Kundig Premium-2 1350-RG

Kundig Premium-2 1350-RG

Gamybos metai: 1997, būklė: geras (naudotas), • Working width (mm): 1300 • CSD system Kedoidi Ivepfx Agfjlp • Cross sanding unit • Longitudinal sanding unit - shoe • Brush unit • Ionization

Būklė: paruoštas naudoti (naudotas), Two identical machines are available: Machine 1 is missing the table, Machine 2 requires servicing. Both machines are operational. Working width: 1800 mm, table length: 16,000 mm. Supplied with documentation. An on-site inspection is possible. Kedpfx Agjq T Sinofelp

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, reikalingas plotis: 3 200 mm, vietos reikalavimas ilgis: 1 200 mm, reikalingas aukštis: 2 100 mm, bendras svoris: 170 kg, bendras plotis: 3 200 mm, bendras ilgis: 1 700 mm, vidinis plotis: 1 500 mm, HEAVY DUTY Drying Wagon / Cantilever Wagon – For the Toughest Demands Key facts at a glance: Kledpfx Aofiuhvjgfjp 1. Ball-bearing slide rail for adjustable width from 1.70 to 3.00 m span 2. Space-saving, can be nested into each other 3. High clearance between levels – 135 mm for easy loading, even with fast work cycles 4. Upright, square-section frame for minimal support surface 5. Deep usable depth – 1,000 mm 6. High load capacity – 1,000 kg 7. Premium quality rollers, easy to move even when loaded Simply top-quality – Made in Denmark. The wagons are generally available directly from stock. To save shipping costs for our customers, we deliver the wagons pre-assembled (see picture). Set-up is quick and easy. Any questions? Contact us – we are happy to help!

Būklė: naudotas, Painting line consisting of: Pos.1 Belt Conveyor Infeed - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed rate adjustable via handwheel ~ 2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.2 Cefla Dust Removal Machine - Manufacturer: Sorbini - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm ± 20 mm - Operator side: right - Roller transport - 2 upper air blast ducts - 1 lower air blast duct - Dust removal brush Kjdpjv I Akvefx Agfelp - With ionizing bar above - With ionizing bar below - With own drive - With independent control system - Length: approx. 910 mm - Width: approx. 2,600 mm - Weight: 1,260 kg - Extraction port diameter: 180 mm + 120 mm - Total connected load: 7.6 kW - Voltage, Frequency: 400 V / 50 Hz Pos.3 Venjakob VEN SPRAY Perfect Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Operator side: left - IR pre-heating, number of emitters: 2 pcs. - Dual spray gun drive - Dry extraction - Extraction port diameter: 600 mm - Exhaust air capacity: 10,000 m³/h - Belt conveyor system - Continuously variable feed rate ~ 4–10 m/min - Belt cleaning system - Paint recovery via V-belt system - Gun control EPS-CNC 7000 - Color management system for 3+1 pump units - Number of installed Airless spray guns: 4 pcs. - Quick-change system for spray units - Remote maintenance system - Dust protection hood at the machine outlet - Exhaust air recirculation system - Extraction fan air control - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: ~20–26 kW - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small batch container - Spray gun boom system for quick removal of 4 AirMix spray guns from the spray cabin, incl. quick couplings for pneumatic and material hoses. Pos.4 Venjakob Belt Conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.5 Cefla Vertical Dryer - Manufacturer: Cefla - Model: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of pallets: 30 pcs. - Pallet length: 5,600 mm - Usable pallet length: 5,300 mm - Load capacity per pallet: 300 kg - Max. part height: ~110 mm - Clear height between pallets: 120 mm - Distance: center of pallet to center of pallet: 3,658 mm - Max. part length: ~5,200 mm - Number of controllable temperature zones: 2 pcs. - Fresh air capacity: 6,000 m³/h - Exhaust air capacity: 6,000 m³/h - Max. heating capacity: 175 kW - Max. drying temperature: ~55–60 °C - With heat exchanger, hot water - Without hot water control valves - U-shaped pass-through configuration - Infeed side right - Feed speed via frequency inverter ~2–20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: ~23 kW - Voltage, Frequency: 400 V / 50 Hz - Voltage fluctuations max. ±5% - Without control valves and water pumps Pos.6 Belt Conveyor Infeed - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035

Būklė: labai geros būklės (naudotas), Panel loading at 15 cycles per minute, complete with motorized roller conveyors Kodpfshv Sttex Agfelp Loader

Būklė: naudotas, mašinos/transporto priemonės numeris: 008027, Maks. apdirbamas plotis: 1350 mm Klsdpfewvq E Aex Agfep Min. apdirbamas storis: 200 mm Darbo stalas: fiksuoto aukščio Vakuuminis transporteris: taip Darbo agregatų skaičius: 4 vnt.

Būklė: paruoštas naudoti (naudotas), A precise textile cutting machine from Kuris, including peripheral equipment, is available. Cutting height: 55mm, maximum cutting speed: 45m/min, positioning speed: 60m/min, working width: 1930mm, machine weight: approx. 4000kg. Includes a 50kW vacuum pump and tables. Documentation is available. An on-site inspection is possible. Kodpfx Agov R Ew Rsfslp

Būklė: naujas, Gamybos metai: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main region and North Rhine-Westphalia). These enquiries will not be answered. Equipment and Technical Data: The Master delivers precision sanding, embodying the essence of our 75 years’ experience in sanding technology. This means it comes equipped—out of the box—with all the features essential for fast and reliable production of perfect surfaces. Nothing more, nothing less. The core Kündig Master model is fitted with a calibration roller and a sanding pad unit. Its proven construction guarantees decades of high-precision sanding, even across the generous working width of 1350 mm. Additionally, there is an integrated control unit for rapid and intuitive operation. Sanding Units – Proven Combination The sanding section uses the tried-and-tested combination of calibration roller and sanding pad. For safe workpiece feed, a parallel-sprung steel pressure roller is located at the machine infeed, while rubber pressure rollers are positioned between the sanding units. Calibration Unit (R): The calibration unit features a grooved rubber contact roller with proven hardness, ideal for calibration tasks and capable of handling high removal rates if required. The contact roller height is continuously adjustable to compensate for the thickness of the applied abrasive. Segmented Sanding Pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad (instead of a pneumatic system), with a sensor width of 35 mm. This allows for even greater precision when fine sanding workpiece edges. The edge pressure of the sanding segments is automatically regulated, but can also be finely adjusted using the touchscreen, allowing targeted sanding of workpiece edges. The graphite glide covering is also quick and easy to change. Klodpfow Naanex Agfep Summary of Features Construction: In terms of robustness and durability, the Master stands equal to our other model ranges. It features the same heavy-duty build quality that makes all our machines long-term investments, ensuring precise sanding results for many years to come. Upper Section Adjustment: For over 30 years, we have equipped our machines exclusively with upper section adjustment. Why? It is more complex to engineer than table adjustment, but it offers clear advantages: greater weight capacity for workpieces, consistent precision over time, and the benefit of a fixed working height. Workpiece Dimensions: The opening (clearance) adjustment of the upper section is motorized and finely controlled via touchscreen. Maximum workpiece height is 160 mm. With a 1350 mm working width, the Kündig Master provides the generous and proven industry-standard dimension.

Būklė: naujas, With air flow rates of up to 22,000 m³/h, the stationary compact filter systems of the ECO JET series offer a wide range of applications. They are the ideal extraction solution for machines in diverse manufacturing sectors and industries, including larger processing machines. Eligible for BAFA subsidies according to Module 4. ECO JET series systems are equipped with clean-air side fans which draw dust- and chip-laden air to the filter unit. For the most powerful DUO models, two fans are connected in parallel. A flange at the filter unit inlet allows for the connection of customised duct diameters. The airflow within the separator chamber is aerodynamically optimised so that coarse particles are directly separated before reaching the filter bags. Remaining dust collected by the filters is automatically cleaned off by the AL-KO OPTI JET® filter cleaning system; the separated material is discharged into mobile collection bins located below the filter. Applications: - Extraction at production machines, machining centres, and ductwork systems with multiple extraction points - Direct extraction in continuous operation - Suitable for industries such as woodworking, joineries, carpentries, furniture production, plastics manufacturing and processing, paper production, orthopaedic industry, and many more Advantages: - Comprehensive range of standard extraction units with numerous customer-specific adaptations and options - Consistently high suction performance thanks to integrated pre-separator and AL-KO OPTI JET filter cleaning system - Heating cost savings as 100% recirculating operation is possible in many cases - Minimal space requirement due to compact design - Suitable for indoor and outdoor installation Kljdpswwtuiofx Agfjp - Available in ATEX-compliant versions - Extensive accessories and a wide range of options for customised system configuration - Eligible for BAFA subsidies according to Module 4

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, bendras ilgis: 4 400 mm, darbinis plotis: 1 400 mm, aukščio reguliavimo tipas: elektrinis, įėjimo dažnis: 50 Hz, įėjimo įtampa: 400 V, Hello, we offer for sale a Heesemann LSM 8 wide belt sander in a configuration with four sanding units: cross-belt unit / longitudinal unit with calibration drum / longitudinal unit with reverse / longitudinal unit with de-dusting brush The machine has undergone mechanical refurbishment and inspection, checked and set up, ready for operation. Year of manufacture: 1997 Feed speed: 5-25 m/min – infinitely adjustable from the control panel Working height: 880 mm Workpiece thickness: 3-80 mm Power requirement: 107 kW – at full load Total weight: 10,250 kg Control: control panel with physical buttons and display Control and abrasive belt change side: right Kljdou Hlzfepfx Agfop Single, perforated feed belts, perforated table with channel and vacuum fan – for safe transport of short workpieces. Element hold-down: rubber-coated rollers, diameter 70 mm. Abrasive belt Q unit: 5,400 mm x 150 mm Motor power: 13/17 kW – two-speed motor – belt speed 12 m/s / 24 m/s "Sergeant" belt: 4,850 mm x 141 mm Longitudinal belt L unit: 2,620 mm x 1,450 mm Motor power: 16.5 kW / 21 kW – two-speed motors – 10 m/s / 20 m/s Pressure: Hold-down beams with computer-controlled selective pressure adjustment – CSD® system for seamless, multi-row feeding with smooth adjustment of individual pressure elements. Controller roller reading distance: 16 mm. Abrasive belts feature a cleaning system – air blast and dust extraction. Workpiece thickness tolerance compensation up to 2 mm via maintenance-free electromagnetic hold-downs. Working width as well as the start and end position of the sanding pressure beam are electronically controlled. Abrasive belt cleaning via blowing tubes; dust extraction via integrated extraction channels; air blast activation is automatic upon workpiece detection in the machine. At the end: cleaning/de-dusting brush, 150 mm diameter, with extraction channel for dust removal. Additional blow rotors at the machine outfeed with an extraction channel. Commissioning at your location and basic operational training – to be arranged. Price negotiable on request, machine available immediately.