bed: 360 mm Swing over Gap*: 502 mm Swing over Cross Slide: 220 mm Bed Width: 185 mm Spindle Bore: 52 mm Spindle Mount: DIN 55029, D1-5 Spindle Speed Range (8): 70 - 2000 rpm Longitudinal Feed Range (32): 0.052 - 1.392 mm/rev Cross Feed Range (32): 0.014 - 0.380 mm/rev Metric Threads (26): 0.4 - 7.0 mm Imperial Threads (34): 4 - 56 TPI Tailstock Quill Diameter: 42 mm Tailstock Quill Stroke: 100 mm Tailstock Taper: MT 3 Rated Motor Power S1 100%: 1.5 kW (400 V) Motor Power Consumption S6 40%: 2.2 kW (400 V) Machine Dimensions (W x D x H): 1825 x 750 x 1600 mm Weight approx.: 576 kg *Removable Gap Bed Length: 205 mm Scope of Delivery: • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-200 mm / D5 • Face plate 200 mm / D5, per DIN 55029 • Fixed steady rest – max. workpiece diameter 70 mm • Travelling steady rest – max. workpiece diameter 60 mm • Coolant system • Initial fill with Shell Tellus 46 • Pull-out chip tray • Clamping plate 280 mm • Four-way tool post • Safety guard for four-way tool post • Safety slip clutch • Micrometer longitudinal stop • Thread dial indicator • LED machine lamp • Reducing sleeve • Change gears • 2 centre points • Foot pedal with brake function (CE compliant) • Motor with electromagnetic brake (CE compliant) • Base with drawers • Operating tools

Sąlyga: labai geros būklės (naudotas), Bore diameter: 1.5 - 165 mm Stroke: 80 - 160 mm Spindle speeds: 200 - 2500 rpm Stroke speed - under load: 80 - 310 strokes/min Total power requirement: 0.9 kW Machine weight: approx. 0.6 t Space requirements: approx. 1.2 x 1.0 x 1.6 m Precision cross-honing machine with automatic measuring control Includes: workpiece holders, small measuring table, digital dial gauge, tool accessories, Gjdpfx Abowva Rnedeil

Sąlyga: naudotas, Gamybos metai: 1955, Technical details: Swing diameter over bed: 420 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Swing diameter in gap: 600 mm Spindle speed range: 24 - 900 / 8 steps rpm Spindle bore: 41 mm Feed range x-axis: 0.0120 - 0.1000 mm/rev Feed range y-axis: 0.0062 - 0.0302 mm/rev Tailstock quill taper: MT 3 Tailstock quill travel: 220 mm Total power requirement: approx. 4.0 kW (not guaranteed) Machine weight approx.: 1.2 t Machine dimensions approx. LxWxH: 2.3 x 0.9 x 1.3 m Equipment: 3-jaw chuck Röhm Ø 200 mm Gsdpju Ix D Aofx Abdeil 4-way tool post, swivels 30° right/left 2x T-slots for copying device Live center

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3595, Dear Sir or Madam, For sale is a Weiler Commodor B lathe from year of manufacture 2001, equipped with a Heidenhain 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop. Among other things, the main spindle bearings as well as the lead/feed screw bearings have been completely replaced! Giedpfx Absthd Shjdjl Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify on site. Availability: on request Machine no.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Possible threads: Metric, Imperial, Module, Diametral-Pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, removable chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various clamping jaws... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can carry out a complete or partial overhaul of the selected machine - Upon request, we can repaint the selected machine in your preferred color - Upon request, you can order additional accessories such as tools directly - Upon request, we can also install further accessories, such as safety equipment - We are happy to take care of shipping and/or installation

Sąlyga: geras (naudotas), Gamybos metai: 1963, Vertical Turning Lathe Manufacturer: JUNGENTHAL, Type: DK 1400, Year: 1963, equipped with 1-axis digital readout. Maximum turning diameter: 1400 mm Faceplate: 1250 mm automatic turret head Spindle speeds: 3.5-180 rpm Feeds: 0.063 - 3.15 mm/rev Rapid traverse: 1800 mm/min Giodpfjvi Hryjx Abdel For additional specifications, please refer to the data sheet. Machine documentation available. Dimensions: Length 4 m, Width 2.4 m, Height 3 m, Weight 16 t In good overall condition.

Sąlyga: naudotas, Gamybos metai: 2003, x-travel: 930 mm y-travel: 400 mm z-travel: 406 mm Spindle speed: 9–6750 rpm Table: 1370 x 254 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.15 mm/rev Drilling capacity in steel: 32 mm Feed range: 19–890 (x) mm/min Spindle taper: SK 40 Column overhang: 200–680 mm Total power requirement: 4 kVA Machine weight approx.: 1.15 t Space requirement approx.: 1.5 x 1.45 x 2.2 m Product information "Multifunction Milling Machine Optimill MF 4 Vario – Tool Milling Machine with Variable Speed" Optimill MF 4 Vario – Multifunctional drilling and milling machines for professional use. Electronically infinitely variable drive with frequency inverter "Made in Germany" and digital 3-axis position indicator DPA 21. Heavy, robust construction made from high-quality Meehanite cast iron. High concentricity accuracy due to tapered roller bearings, less than 0.01 mm measured in the quill. Automatic quill feed. Forward/reverse rotation for thread cutting. X and Y axes with adjustable dovetail guideways. Coolant device. Y-axis with flat guideway. Large Y-axis travel of 400 mm. Motorized table height adjustment with rapid traverse (Z-axis). Equipment details: - Frequency inverter quality Made in EU - Drilling/Milling head tilt ±45˚ - Overhang 200–680 mm - Spindle speeds - Infinitely variable speed regulation - Particularly wide speed range - Drilling depth stop, adjustable with millimetre scale, front-reading - Safety screen, height adjustable and generously sized - Cross table, solid, generously sized, precisely surface machined - Motorized table height adjustment Z-axis - Adjustable end stops - OPTI control panel, integrated switch panel - Integrated digital position display DPA 21 with speed display - X-axis: motorized table feed, stepless speed regulation, rapid traverse, forward/reverse rotation Technical data: Product length: 1,500 mm Product width/depth: 1,450 mm Product height: 2,200 mm Net weight: 1,150 kg Total connected load: 4 kW Electrical voltage: 400 V Phase(s): 3 Ph AC power supply, supply frequency: 50 Hz Maximum face mill size: 100 mm Maximum end mill size: 20 mm Vertical spindle overhang: 200–680 mm Vertical spindle taper: ISO 40 DIN 2080 Vertical spindle speed range Number of speed ranges vertical spindle: 8 Vertical spindle speed control: electronically adjustable Horizontal milling table length: 1,370 mm Horizontal milling table width: 254 mm Distance vertical spindle to horizontal milling table, min.: 40 mm Distance vertical spindle to horizontal milling table, max.: 446 mm Horizontal table T-slot size: 16 mm Horizontal table T-slots: number 3 Gsdpfx Abet U Rm Iedeil Horizontal table T-slot spacing: 63 mm Horizontal table max. load: 275 kg Vertical spindle drive motor (normal operation): 3 kW Coolant pump(s) drive motor: 100 W X-axis travel (manual): 930 mm Y-axis travel (manual): 400 mm Z-axis travel (manual): 406 mm X-axis travel (automatic): 850 mm Z-axis travel (automatic): 350 mm Drilling capacity steel (S235JR): 32 mm Permanent drilling capacity steel (S235JR): 28 mm Vertical spindle swing range, milling head Z-X plane: +/- 45 degrees Vertical spindle quill stroke: 127 mm Vertical spindle quill feed: 0.04/0.08/0.15 mm/rev

Gamybos metai: 1993, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeder for 2 workpieces, in good condition Giodocc D Ddjpfx Abdsl Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Chuck diameter for pull heads: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Features: The machine is equipped with a workpiece table and a pull bridge for 3 stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. The locking of the shank and end-piece holders is hydraulic. The machine comes with a coolant system with an integrated magnetic conveyor for chip removal, allowing operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale production. It is in very good condition and still retains its original paintwork. The machine is under power and can be inspected at our warehouse.