Teleskopinis krautuvas

KRAMER Kramer KT144

Sąlyga: naujas, Gamybos metai: 2023, Standby power output: 20 kVA (16 kW) Full load: 17.5 kVA (14 kW) Voltage: 230/400 V Generator output: 16 kW Continuous generator output: 14 kW Number of phases: 3 ECU calibration Fuel tank capacity: 60 l Liquid cooling Frequency: 50 Hz Speed: 1,500 rpm Engine type: inline engine, 4-cylinder, naturally aspirated Cylinder bore and stroke: 98 x 105 mm Displacement: 3.2 liters Oil capacity: approx. 3 l (between min./max. on dipstick) Coolant capacity: approx. 5 l Fuel: Diesel Compression ratio: 17.2:1 Central control: DATAKOM D300 Insulation class (generator): H Number of windings (generator): 12 IP protection class (generator): IP23 Excitation type: shunt Itedoi Nthqjpfx Af Ieb Alternator voltage regulation: +/- 1% Dimensions (L x W x H): 2,000 x 900 x 1,070 mm Emission standard: EURO III Weight: 730 kg

Sąlyga: naudotas, Gamybos metai: 2016, veikimo valandos: 1 049 h,

Sąlyga: naudotas, Gamybos metai: 2015, veikimo valandos: 2 485 h, mašinos/transporto priemonės numeris: 0300212166, ašių konfigūracija: 4x4, kuro tipas: dyzelinas, Įranga: visų varančiųjų ratų pavara, Pavara: Ratas Tuščias svoris: 10 850 kg Stiebas: Lankstinė strėlė Itedotr Itbopfx Af Isb Kėlimo talpa: 230 kg Darbinis aukštis: 2 050 cm Didžiausias horizontalus pasiekiamumas: 1 210 m Transporto matmenys (I x P x A): 8,55x2,45x2,85 Dėl daugiau informacijos kreipkitės į PFEIFER GROUP.

Sąlyga: naujas, Gamybos metai: 2026, Cut-Off and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, Saw tiltable via handwheel and worm gear (back side) Saw blade diameter: 520 mm, saw blade bore: 50 mm Blade speed: 2800 rpm 400 volts / 5 kW (S6/40%) motor with brake and automatic star-delta switch g Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees (swiveled): 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees tilted: 140 mm Saw can swivel to one side to approx. 25 degrees for acute angles and tilt left up to 30 degrees for flat angles TCT circular saw blade 520x4.0/2.8x50 mm 60 teeth WZ neg. for wood RLH-ST60 6.0 meter measuring length, mounting side: left Length stop / roller conveyor, heavy-duty design, Stop slider adjustable from operator position via handwheel, Isdpsk H Ic Usfx Af Istb electronic-digital measurement display, stop slider pneumatically clamped, flip-away stop flap to the rear, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 m Surcharge for digital electronic display unit Type: FIAMA EP6 for 230 V mains operation, with electrical on/off switch and socket. Powerful dark red LED display. Higher accuracy compared to battery-powered crystal display RO-ST60 4.0 meter infeed roller conveyor Mounting side: right Heavy-duty design, steel rollers: 60 mm diameter, roller spacing: 200 mm, 400 mm roller width, 3 support feet and connection piece Location: Ex stock 54634 Bitburg - immediately available - Image: similar. Machine is still in its original packaging

Sąlyga: naujas, Gamybos metai: 2025, CASADEI PFS 520 - Surface & Thickness Planer with 520 mm Planing Width and Motorized Thickness Table Adjustment Robust Cast Iron and Steel Construction Large, ribbed surfacing tables made from annealed cast iron to prevent warping Smooth, quiet operation due to heavy machine weight Four feed speeds Motorized thickness table adjustment with two speeds and digital display Segmented pressure bars at the infeed Precision-mounted 4-knife cutterblock Helical steel feed roller for particularly uniform and gentle wood infeed Outfeed roller with rubber coating Large adjustable fence, tilting from 90° to 45°, easily readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa Cutterblock Quick knife change in seconds On machine start, the knives are automatically tensioned by centrifugal force – self-locking The knife projection is automatically set without adjustments or screws The surfacing table is adjusted via a robust and precise parallelogram system, ensuring consistent distance between the table lips and cutterblock in all positions The sturdy aluminum fence is anodized as standard, easily adjustable, and provides a large support surface The adjustable tilt from 90° to 45° is easily readable from the workstation Standard with auxiliary fence for safe planing of narrow workpieces Image shows optional equipment The extraction port is always in the same position for both surfacing and thickness planing Thus, no extra hose or cumbersome switching or routing around the machine is required. Technical Data Total length of surfacing tables 2300 mm Infeed table length 1180 mm Planing width 520 mm Fence dimensions 1200 x 190 mm Fence tilt range 90 - 45° Min./max. planing height 3/250 mm Cutterblock diameter/number of knives 100 mm / 4 pcs Feed speeds 5/8/12/18 m/min Cutterblock speed 5000 rpm Motor power 400 V / 50 Hz / S6 Itjdpfx Afsbxz S Hs Iob Extraction port diameter 120 mm Weight 1020 kg Top machine Location: Bitburg – immediately available

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia: 2 500 kg, kėlimo aukštis: 5 850 mm, bendras ilgis: 5 200 mm, · Maximum lateral reach: 3.30 m · Reach at maximum lifting height: 0.50 m · Breakout force with bucket: 4205 daN · Front overhang: 0.99 m · Dump angle: 117° · Tilt angle: 12° · Turning radius (over wheels): 3.31 m · Drive wheels (front / rear): 2 / 2 · Steering wheels (front / rear): 2 / 2 · Lifting time: 7.30 s · Lowering time: 4.95 s · Telescopic extension: 5.20 s · Telescopic retraction: 3.70 s · Tilt-in: 3.20 s · Dump-out: 3.20 s · Engine: Kubota, compliant with emission standard Stage V · Engine model: V3307-CR-T-E5B · Number of cylinders – Cylinder displacement: 4 – 3331 cm³ · Rated engine power / output: 75 Hp / 55.40 kW · Maximum torque / engine speed: 265 Nm @ 1400 rpm · Tractive force: 3240 daN · Reversible fan: standard · Engine cooling system: 2 water radiators + hydraulic oil cooler · Transmission type: hydrostatic · Number of speeds (forward / reverse): 2 / 2 · Maximum travel speed (may vary according to regulations): 25 km/h · Differential lock: front axle locking differential · Parking brake: automatic negative parking brake · Service brake: oil-immersed multi-disc brakes on front axles · Pump type: gear pump · Hydraulic flow rate – hydraulic pressure: 86 l/min – 235 bar · Fuel tank capacity: 63 l · Sound level (LpA) according to NF EN 12053: 76 dB · Environmental noise (LwA): 104 dB · Hand-arm vibration exposure: < 2.50 m/s² · Safety cab certification: ROPS/FOPS Level 1 cab · Controls: JSM Ijdpfxsxd Hwns Af Iotb

Sąlyga: naudotas, rida: 19 950 km, pirmoji registracija: 11/1989, kuro tipas: dyzelinas, ašių konfigūracija: 4x4, pavaros tipas: mechaninis, Gamybos metai: 1989, Įranga: visų varančiųjų ratų pavara,

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, keliamoji galia: 2 600 kg, kėlimo aukštis: 5 730 mm, kuro tipas: dyzelinas, stiebo tipas: simpleksas, pavaros tipas: Diesel, Rigid telehandler Mast type: Standard Itedpfxjw Eqcte Af Ieb Condition: New machine Technical condition: New Front tire type: Pneumatic Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire condition: 80 - 100% Description: MINI AGRI 26.6 STAGE V TÜV/DEKRA approval 20 KM/H Standard steering axles, hydraulic single-lever control with proportional and simultaneous operation (flow-sharing). Closed-center system including pressure relief kit for hydraulic couplings. Compatible with lifting equipment and winches. (Joystick with deadman switch sensor) Air suspension seat, air conditioning, wheel set #12.0/75-18 with fenders, EURO carrier plate with quick-change system for attachments, hydraulically controlled from the cab, steering indicator light, radio pre-installation with speakers and antenna, work lights on cab, two rear swiveling LED work lights on cab, additional external glove compartment, boom vibration damping. 3rd valve, 4th valve, rear work lights, front work lights, heating, full cab, CE certificate, with Weidemann attachment.

Sąlyga: naudotas, galia: 74 kW (100,61 AG), pavaros tipas: hidrostatinis, kuro tipas: dyzelinas, kėlimo aukštis: 9 000 mm, Gamybos metai: 2014, veikimo valandos: 6 223 h, Savo svoris: 7 980 kg Variklio markė: Deutz Kėlimo galia: 3 200 kg Serijos numeris: 941017 Iodpfxjtr Iqcj Af Ietb Priekinių padangų būklė: 80% Galinės padangos būklė: 80% Transportavimo matmenys (I x P x A): 4,7x2,34x2,3 m Daugiau informacijos teiraukitės PFEIFER GROUP.

Sąlyga: geras (naudotas), The debarker is ideally suited for debarking both hardwood and softwood logs. Carriage made of heavy-duty steel construction 5 pairs of drive wheels Milling arm made from heavy-duty steel construction Hydraulic milling head 22 kW motor The log feeder shown in the photos is not included in the offer and is available at an additional cost of 25,000 PLN / 5,500 EUR. Iodpfx Ajtuyr Ijf Ijtb