Konvencinė tekinimo staklė - V-Turn 410/1500

Knuth V-Turn 410/1500

Sąlyga: naudotas, Gamybos metai: 1975, Technical Details: Swing over bed: 500 mm Swing over cross slide: 260 mm Turning length: 950 mm Centre height measured in bed: 220 mm Distance between centres: 1000 mm Spindle speeds: 11.2 - 2240 rpm / 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 - 1.6 mm/rev – 32 steps Cross feeds: 0.02 - 0.71 mm/rev – 32 steps Total power requirement: 11 kW Machine weight approx.: n/a t Machine dimensions approx. LxWxH: 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle run), available free in Leipzig. Top slide rotatable 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for 2000 rpm. Thread cutting: metric, module, inch threads Bsdpfx Aov A Sqhodmjdk Chip protection wall Chuck guard (mechanical) MULTIFIX toolpost with boring bar holder Ø 40 mm Chip collection tray Coolant supply with pump Lead screw protection Machine feet CE safety pre-installed

Sąlyga: naujas, Gamybos metai: 2024, 10-ton container rotator Dual synchronized drive Continuously adjustable axle spacing via threaded spindle Continuously variable speed control With foot remote control Suitable for diameters from 300 mm to 3,500 mm Roller width and diameter: 120 x 270 mm Bedpfxjifk Rbs Admodk Speed range: 200 - 1,200 mm/min.

Sąlyga: naujas, Bernardo Lead and Feed Screw Lathe Master 180 including 3-axis digital readout Centre Distance: 1000 mm Centre Height: 180 mm Swing Over Bed: 360 mm Swing Over Gap*: 480 mm Swing Over Cross Slide: 220 mm Bed Width: 185 mm Spindle Bore: 51 mm Spindle Mount: DIN 55029, D1-5 Spindle Speed Range: (8) 70 – 2000 rpm Longitudinal Feed Range: (32) 0.052 – 1.392 mm/rev Cross Feed Range: (32) 0.014 – 0.380 mm/rev Metric Threads: (26) 0.4 – 7.0 mm Inch Threads: (34) 4 – 56 TPI Tailstock Quill Diameter: 42 mm Tailstock Quill Travel: 110 mm Tailstock Taper: MT 4 Motor Output S1 100%: 1.5 kW (400 V) Motor Input S6 40%: 2.2 kW (400 V) Machine Dimensions (W x D x H): 1920 x 750 x 1600 mm Approximate Weight: 540 kg * Removable gap length: 225 mm Scope of Delivery: • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-200 mm / D5 • Face plate 200 mm / D5, per DIN 55029 • Fixed steady rest – max. passage diameter 70 mm Bdedpfx Adsd Du Tiemjk • Travelling steady rest – max. passage diameter 50 mm • Coolant system • Initial fill with Shell Tellus 46 • Pull-out chip tray • Clamping plate 320 mm • Four-way tool post • Safety guard for four-way tool post • Safety slip clutch • Micrometric longitudinal stop • Thread chasing dial • LED machine lamp • Reducing sleeve • Change gears • 2 centre points • Foot pedal with brake function (CE compliant) • Motor with electromagnetic brake (CE standard) • Machine stand

Sąlyga: naudotas, Swing over bed: 250 mm Swing over cross slide: . mm Centre distance: approx. 400 mm Centre height: approx. 125 mm Speed range: 80 - 3000 rpm Number of speed steps: 18 Spindle bore: 24 mm Tailstock quill taper: MT 3 Weight: approx. 400 kg Dimensions: approx. 1200 x 650 x 1300 mm Four-jaw chuck diameter: 125 mm Including Röhm four-jaw chuck, Ø 125 mm, including hard and soft jaws; Bdsdpfxewa Dz Eo Admek Collet chuck system including collets 1-20 mm with 1 mm increments; Multifix size A with 3 tool holders; Chuck guard with interlock.

Sąlyga: geras (naudotas), Gamybos metai: 2010, Centre Lathe Manufacturer: JET Type: GHB-1330 Year: 2010 Equipped with 3-axis digital readout, 3-jaw chuck Ø 160 mm, Multifix toolholder size A, 2 steadies, and coolant system. Swing over bed: 330 mm Bdedpfxsqwgzqe Admjk Swing over cross slide: 197 mm Centre distance: 750 mm Spindle speeds: 70–2000 rpm Spindle bore: 38 mm Machine in good condition, from a training workshop. Machine documentation available.

Sąlyga: naujas, New lathe with large spindle bore. Brand: KMS Model: CS6250C Centre distance: 1000 mm Swing over bed: Ø 500 mm Swing over cross slide: Ø 300 mm Swing in gap: Ø 710 mm Turning length in gap: 240 mm Bed width: 390 mm Spindle bore diameter: Ø 105 mm Spindle speeds: 12 steps (36 - 1600 rpm) Tailstock quill diameter: 75 mm Tailstock travel: 150 mm Tailstock taper: MT 5 Machine dimensions: approx. 2630 x 975 x 1270 mm (L x W x H) Machine weight: approx. 2100 kg Machine equipped with: - Longitudinal and cross feed - Rapid traverse for longitudinal and cross feed - Movable and adjustable stops for automatic longitudinal feed - Leadscrew for threading (Metric/Inch/Module/DP threads possible) - Quick-change toolpost, Multifix type - 2-axis digital readout (Brand: Sino) - 3-jaw chuck Ø 315 mm, 100 mm bore (Camlock) - 4-jaw chuck Ø 400 mm, 105 mm bore (Camlock) - Faceplate Ø 630 mm (Camlock) - Fixed steady rest Ø 120–260 mm Bedpfx Adehhm Edjmsdk - Follow rest Ø 20–80 mm - Coolant system.

Sąlyga: labai geros būklės (naudotas), Four-jaw chuck, make Roto Record Model DHK 315 x 4 Bdjdpfxjg Rxh Io Admok Short taper size 8 Taper diameter 139.735 mm Bolt circle diameter 171.4 mm Diameter 315 mm Jaws individually adjustable

Gamybos metai: 2022, Sąlyga: naujas, Technical data: - Load capacity: 10,000 kg - Dead weight: 850 kg Bdsdpfxofxw H Ae Admsk - Workpiece diameter (insertable): 50 - 3,500 mm - Roller diameter: 250 mm - Roller width: 160 mm - Rotational speed: approx. 100–2,000 mm/min - Two-pedal foot switch - Potentiometer for stepless speed control

Sąlyga: geras (naudotas), Gamybos metai: 1977, Pressure: 250 t Distance between uprights: 1120 mm Stroke: 250 mm Distance table/ram, max. upper stroke, max. upper adjustment: 500 mm Table surface: 1100 x 900 mm Table height above floor: 950 mm Lateral pass-through between uprights: 700 mm Ram surface: 1100 x 900 mm Downward speed: mm/s Upward speed: mm/s Working speed: mm/s Oil capacity: 730 l Drive power: 56 kW Weight: 25 t Bdjdpfxjx Ug Do Admjk Space requirements (W x D x H): 2.3 x 1.55 x 3.96 m Additional information: with electrohydraulic drive, hydraulic (20) and electric control system as per UVV, light barrier (Sick), upper and lower stroke limitation, pressure- and position-dependent control, cutting stroke damping, short-stroke control, new control system (Mitsubishi), safety control (PNOZ Multi), screen control with touchscreen, control cabinet

Sąlyga: geras (naudotas), Sunki tekinimo staklės, tekinimo staklės, tekinimo suolas, kreipiančiosios ir traukiančiosios suktuvo tekinimo staklės, kreipiančiosios ir traukiančiosios suktuvo tekinimo suolas -Gamintojas: Meuser, kreipiančiosios ir traukiančiosios suktuvo tekinimo staklės, tipas M-IV-S -Staklių lova: grūdinta -Tekinimo ilgis: 3800 mm Bdedpfxjwrfkfj Admok -Tekinimo Ø virš lovos: 720 mm -Tekinimo Ø virš atramos: 440 mm -Veleno skylė: Ø 95 mm -Veleno sūkių dažnis: 22,4 - 1000 aps./min -Klavišinės strypo griebtuvas: Forkardt Ø 400 mm -Galinis stovas: MK6 -Pavaros galia: 18 kW -Priklauso: 1x luneta, Multifix įrankių laikiklis, įrankiai kaip nuotraukose -Matmenys: 5930/1650/H1600 mm -Svoris: 7500 kg