Juostinis metalo šlifuoklis mobilus

KMU MFBS 75

Sąlyga: geras (naudotas), Gamybos metai: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid radial drilling machine - Clamping table: 400 x 1100 mm - Arm reach: 930 mm Fpsdpfx Asirax Usbmor - Taper: MT4 - Motor power: 1.35/1.8 kW - Spindle speeds: 41-1700 rpm - Column diameter: Ø 200 mm - Spindle stroke: 125 mm - Thread cutting device: YES - Feed: 0.075 - 0.3 mm/rev - Dimensions: 1800/1235/H2240 mm - Weight: 1500 kg

Gamybos metai: 1960, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and center of gravity offset 300 mm: 10 t Load capacity with vertical faceplate position and center of gravity offset 830 mm: 5.5 t Faceplate dimensions: 1500 x 1500 mm Fjdpscblc Sjfx Abmspr Faceplate speed, hydraulically steplessly adjustable: 0.025 - 0.75 rpm Swivel range: 0 - 135° Swivel time for full swivel range up: 140 s Swivel time for full swivel range down: 120 s Hydraulic drive: 380 V Height of swivel axis above floor level: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3.5 t Counterweight weight: 2.3 t

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, Löser centerless tube grinding machine - belt grinding machine - centerless tube polishing machine - cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and was completely overhauled in 2012. During the overhaul, it was converted for polishing and has since only polished approx. 10,000 parts. After that, the machine was no longer in use. During the general overhaul, the motors, bearings, and the entire electrical cabinet with frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. A wastewater treatment system including pumps is currently not available. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Fjdspugwiepfx Abmjpr The machine is suitable for tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power output of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, 300 kg load capacity welding positioner, with 125 mm hollow shaft diameter with 320 mm or 400 mm chuck very robust design Infinitely variable speed control from 0.15 to 5.0 rpm Current transmission up to 350 A Turntable diameter 400 mm Tilting up to 135° Height (horizontal) 835 mm, tilted to center approx. 735 mm Length 850 mm x width 580 mm Fpodpfx Abjlamtbomor

Gamybos metai: 2004, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 0441057, Offer 23300 Technical Specifications: - Belt dimensions: 75 x 2000 mm - Surface grinding opening: 75 x 300 mm - Support vice – angle adjustable: 90° to 30° - Belt speed: 15 + 30 m/sec - Possible contact wheel diameters: Ø 20 – 76 mm Fjdpfxopug D Eo Abmepr - Contact wheel length: 75 mm - Drive: 400 V / 2.2 / 3 kW - Drive speeds: 1440 / 2880 rpm - 1 piece contact wheel: 48 mm - Required space approx.: W 800 x H approx. 1000 x D 1300 mm - Weight approx.: 250 kg

Sąlyga: beveik kaip naujas (parodų įrenginys), A demonstration belt grinder WIEGAND with two belt speeds, ideal for steel and stainless steel Belt dimensions: 2000 x 150 mm Belt speed: 18 / 37 m/sec Power: 2.2 / 3.8 kW 400V/50Hz Weight: 110 kg Technical data and dimensions: subject to change/errors excepted Fpsdpepgmufsfx Abmor

Gamybos metai: 1990, Sąlyga: naudotas, mašinos/transporto priemonės numeris: xxxx; Lg-Nr. 17250, Technical data: - Load capacity approx. 200 kg - Outreach 800 mm - Working height in horizontal position approx. 1000 mm - Jib arm motorized, rotatable left and right - Jib arm manually tiltable - Faceplate motorized, rotatable left and right - Faceplate speed infinitely variable - Faceplate diameter 300 mm Fpedpfxodd Ilxe Abmsr - Swiveling control panel with ESAB controls, - Type 6 PTF, year of manufacture 1997 - Space requirements approx. W 1100 x H 1300 x D 1600 mm - Weight approx. 300 kg

Gamybos metai: 2015, Sąlyga: naudotas, Rotator for containers, welding table, welding positioner, roller stand 1000 kg load capacity With foot remote control Continuously variable speed adjustment from 80 to 1600 mm/min Fedpsc Ny H Aefx Abmepr For diameters from 20 mm to 700 mm

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, Löser centerless tube grinding machine - belt grinding machine - centerless tube polishing machine - cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and was completely overhauled in 2012. During the overhaul, it was converted for polishing and has since only polished approx. 10,000 parts. After that, the machine was no longer in use. During the general overhaul, the motors, bearings, and the entire electrical cabinet with frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. A wastewater treatment system including pumps is currently not available. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine is suitable for tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power output of 7.5 kW per station. Fjdpfx Abetmqi Domjpr The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Sąlyga: geras (naudotas), Gamybos metai: 1999, Lakšto plotis 2040 mm Lakšto storis 3 mm Viršutinės spaudimo sijos atsidarymo plotis 350 mm Maksimalus lankstymo kampas 0-135° Apatinės ir lankstymo sijos reguliavimas 80 mm Valdymas Fastimatic M200 Variklio galia 2,2/1,5 kW Įrenginio svoris apie 2460 kg Užimamas plotas apie 3,2 x 2,8 x 2,1 m Fpsdpfjvgnm Hjx Abmer Varikliu valdoma lankstymo staklė su motorizuotu lankstymo sijos reguliavimu lakšto storiui nustatyti, ekraninis valdymas Fastimatic M200 (DELEM FM 200 B) viršutinės spaudimo sijos eigos, lankstymo kampo ir galinio atrama (iki 30 programinių žingsnių) nustatymui, avarinio stabdymo jungiklis su magnetiniu laikikliu, galinė atarama su rutuliniu sriegiaračiu, CE ženklinimas. Lankstymo galimybės nurodytos lakštui, kurio stipris 400 N/mm². Dėl didesnio stiprio nerūdijančiam plienui galimybės mažėja. Mažai naudotas įrenginys, labai geros būklės – originali dažų danga! Tai yra naudota įranga, todėl parduodama be jokių garantijų. SANDĖLIUOJANTIS PREKYBININKAS SU 1600 m² PARODŲ SALE.