Vielos tempimo mašina

KOCH KHZ 5000

Sąlyga: visiškai atnaujintas (naudotas), SCHLATTER MG24 Welded Mesh Production Line Completely Refurbished WORKING RANGE Panel width: max. 2,500 mm Weft wire length: min. 900 mm Weft wire length with QF5 distributor: min. 300 – 1,600 mm Maximum spacing between outer warp wires: 2,400 mm Mesh length (warp wire length): max. 2,500 – 6,000 mm Minimum spacing between warp wires: 100 mm Spacing between weft wires: 25 – 250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 – 12.0 mm Weft wire diameter: 4.0 – 12.0 mm Number of warp wires: max. 24 MG 24.1/8C MESH WELDING MACHINE, Standard Equipment Includes: - 1 Machine base frame - 1 Upper support for press reception, continuously adjustable via handwheel - 1 Magnet holders with holding magnets and monitoring of weft wires - 1 Row of pneumatic solenoid valves for press actuation - 1 Air and water system - 2 Pneumatic rotary drives with oil damping - Static torque with 5 bar compressed air: 480 Nm - Continuously adjustable front from 25 – 250 mm, adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION Includes: - 8 C-type transformers - Rated power per transformer: 100 kVA - Secondary open-circuit voltage: 7.1 V - Secondary rated current: 14 kA - 8 ES 130 thyristor contactors - 12 Welding presses: 5.0 kN - 12 Warp wire current bridges for 50–100 mm warp wire spacing - 12 Warp wire current bridges for 100 mm stepped warp wire spacing - 10 Warp wire current bridges for 100–150 mm warp wire spacing - 8 Warp wire current bridges for 150 mm stepped warp wire spacing - 6 Warp wire current bridges for 150–200 mm warp wire spacing - 6 Warp wire current bridges for 200 mm stepped warp wire spacing - 24 Lower copper electrode holders with standard angular electrodes, each with a water-cooled current cable, width: 58 mm - 24 Wire holding clamps Kodpfxewu Tu Dj Abrjwu Panel width: max. 2,500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 – 1,600 mm Spacing between extreme warp wires: max. 2,400 mm Mesh length (warp wire length): max. 2,500 – 6,000 mm Spacing between warp wires: min. 100 mm Weft wire spacing: 25–250 mm Warp wire diameter: 4.0 – 12.0 mm Weft wire diameter: 4.0 – 12.0 mm Number of warp wires: max. 24

Gamybos metai: 2021, Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3815407, WEIGHT 8000 KG FEM ISO 1Am M4 KW 2.4/15.5 (50 Hz) Kwedpfx Ajt Nhqysbrsu MAXIMUM CAPACITY 16 TON

Gamybos metai: 2006, Sąlyga: naudotas, Ultrasonic and Electrolytic Cleaning, Wire Cleaning Line, Wire Cleaning System, Wire Treatment Plant Kwodpfof Nku Rjx Abrju Manufacturer: Sirio-Wire Model: M0209 Number of Wires/Strands: 12 (6+6) Wire Diameter: 1.0 – 5.5 mm; however, thicker wires have also been processed with this system and the achieved cleaning results were very satisfactory. Year of Manufacture: 2006 The system was only in operation for about three years, after which production was relocated to another site. Process: Ultrasonic and Electrolytic Cleaning in a Hot Bath A detailed process description can be found on the manufacturer's website siriowire under "Ultrasonic and Electrolytic Cleaning". The system is in good, operational condition and is complete except for the pumps. The operator catwalk and the drip tray on which the system is mounted are missing in the photos; these will be added soon. The last three photos show systems of this type in operation.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2018, Sumuštinių plokščių linija, stogas 30,50,80,100 mm, siena 50,80 mm, fasadas 50,100 mm Kwedpfx Aexcinasbreu

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, For optimal recovery of non-ferrous metals or material purification This extremely powerful machine is mainly used for processing municipal waste, shredder materials, household appliances, wood, plastics, glass, IBA and bed ash, as well as electronic waste. This IMRO non-ferrous metal separator meets the highest requirements for recovery rates and purity levels. Kwjdpovdqdiofx Abrsu

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Technische Daten: Baujahr: 2004 Maximale Maschenbreite: 2200 mm Maschendichte: 20 Schweißköpfe in beliebiger Anordnung (40 Köpfe möglich) Kwedpfx Aboryv Siorju Abstand (Inkrement): 20 mm bis 200 mm Drahtstärke: 1,6 mm – 3,0 mm (max. 550 N/mm²) Energiebedarf: 8 kW Gewicht: ca. 10 t Antrieb: Digitaler Servoantrieb, Steuerung (SPS), stufenlose Regelung Zubehör: Handbuch

Gamybos metai: 2019, Sąlyga: beveik kaip naujas (naudotas), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - As new: barely used - Documentation available (both electronic and hard copy) - Pallet with spare parts included TECHNICAL DATA Model: RWO 360/400-1150 Maximum furnace temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C under vacuum Kwjdeiryyaepfx Abrju Control accuracy: ± 2 K Temperature uniformity: ± 6 K in the range from 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace workspace: 360 x 400 mm Loading capacity: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Ultimate vacuum (cold, clean, dry furnace): < 5 x 10-5 mbar Footprint: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We do not accept any liability for the accuracy, completeness, or up-to-dateness of the information provided.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, The machine has very few operating hours and has been in storage for many years. Specifications: - Hole diameter and thickness up to max.: approx. 28×13 mm Kwedpfxeupzf Ro Abrju - Angle iron 90 degrees up to max.: 80x80x8 mm - Angle 100x100x10 mm - Flat steel up to max.: 300x10 / 200x13 mm (See also the specification plate in the attachment.) Machine weight: approx. 750 kg Various punches are also included with the machine.

Gamybos metai: 1998, Sąlyga: beveik kaip naujas (parodų įrenginys), Vollständig überholte Drahtbehandlungs- und Reinigungsanlage mit chemischer Behandlung – alle Teile NEU, außer dem Grundgestell. Kwjdpfx Abjfhw Uysrou Für weitere Informationen kontaktieren Sie uns bitte. Vielen Dank!

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: D20E/7694, Pasiūlymo numeris: D20E/7694 Mašinos tipas: Daugiavietė sausos vielos tempimo mašina Gamintojas: SKET / MILL Kwjdpfx Abswi S Ixerju Tipas: 8 BLOKAI Pagaminimo metai: Įėjimo skersmuo: 6,5 mm Galutinis skersmuo: 1,6 mm Tempimų skaičius: 8 Diskų skersmuo: 550 mm ir 650 mm Greitis - metrai/sek.: 8-12 Vieta: Europoje