Naudojamos plieninės sandėliavimo dėžės, tvirta konstrukcija, 4 sienų sandėliavimo konteineriai, ilg

Kruizinga 98-6942GB

Sąlyga: naudotas, Sweeping width: 800 mm Container volume: 114 l Total power requirement: 3.0 kW Practical area coverage: 2,759 m²/h Dsdpfog Ti Ihox Ab Sekg Maximum area coverage: 5,232 m²/h Sweeping machine - Scrubber dryer Operating hours: approx. 400 hrs Includes 4 brushes + charger Includes new battery pack (consisting of 6 gel batteries) !!

Sąlyga: beveik kaip naujas (naudotas), Rotary vane vacuum pump with oil bath. Available in stock. Fully overhauled pump. Comes with warranty. Nominal capacity: 300 m³/h Ultimate vacuum: 0.1 mbar abs. Djdoftzzgspfx Ab Sokg If you have any questions, please contact us.

Sąlyga: geras (naudotas), Funkcionalumas: nepatikrintas, bendras svoris: 80 kg, bendras plotis: 990 mm, bendras aukštis: 870 mm, bendras ilgis: 1 180 mm, krovimo aukštis: 800 mm, bakelio talpa: 900 l, tuščias svoris: 80 kg, We hereby offer you, subject to prior sale, approximately 200 used steel stacking boxes / storage containers, made of galvanized sheet steel. Manufacturer: unknown Overall dimensions of the stacking box: 1180 x 990 x 870 mm (L x W x H) Stacking height: 800 mm Internal height: 700 mm Box volume: approx. 0.9 m³ Weight: approx. 80 kg/unit Notes: The steel stacking boxes were previously used by the former owner on construction sites as containers for segregated construction waste. They were emptied into larger transfer containers via forklift with rotator attachment. Therefore, these stacking containers were manufactured with extra heavy-duty walls. The sale is subject to prior sale, excluding any warranty or guarantee, to commercial customers only. Dksdpfx Asvtckmsb Sog We would be pleased if these steel stacking containers are of interest to you. Best regards, Your Service Team, Mertens & Frowein GmbH

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 510 mm, ašies variklio galia: 25 W, bendras svoris: 5 600 kg,

Gamybos metai: 2007, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 1380-1207, mit Siemens Sinumerik Bedienpult mit Späneförderer Bedienpult Schaltschrank Dodom Nb Rijpfx Ab Sjkg Spindeldurchlass 60 mm max. Werkstücklänge 340 mm

Sąlyga: naudotas, Gamybos metai: 2000, Workpiece diameter – max. 40 mm Workpiece diameter – min. 10 mm Workpiece length: 200 – 640 mm Control: PLC Siemens S5 95 U Total connected load: 25 kW Machine weight approx. 5 t Required floor space approx. 8.5 x 2.8 x 2.35 m Hydraulic automatic cut-to-length and double-end machining unit, suitable for pre-processing trapezoidal threaded spindles as well as other round workpieces, via bar cutting and simultaneous end machining such as chamfering, facing, and drilling, with stationary parts and rotating tools. Machine consists of: - Base machine model TR 60/4-650, workpiece length up to 640 mm - Bar magazine for bar length 2 - 3.5 m - Standard version for solid material up to 40 mm diameter - Central position for bar feed rollers - Bar feeding unit - Standard version feed gripper - Rotary indexing table with 4 clamping stations, model TR 300.00 - 4 base jaws, width 80/140 mm, diameter 75 mm - Rotary indexing table pivotable in both directions - Saw unit with worm drive TR 200.00, stroke 100 mm Dksdovp Sd Ijpfx Ab Ssg - Saw blade 350 mm, speed 25/39 rpm - Motor power 2.6 / 3.2 kW - Motorized positioning of the saw head - Automatic positioning of the saw frame with hydraulic clamping - Saw blade guide - Machining unit no. 1 – USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid traverse 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 2 – USP.00/M - UF - Speeds 360/720 rpm, kW 1.8/2.8 - Working stroke 80 mm - Rapid traverse 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Thread cutting attachment for right and left handed threads - Machining unit no. 3 – USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid traverse 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 4 – USP.00/M - Speeds 943/1882 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid traverse 40 mm - Spindle mount ISA 40/M 16 - Discharge chute - Metric rulers for all adjustment movements - Hydraulic system with feed pump SAUER SUNDSTRAND - Accumulator - Rexroth flow controller for machining units and saw - Coolant system with filter and tank - Coolant pump CALPERA - Electrical installation in separate control cabinet, Control voltage 24V/50 Hz - PLC SIEMENS S5 95 U - Machine light - Signal beacon for machine stoppage - Central lubrication - Chip conveyor In 2011, an extensive mechanical overhaul was carried out to optimize positioning and centering accuracy for €25,000. Additionally, switches, some cables, ball bearings, seals, hydraulic hoses, etc. were also replaced. In recent years, the machine has seen very little use; the total operating hours are estimated by the seller at around 24,000. This is a used machine, therefore we sell under exclusion of any warranty. STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM.

Sąlyga: naudotas, Miltelinio dažymo linija – automatinė Linija veikia su konvejerine sistema. Dažomą medžiagą pakabinama ant linijos, o sistema automatiškai atlieka žemiau nurodytus etapus ir atlikusi valymą padengia medžiagą milteliniu dažymu. Dksdpfx Abjv Npa He Ssg Pagal esamą objektą parenkamas tinkamiausias projektas. Specialus dizainas kuriamas pagal kliento gaminį ir poreikius.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: XP2000, bendras aukštis: 7 550 mm, bendras plotis: 2 780 mm, bendras ilgis: 3 070 mm, keliamoji galia vienai sandėliavimo sekcijai: 500 kg, statybinis aukštis: 7 600 mm, įvesties srovės tipas: trifazis, įėjimo įtampa: 415 V, tuščias svoris: 500 kg, garantijos trukmė: 12 mėnesiai, keliamoji galia: 20 000 kg, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, Kardex Shuttle 500 XP2000 415V Farbe: Blau & Grau Maximale Traglast pro Fach: 500 kg Anzahl der Fächer: 40 Gesamttraglast der Maschine: 20.000 kg Dsdpfjrgqw Ejx Ab Sskg Fachmaße (B x T): 2.450 mm x 864 mm Maschinenmaße (L x B x H): 7.550 mm x 2.780 mm x 3.074 mm Diese Maschinen sind modular aufgebaut und können in der Höhe angepasst werden, um in jede Einrichtung zu passen. Kompletter Installationsservice mit 12 Monaten Garantie verfügbar. Lieferung auch ohne Garantie möglich. Service und Wartung nach der Installation bei Bedarf erhältlich.

Sąlyga: naudotas, Gamybos metai: 2008, Technical details: Workpiece diameter - max.: 29 mm Workpiece diameter - min.: 26 mm Workpiece length: 66 mm The system was originally delivered for the following workpiece sizes: diameter 26 mm - 29 mm, length 65 mm - 66 mm. By changing parts in the clamping device, handling units, etc., diameters up to approx. Ø50 mm could likely be processed. Dedpfelqac Sox Ab Sjkg A total length of just under 400 mm should be possible with some modifications. This is also dependent on tool lengths, processing lengths on the component, etc.

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Specialized press designed from the ground up for briquetting iron, steel, and similar alloys. Features integrated oil collection mats. Does not include a packaging table—only briquette guides (rails) are provided. Comes standard with transparent bunker doors and oil heating elements. The machines are operated via Siemens KTP-400 touchscreens. 2nd generation available for purchase from February 2024. Please contact us first regarding this press! Technical Data: Throughput: Up to 600 briquettes/hour* Main motor: 30 kW Feed motors: 2.6 kW Cooling system: 1.6 kW Total power: 34.2 kW Oil tank: 260 liters Dkjdpfxetmugcj Ab Ssg Filters: 4 Length: 2000 mm Width: 2000 mm Height: 2200 mm Weight: 3500 kg Briquette size: 40–110, D80 mm Warranty: 2 years / 2,000 operating hours