KIERSERLING tiesinimo ir poliravimo staklės strypams WRPT2

KIESERLING Bar straightener / Polishing WRPT2

Būklė: geras (naudotas), Distance between centres: 1000 mm Centre height: 175 mm Grinding length: 500 mm Max. grinding diameter: 300 mm Grinding wheel dimensions (OD x ID x width): Ø500 x Ø203 x 80/100 mm Internal taper: Morse 5 Grinding wheel motor power: 7.5 kW Total power: 17 kW Longitudinal carriage travel (X-axis): 267 mm Cross carriage travel (Z-axis): 650 mm CNC brand: FANUC CNC model: 16-T Swivel range: +/- 8.5° Djdpfxott Rawe Ac Djur Dimensions: 2600 mm x 2300 mm x 2100 mm Approx. weight: 4200 kg

Būklė: naudotas, Gamybos metai: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: mm Workpiece height: 60 mm Total power requirement: 50 kW Machine weight approx.: 7,000 kg Space requirement approx.: m DISKUS Vertical double-sided surface grinding machine in C-frame design with rotary table workpiece feed Model: DDS 600 CRA Year of construction: 1969 Serial no.: 6672 Dsdpfot Hw N Hox Ac Djur --- Grinding wheels - diameter x bore per side: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc outside Ø: 810 mm Workpiece: Max. grinding height x grinding width: approx. 60 x 120 mm Vertical quill adjustment per side: approx. 150 mm Hydraulic infeed pulses for depth feed: 0.0025 - 0.05 mm Outer diameter of transport disc: approx. 810 mm Rotary table feed rate steplessly adjustable: 14 – 145 mm/s Grinding wheel speed per side: (24 m/s) / 765 rpm Grinding spindle drive per side: 22 kW each Total drive: approx. 50 kW/380 V/50 Hz Total weight: approx. 7,000 kg Accessories / Special Equipment: • Workpiece rotary device for round transport discs with apertures for inserting the parts and with automatic ejection of finished parts down a chute into a transport box. • IONIC measuring control no. 9 So with measuring probe for finished workpiece height and, if necessary, with automatic hydraulic grinding wheel infeed. • Stepless speed regulation of the rotary device according to grinding dimensions and workpiece. • Manual infeed of grinding wheels via corresponding buttons. • hydraulically swivelling dressing device (RA) between both grinding wheels for simultaneous dressing of both grinding wheels with appropriate compensation and with automatic repositioning to effective workpiece thickness after dressing = high time savings, can be triggered manually or by timer. • Ammeter displays for both grinding spindle drives. * Central lubrication, • Mechanical height control of workpieces with machine shutdown if overheight is detected. • Free-standing control cabinet, separate hydraulic unit, separate large band filter unit, various grinding wheels, various transport discs, etc. This machine is especially suitable for simultaneous, plane-parallel grinding of workpieces in large series. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – soon available for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Būklė: geras (naudotas), Gamybos metai: 1970, For sale: Hilgeland model CH5AL header The machine is in perfect technical condition. Dedpfx Aceu Szucs Deur Machine weight: approx. 20 tons The header is equipped with a comprehensive set of accessories. Loading provided. Maximum diameter of normalized bolt: 16 mm Maximum length: 200 mm

Gamybos metai: 1992, būklė: naudotas, Grinding height 50 mm Grinding width 120 mm Grinding wheel diameter 600 mm Total power requirement 85 kW Machine weight approx. 9,500 kg D I S K U S CNC-controlled, vertical double-sided surface grinding machine with rotating workpiece feed and IONIC measuring control. Type: DDS 600 III PRM - CNC Year of manufacture: 1992 # 7924 _____ Grinding wheel dimensions (each): 600 x 150 x 75 high mm Workpiece data: Grinding height: approx. 1.5 – 50 mm Grinding width: approx. 20 – 120 mm Vertical slide adjustment, each: approx. 150 mm Grinding wheel infeed via CNC: 0.0001 mm Workpiece transport device feed continuously adjustable: 40 - 235 mm/sec. Grinding wheel speed (30 m/s): 191–955 rpm Grinding spindle drive, infinitely variable (per spindle): 37 kW Total drive approx. 85 kW / 380 V / 50 Hz Weight approx. 9,500 kg Accessories / Special Equipment • SIEMENS CNC control SINUMERIK 810 G with monitor, for 4 axes (top and bottom infeed, dresser, and workpiece table rotation), direct input of all grinding data, and in conjunction with • IONIC measuring control no. 17 A with 2 measuring probes for scanning workpieces after the grinding cycle, triggers corresponding infeed of the grinding wheels, continuous measurement data displayed on the monitor for statistics, workpiece counting, etc. • Digital display of power (amperes) for the drive motors and the grinding wheel speed • Gantry design for increased rigidity and improved grinding accuracy • Rotational workpiece transport with continuously variable speed control as the 4th axis • Position control device for monitoring the position height of the lower grinding wheel • 2 adjustable workpiece hold-downs at both in-feed and out-feed, with height monitoring, simple raw part stacking device, and finished part discharge via conveyor belt Duodst Hw Naepfx Ac Dsr • Semi-inclined, side-mounted grinding wheel dressing unit with pre-programmable dressing sequence, integrated as CNC axis in the control, with safety shut-off • Large separate switch cabinet, automatic central lubrication system, advanced pneumatic setup • Large PROMATEC (F) coolant unit with filtration and magnetic separator • Various grinding wheels, flanges, table segments, transport discs, large fume extraction system, etc. This machine is particularly suitable for the simultaneous plane-parallel grinding of workpieces in large series, such as stamped parts, piston rings, hydraulic parts, etc. Condition: good to very good – ready for demonstration shortly Delivery: ex stock – as inspected Payment: net – upon receipt of invoice This represents a rare opportunity regarding both condition and price. If you require another grinding machine – especially from the manufacturer DISKUS – please send us your inquiry.

Būklė: geras (naudotas), cilindrinės šlifavimo staklės Dujdpfstrgndsx Ac Dor

Būklė: geras (naudotas), max. gear diameter 250 mm with 3" cutter module 5.5 hobbing length 70 mm cutter module 5.5 max. recognized external diameter 300 mm spindle diameter 85 mm table bore diameter 39 mm Dsdpfxsgq Dgdj Ac Djur table external centering diameter Ø139.75 mm electric tool motor (b) 4 HP height 1,800 mm length 1,450 mm weight 2,450 kg width 1,000 mm

Būklė: naudotas, Gamybos metai: 1979, Pjovimo skersmuo 440 mm Mašinos svoris apie 780 kg +++++ Duedpfx Aef Dwa Uoc Dor Atkreipkite dėmesį, kad įrenginys yra išardytas ir paruoštas pakrovimui. Dėl šios priežasties negalima atlikti demonstracijos įjungus maitinimą ar pagaminti vaizdo įrašo. Mūsų skelbime pateiktos informatyviausios ir aukščiausios kokybės nuotraukos. Deja, papildomų nuotraukų atsiųsti negalime. +++++

Būklė: dilaminuotas dirbtuvėje (naudotas), mašinos/transporto priemonės numeris: 550-235-ELD, GENERAL SPECIFICATIONS Maximum rolling diameter: 41 mm Dusdpfsd Nw Ttjx Ac Dor Max./min. module range: 1.5 / 0.39 Maximum rolling width: 92 mm Maximum stroke of tool carriage: 760 mm Maximum rack length: 610 mm Max./min. diametral pitch: 20/40 – 32/64 Serial number: 550-235-ELD ELECTRICAL SPECIFICATIONS Main motor power: 15 HP

Būklė: geras (naudotas), Gamybos metai: 2006, 1 used 4-axis horizontal machining center Manufacturer: Haas Model: EC 1600 Year of manufacture: 2006 Travel distances X-axis: 1626 mm Y-axis: 1270 mm Z-axis: 813 mm Spindle centerline to table: 304 mm Spindle SK 50 Max. rated power: 22.4 kW Max. speed: 7,500 rpm Max. torque: 460.0 Nm at 700 rpm Table dimensions Length: 1626 mm Width: 914 mm Width of T-slots: 16.00 mm T-slot center distance: 125 mm Number of standard T-slots: 7 Max. load capacity on table (evenly distributed): 4,536 kg Integrated 4th axis (B axis) Table: 1626 mm x 813 mm Clamping surface diameter: 762 mm Adjustment range: 360° Max. swing diameter of workpiece: 1,270 mm Table load: 4,536.0 kg Max. rated power: 3.7 kW Dodev N Di Aepfx Ac Dsur Rotational torque (continuous): 2,712 Nm Backlash: 30 arc-sec Transmission ratio: 500:1 Braking torque: 5,423 Nm Minimum resolution: 0.001° Indexing accuracy: ±30 arc-sec Repeatability: 15 arc-sec Rapid traverse on B: 36°/sec Max. feed rate for machining (B axis): 36°/sec Spindle centerline to table: 146 mm Max. feed rate for machining in X, Y, Z axis: 12.7 m/min Rapid traverse on X: 15.2 m/min Rapid traverse on Y: 15.2 m/min Rapid traverse on Z: 15.2 m/min Axis motors Tool changer: 30 stations Max. tool diameter (full): 102 mm Max. tool diameter (adjacent pockets empty): 254 mm Max. tool length: 508 mm Max. tool weight: 13.6 kg Tool-to-tool (average): 8.00 s Chip-to-chip (average): 12.60 s General information Coolant tank capacity: 360 L Dimensions Domestic pallet: 488 cm x 366 cm x 346 cm Export crate: 488 cm x 366 cm x 348 cm Weight: 13,608.0 kg

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Savybės: Atstumas tarp centrų: 4500 mm Maks. tekinimo skersmuo: 750 mm Dsdpfx Aevy Adgjc Djur Veleno skylės skersmuo: 105 mm Valdymas: Heidenhain Komplekte 2 x griebtuvas, 500 mm ir 315 mm skersmens Komplekte 2 x pastovios atramos