Kiti

linde P250 Schlepper AHK Schiebetüren

Būklė: naudotas, kuro tipas: elektrinis, kuras: elektra, Spijkstaal transporto priemonė    • Visiškai elektrinė Iodpfxsx S Np Ej Af Hotk    • Įskaitant registracijos numerį    • Įskaitant akumuliatoriaus įkroviklį    • Didžiausias greitis 18 km/val    • Paruošta darbui Būklė: Naudota

Būklė: naudotas, Gamybos metai: 2004, bendras ilgis: 6 240 mm, Traktorius Rofan TPR-10 Variklio tipas: dyzelinis Iedpoxyalkofx Af Hjtk Metai: 2004

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2010, keliamoji galia: 1 000 kg, kuro tipas: elektrinis, Įranga: apšvietimas, priekabos jungtis, priekinė apsauga, Electric tow tractor with trailer and charger, 6 km/h, load capacity 1,000 kg, trailer load capacity 2,000 kg, Iedsrai D Eepfx Af Hjtk

Būklė: naudotas, Gamybos metai: 1978, Technical details: Drilling capacity in steel (diameter): 100 mm Throat depth: 400 - 2100 mm Vertical travel of arm: 100 mm Spindle taper: MK 50 Drilling depth: 415 mm Spindle stroke: 400 mm (scale) Column rotatable: 360° Column diameter: Ø 500 mm Distance head - clamping surface (min./max.): 400 / 1,800 mm Spindle speed range: 12.5 – 1,600 rpm / 15 steps Feed rate: 0.063 – 2.5 mm/rev / 15 steps Table clamping area (L x W): 2,000 x 950 mm Total power requirement: approx. 35 kW Machine weight approx.: w/o cube = 8.0 t Machine dimensions (LxWxH): 3.40 x 1.16 x 3.51 m Additional information: - Horizontal travel of drilling spindle: 1,700 mm Iodpfxou Id Awo Af Hjtk Equipment: - incl. drilling cube (horizontal surface: 1,000 x 1,000 x 500 mm, center bore Ø 35 mm; 6 T-slots), (vertical surface: 1,000 x 500 mm, 3 T-slots) - Control panel - Coolant system

Būklė: labai geros būklės (naudotas), Gamybos metai: 1984, galia: 17 kW (23,11 AG), įvesties srovės tipas: trifazis, spaudimo jėga: 160 t, eigos ilgis: 500 mm, darbinis greitis: 200 mm/s, atbulinės eigos greitis: 125 mm/s, stalo plotis: 900 mm, stalo ilgis: 630 mm, gerklės gylis: 800 mm, stūmoklio plokštės plotis: 700 mm, ramplokštės ilgis: 450 mm, alyvos bako talpa: 500 l, bendras ilgis: 22 000 mm, bendras plotis: 12 500 mm, bendras aukštis: 34 500 mm, bendras svoris: 7 000 kg, darbinis slėgis: 160 juosta, įrengimo aukštis: 800 mm, slėgis: 250 juosta, Hidraulinė presas PYE 160 S/1M. Gamybos metai: 1984. Gamintojas: VEB Wema Zeulenroda (Vokietija). Mašina po kapitalinio patikrinimo. Parametrai: Didžiausia presavimo jėga – 160 t. Darbinis slėgis 16 MPa. Viršutinis stalas 700 x 450 mm. Apatinis stalas 900 x 630 mm. Praėjimas 800 mm. Cilindro eiga 500 mm. Nuleidimo greitis 200 mm/sek. Pakėlimo greitis 125 mm/sek. Galingumo poreikis 17 kW. Alyvos bako talpa 500 l. Svoris 7000 kg. Aukštis 3450 mm, ilgis 2200 mm, plotis 1250 mm. Mašina labai geros būklės. Yra galimybė apžiūrėti bei patikrinti presą veikimo metu. Iedoqy E I Ropfx Af Hotk

Būklė: naudotas, Gamybos metai: 1977, Pressure 160 t Throat depth 360 mm Stroke 560 mm Total power requirement 33 kW Machine weight approx. 6000 kg Space requirements approx. 2000x2400x3650 mm F R I T Z M Ü L L E R Hydraulic Single-Column Drawing Press Model: CEZ 160.5.8 Year of manufacture: 1977 / 2004 Serial no.: 856597 ----- Upper ram pressing force: 160 t Return stroke pressing force: 16 t Drawing cushion pressing force: approx. 40 t Ram surface: approx. 800 x 600 mm Table size: approx. 900 x 720 mm Table bore: 160 mm Max. installation height: 700 mm Throat depth: 360 mm Table height above floor: 900 mm Ram bore for tooling: 50 mm Upper ram stroke: approx. 560 mm Drawing cushion stroke: approx. 200 mm Itedst Hw E Iepfx Af Hek Total drive: approx. 30/33 kW – 400 V – 50 Hz Weight: approx. 6,000 kg Machine dimensions LxWxH: 2000 x 2400 x 3,650 mm Accessories / Special Features: • Integrated hydraulic drawing cushion in the table with adjustable cam strip for stroke length • Side-mounted cam strip for upper ram stroke adjustment including switches for rapid traverse, working stroke, and return • Two-hand engagement controls mounted at the front of the table, foot switch, etc. • Built-in filter pump, pressure display via manometer above the cylinder • Integrated shock-absorbing cutter, piece counter, etc. • Free-standing control cabinet, completely replaced in 2004 ex works, with time switch for press cycle and indicator lights • Overhauled/modernized hydraulics with integrated oil cooler Condition: Good – shortly available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice We kindly request your order. A further selection of hydraulic presses is always available in our warehouse, please contact us for inquiries.

Būklė: naudotas, Gamybos metai: 2023, bendras ilgis: 3 650 mm, • 8x batteries, 215-260Ah • 1x socket in the platform basket • Residual current circuit breaker (RCCB) • Generator • Built-in battery charger • Maximum ground pressure 14.0 kg/cm² • Travel speed (lowered): 6.0 km/h • Turning radius (outer): 2.60 m • Turning radius (inner): 0.75 m • Gradeability: 30% • Working height: 12.65 m • Working outreach (standard platform): 6.05 m • Articulation height: 7.12 m • Slew angle (non-continuous rotation): 345° • Platform capacity: 1,200 kg • Basket arm – total length: 4.14 m • Basket arm – vertical working range: 120° (+60° / –60°) • Rear entry with sliding latch • Fully proportional joystick for drive and lift functions with integrated rocker for thumb steering • 2 mini-joysticks provide proportional control of lift and lowering for mast and basket arm • 4.14 m articulated boom • Function activation with enlarged LCD status display • Load monitoring system Ijdpfxexd Hx Ss Af Hetk • AC power outlet in the work platform • Large tool tray • Direct, electric two-wheel drive • Brushless AC drive motors • Faster battery charging • Automatic power saving function when idle • Power reduction in case of deep discharge • Onboard diagnostics system with integrated display • Automatic rear wheel brakes • Curved protective covers made of polyester • Motorized basket rotation • High-performance steel-roller telescopic mast, 345° rotation • Chain slack detection • 3° tilt alarm with warning light • Frame width: 1.20 m • Lifting and tie-down lugs • Key-secured selector switch for ground controls • Battery level indicator • Operating hours counter • Horn • Travel direction system • Harness anchor points • Xenon rotating beacon • Manual emergency lowering • Passive pothole protection • Tyres (non-marking): 457 x 178 mm • Electrical system: 48V DC • Batteries (deep cycle): 4 x 48V – 260 Ah • Battery charger onboard, 110 V / 230 V HF • Drive motors: 2 AC motors • Electric (pump) motor: 3.5 kW, 48 V DC • Hydraulic system: hydraulic tank 15 l

Būklė: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, galia: 10 kW (13,60 AG), veleno tvirtinimas: MK 6, aukščio reguliavimo tipas: elektrinis, bendras plotis: 11 000 mm, bendras ilgis: 28 300 mm, bendras aukštis: 31 600 mm, gerklės gylis: 1 680 mm, bendras svoris: 5 700 kg, gręžimo pajėgumas: 75 mm, plunksnos brūkšnys: 400 mm, veleno greitis (maks.): 1 600 aps./min, veleno greitis (min.): 10 aps./min, Radialinis gręžtuvas WRA 632 economic. Pagaminimo metai: 2000. Gamintojas: H. CEGIELSKI PL. Morse kūgis 6. Svirtis 1600 mm, Didžiausias gręžimo pliene skersmuo – 65 mm, ketaus – 75 mm, Didžiausias sriegimo pliene skersmuo – M56, ketaus – M68, Veleno skersmuo 100 mm, Veleno eiga 400 mm, Veleno sukimosi greičių skaičius 12 nuo 10 iki 1600 aps./min., Padavimų skaičius 8 nuo 1,14 iki 2,04 mm/1 aps., Isdpfx Ajtp Swwjf Hotk Veleno nuotolis nuo kolonos: minimalus 335 mm, maksimalus 1600 mm, Atstumas nuo veleno iki pagrindo: mažiausias 390 mm, didžiausias 1680 mm, Pagrindo darbinis plotas 1760 x 1020 mm, Darbinio stalo (kubo) matmenys 750 x 500 x 1200 mm, Išmatavimai (aukštis x ilgis x plotis) 3160 x 2830 x 1100 mm, Svoris 5700 kg, Bendra reikalinga galia 10 kW,

Būklė: naudotas, Technical specifications: Drilling capacity in steel (diameter): 32 mm Arm reach: 1250 mm Maximum workpiece height: – mm Distance from column to spindle center: 1250 mm Horizontal travel of drilling head: 980 mm Vertical adjustment of arm: 800 mm Distance table to bottom of spindle: 2.05 x 9.2 x 2.85 mm Spindle taper: MK4 Drill spindle stroke: 280 mm Infinitely variable speed range: 28–1,195 rpm (3 steps) Arm swivel range: 90 degrees Feed rates: 0.1/0.2/0.3/0.4/0.8/1.2 mm/rev (6 steps) Column diameter: 300 mm Itodpfx Aswid Auef Hek Base plate clamping area: 1,370 x 750 mm Approx. machine weight: – t Machine dimensions (L x W x H): 2.05 x 9.2 x 2.85 m Coolant system with feed Table with clamping surface 1,370 mm x 750 mm Including drill cube *

Būklė: naudotas, rida: 1 432 km, pavaros tipas: kitas, kuro tipas: elektrinis, spalva: raudona, bendras svoris: 2 878 kg, tuščias svoris: 2 165 kg, didžiausias leistinas svoris: 2 000 kg, pirmoji registracija: 05/2009, emisijos klasė: nėra, pakaba: kitas, Gamybos metai: 2009, veikimo valandos: 1 432 h, vairuotojo kabina: kitas, kuras: elektra,