Dažymo apdailos sistema

KLÖPPER PRE-HEATING furnace

Sąlyga: naujas, TECHNICAL DATA Hedpfx Agog Dgymoiji Type: gas-fired pass-through chamber furnace Internal dimensions (W x H x D): 2200 x 2350 x 3000 mm Number of control zones: 2 Maximum charge weight: approx. 2.5 t Control system: Siemens S7

Gamybos metai: 2019, Sąlyga: beveik kaip naujas (naudotas), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - As new: barely used - Documentation available (both electronic and hard copy) - Pallet with spare parts included TECHNICAL DATA Model: RWO 360/400-1150 Maximum furnace temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C under vacuum Hodpfxeiryyae Agioi Control accuracy: ± 2 K Temperature uniformity: ± 6 K in the range from 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace workspace: 360 x 400 mm Loading capacity: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Ultimate vacuum (cold, clean, dry furnace): < 5 x 10-5 mbar Footprint: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We do not accept any liability for the accuracy, completeness, or up-to-dateness of the information provided.

Sąlyga: geras (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 4 000 mm, vidinis ilgis: 6 500 mm, vidinis plotis: 1 500 mm, vidinis aukštis: 2 200 mm, ruošinio aukštis (maks.): 2 200 mm, ruošinio ilgis (maks.): 6 500 mm, Įranga: kabina, Powder coating system for workpieces with dimensions L6500mm x W1500mm x H2200mm. Hjdpovdlfzefx Agiei Original price approx. €800,000.

Sąlyga: geras (naudotas), Gamybos metai: 2015, veikimo valandos: 7 800 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: TEK05/2015, įvesties srovės tipas: trifazis, plieno lakšto storis (maks.): 1 mm, maks. lakšto storis: 1 mm, bendras plotis: 840 mm, bendras ilgis: 15 000 mm, bendras aukštis: 153 mm, padavimo ilgis X ašis: 46 000 mm, padavimo eiga Y ašimi: 2 000 mm, įėjimo įtampa: 380 V, darbinis plotis: 2 000 mm, padavimo plotis: 1 500 mm, valdymo spintos ilgis: 1 500 mm, valdymo spintos aukštis: 1 000 mm, valdymo spintos plotis: 800 mm, X ašies padavimo greitis: 700 m/min, ruošinio svoris (maks.): 163 kg, produkto aukštis (maks.): 1 mm, įėjimo srovė: 380 A, galia: 150 kW (203,94 AG), ritės svoris: 10 000 kg, HOCHRIPPEN-BLECH-PROFILIERANLAGE (Trapezblech mit Profilhöhen 53/85/135/153 mm) Profiltypen: H53 mm / H83 mm / H135 mm / H153 mm Blechdicke: 0,75 mm - 1,25 mm Min. - Max. Profillänge: 1.500 mm - 15.000 mm Hersteller: TEK MAK Baujahr: 2015 Zustand: Walzen für die Profilierung von 53, 85 und 135 mm in sehr gutem Zustand; Walzen für die Profilierung des 153-mm-Profils in gutem Zustand. Anlagenkomponenten: - Hydraulischer Abwickler, 10 t Kapazität - Profilieranlage - Mobile Guillotine Hodpfeuannxex Agiji - Abstapeltisch - Steuerungs- und Bedienpulte

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, nominali šilumos galia: 930 kW (1 264,45 AG), temperatūra: 1 000 °C, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, garantijos trukmė: 12 mėnesiai, Įranga: dokumentacija / vadovas, Dujinis arba suskystintomis dujomis (LPG) kūrenama vežimėlinė kamera krosnis modelis ST/BT, skirta geležies lydinių, tokių kaip ketus ar plienas, termiškai apdoroti iki 1000°C temperatūros. Komplektuojama su 1 ištraukiamu vežimėliu ir automatine valdymo bei kontrolės skydine. Krosnis tinkama grūdinimui, atleidimui, normalizavimui, atkaitinimui, įtampos mažinimui, įkaitinimui ir kt. CE sertifikato deklaracija 12 mėnesių garantija Hedpfx Agow Ifl Tsiji Naujas įrenginys, pagamintas Italijoje Charakteristikos ir pridėtose nuotraukose pateikta informacija yra orientacinio pobūdžio, krosnys gali būti gaminamos pagal individualius užsakymus, pritaikytos konkretiems termoprocesams.

Sąlyga: naujas, Gamybos metai: 2026, Rehnen Spray Table Lacky Advantages: Thanks to its 360° rotatable arms, it always provides optimal support and a stable surface for all workpieces. Easily adjustable in height and 360° rotatable for fast, efficient working. Due to its protective covers, the arms remain movable even after intensive use. Hsdpfx Aslrrrmsgisi Height (mm): 950–1250 Width (mm): 600–1120 Length (mm): 700–1260 Diagonal (mm): 900–1680 Load capacity (kg): 100 Location: available immediately from stock.

Gamybos metai: 2012, Sąlyga: naudotas, Technical Details: Maximum temperature: 700°C – Typical operating temperature: 400–650°C Opening dimensions (W x D x H): approx. 2200 x 3800 x 1100 mm Programmable control: Siemens S7/300 IM 151-7 Interface: Ethernet Chamber volume: Furnace volume: 9.2 m³ Control voltage: 24 / 230 V Current type: 1P/PEN; 50 Hz Rated voltage: 400 V Electrical heating power: 3 x 3 x 21 kW = 189 kW Airflow rate: 3 x approx. 9,000 = 27,000 m³/h Approx. machine weight: 8.0 t Approx. machine dimensions (HxWxD): approx. 3.9 x 3.8 x 4.8 m Control cabinet dimensions: approx. W: 2,400 x D: 400 x H: 2,000 mm Transport dimensions (LxWxH): approx. 5.2 x 3.6 x 2.9 m Electrically Heated Recirculating Furnace Electric annealing furnace with a housing made from profiled steel sheet, lined with lightweight refractory bricks/fireclay bricks. Applications/Processes: Primarily for annealing of low and high-alloy hollow cylinders (e.g., alloyed grey cast iron). Usual load weight 5,000 kg, max. 8,000 kg The parts are placed directly crosswise on the bogie hearth/grate into the airflow device (height above floor approx. 750 mm without grate) Heating integrated into the furnace ceiling Recirculation fans (3 compact fans) mounted on the furnace side wall, 3 x 4.0 kW = 12.0 kW Forced cooling (1 cooling air fan) Programmable control with 25 programs, each with up to 50 segments Furnace door/vertical lift door with SWE geared motor approx. 2.2 kW (frequency-controlled) Bogie hearth drive approx. 3.0 kW SEW geared motor (frequency-controlled) Incl. center rail (drag chain) Hedpsu R Dhxsfx Agisi Used, in good condition *

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, HEAT TREATMENT FACILITY WITH SCADA CONTROL SYSTEM - AKF1 İPSEN TQF 4 EM, 1977 model, atmosphere-controlled chamber furnace (1 unit) - AKF2 İPSEN TQFRA 5 EM, 1991 model, atmosphere-controlled chamber furnace (1 unit) - AKF3 İPSEN T4 EM, 1972 model, atmosphere-controlled chamber furnace (1 unit) - AKF4 İPSEN TU-5 EM, 1970 model, atmosphere-controlled chamber furnace (1 unit) - HSH, 2011 model, high-temperature stress relieving, bright annealing furnace (1 unit) - IPSEN DAC 5 ER, 2011 model, nitriding furnace and high-temperature stress relieving (1 unit) - IPSEN DAC 4, 1980 model, high-temperature stress relieving, bright annealing furnace (1 unit) - HSH, 2007 model, high-temperature stress relieving, bright annealing furnace (1 unit) - BOREL, 1987 model, pit-type stress relieving furnace (1 unit) - Ipsen, 1972 model, stress relieving furnace (2 units) - Loading car (1 unit) - Unloading car (1 unit) Hjdpfxjwgmp Ss Agisi Note: Item names and technical terms are translated with industry-standard wording for industrial machinery and heat treatment equipment, suitable for professional sales platforms.

Sąlyga: naujas, Gamybos metai: 2026, Technical data: Control system: Multi-axis real-time interpolator with active trajectory prediction, LAN and EtherCat communication, 2ms sampling time, optional RTCP tool tip tracking, correction map Working area: X 600-3000mm / Y 900-12000mm Gantry clearance and Z-axis range: 100-1000mm Drive system: Omron servo drives with EtherCat protocol, X and Y axes with hardened, ground helical racks (accuracy class 6), Z axis ball screw (accuracy class 5) Linear bearings: Trapezoidal rails, Bosch Rexroth 25 Travel speed: Up to 120 m/min Acceleration: Up to 1G Software resolution: Up to 0.0001mm Positioning accuracy: 0.01mm Gantry drive: Dual-sided master/slave with gantry angle correction Electrospindles: Up to 36 kW, inverter driven Tool taper: ISO30 or HSK63 ER32 Max spindle speed: 24,000 rpm (options: 6,000, 40,000, 50,000) Construction: Steel welded, ribbed, stress-relieved, precision machined Equipment options: - Material positioning and correction via camera, laser, or probe - Linear or turret tool magazine - Tool cooling by mist or chilled air - 3D laser or contact scanner - Positioning bases - Additional angular/rotary axes Hedpfx Aon Hq Huegioi - Drilling and angle aggregates - Active oscillating, rotary, drag, creasing, or plotter knives - Pneumatic clamping fixtures - Chip extraction system - Industrial robot integration Table type: T-slot: aluminium profiles, solid aluminium, solid steel; vacuum; hybrid; pneumatic clamping fixtures #router #CNC #millingmachine #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #particleboard #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell #BLUM

Sąlyga: naudotas, Gamybos metai: 2008, - Manufacturer: Printworld - Model: PUVD 1600-2 - Year of manufacture: 2008 - Working width: 1,600 mm - Working height: 1,030–1,050 mm Hsdpeumvkcofx Agisi - Max. workpiece height: 25 mm - Operating side: left - Number of top lamps: 2 pcs. - Suitable for mercury lamps - Suitable for gallium lamps - Lamp output: 120 W/cm - Step control: 60 / 90 / 120 W/cm - Mesh conveyor belt - Feed speed adjustable: 2–50 m/min - Installation length: 3,300 mm - Machine dimensions (L x W x H) in meters: 3.3 x 2.5 x 1.8 m - Location: in stock - Voltage, frequency: 400 V / 50 Hz