KIESERLING WDHF35/50/75 strypų žievės nuėmimo staklės

KIESERLING Bar peeler WDHF35/50/75

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, veikimo valandos: 3 000 h, X ašies eiga: 6 100 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 950 mm, CNC-Fahrständer-Fräsmaschine – Komplett generalüberholt durch REM (2021) Leistungsstarke und vielseitige Schwerlast-Fräsmaschine, 2021 von REM-Spezialisten mit modernster Heidenhain TNC 320 Steuerung komplett modernisiert. Sofort einsatzbereit für die Produktion. HAUPTTECHNISCHE DATEN: • X-Achse (Querweg): 6.000 mm • Y-Achse (Vertikalweg des Fräskopfes): 2.000 mm • Z-Achse (Längsschlittenweg): 950 mm • Doppelfräs-Kopf | Kopfrotation: 360° • Spindeldrehzahl: 1.000 – 4.000 U/min • Spindelaufnahme: ISO 50 (automatische Spann-/Lösefunktion) • Kopfmaße: 290 × 290 mm • Spindelmotorleistung: 15 kW (Gleichstrom) • Maschinengewicht: ca. 32 Tonnen • CNC-Steuerung: Heidenhain TNC 320 WARUM BEI REM KAUFEN? ✔ Maschine vollständig geprüft und im Arbeitsbetrieb getestet ✔ Moderne CNC-Nachrüstung – neue Elektrik, neue Antriebe ✔ Dokumentation und technischer Support verfügbar Nwsdon D N H Tspfx Ahcjl ✔ Weltweiter Export | Wettbewerbsfähige Versandkonditionen Ideal zur Bearbeitung schwerer Werkstücke in Luftfahrt, Energie- und Schwerindustrie. Kontaktieren Sie uns für vollständige technische Daten, Fotos und Videodemonstration.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, X ašies eiga: 5 000 mm, Y ašies eiga: 3 500 mm, Z ašies eigos atstumas: 2 350 mm, X ašies padavimo greitis: 13 000 m/min, Y ašies padavimo greitis: 13 000 m/min, padavimo greitis Z ašis: 13 000 m/min, bendras ilgis: 12 000 mm, bendras aukštis: 4 800 mm, stalo plotis: 2 000 mm, bendras plotis: 6 800 mm, stalo ilgis: 2 500 mm, gręžimo pajėgumas: 180 mm, sukimosi greitis (min.): 2 000 aps./min, padavimo ilgis W ašis: 1 000 mm, Table-type Boring Mill Juaristi - TS5 MACH-ID 9610 Manufacturer: Juaristi Model: TS5 Control: HeidenHain iTNC530 Year of manufacture: 2009 Coolant through the spindle: 20 bar Paper filter system Tool changer (ATC) with 60 positions Spindle extension: L = 550 mm Full B-axis 360.000° with ROD 880C Table load capacity: 28,000 kg X-axis travel: 5,000 mm Y-axis travel: 3,500 mm Z-axis travel: 2,350 mm W-axis travel: 1,000 mm Table length: 2,500 mm Nwodpjy Hq Dysfx Ahcol Table width: 2,000 mm Table load capacity: 28,000 kg Spindle speed: 2,000 rpm Motor power: 51 kW Tool holder: 180 ISO50 ISO/BT/MK Feed rate X-axis: 13,000 mm/min Feed rate Y-axis: 13,000 mm/min Feed rate Z-axis: 13,000 mm/min Feed rate W-axis: 13,000 mm/min Tool changer: 60 positions Internal coolant supply (IKZ): 20 bar Number of controlled axes: 5 Length: 12,000 mm Width: 6,800 mm Height: 4,800 mm Weight: 44,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, this does not constitute representation or contractual terms. We recommend verifying all critical details.

Būklė: naudotas, Gamybos metai: 2007, x eiga 900 mm y eiga 300 mm z eiga 1000 mm Valdymas Siemens Sinumerik 840D Detalės skersmuo – maks. 1600 mm Modulis – maks. 20 mm Galvos apskritimo skersmuo 350 mm Frezavimo veleno skersmuo 375 mm Bendras elektros poreikis 80 kVa Staklių svoris apie 33,5 t Užimama vieta apie 10,530 x 6,375 x 4,680 m Padavimo greitis: - X ašis 1–3000 mm/min - Y ašis 1–3000 mm/min - Z ašis 1–4000 mm/min Veleno apsisukimų dažnis (aps./min): - Įrankis 26–265 Nwjdpfxjw Rrb Ho Ahcel - Detalės stalas 0–8 Įranga/priedai: - Motorizuota frezavimo galva M 2 - Frezavimo velenai - Alyvos aušintuvas - techninė dokumentacija

Būklė: labai geros būklės (naudotas), X ašies eiga: 1 500 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 750 mm, stalo plotis: 1 500 mm, stalo ilgis: 850 mm, sukimosi greitis (maks.): 2 500 aps./min, plunksnos brūkšnys: 120 mm, SHW UF 5 Travel Paths • X-axis (rotary table): 1,500 mm • Y-axis (spindle vertical): 1,000 mm Nwodpfx Asvfm I Tohcol • Z-axis (spindle horizontal): 750 mm Control • CNC control: Heidenhain TNC 355 Automatic Swivel Head (Change between horizontal and vertical machining) Quill 120 mm Spindle mount SK 50 Speed 2,500 rpm Partial overhaul 2014 • Year of manufacture 1990 • Inspection/Servicing 2025 Table assembly • Travel path: X = 1,500 mm • Clamping surface: 1,500 x 800 mm Chip conveyor Splash guard enclosure We stock ALL spare parts for this model range (SHW UF 5)! About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is the field of tool milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls, and control retrofitting. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization _____ Used machine - used milling machine - used bed milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used fraesmaschine - used CNC milling machine - used drilling milling machine - used milling machine for metal - used metal mill - used metal milling machine - used CNC mill - CNC milling machines - CNC milling machines - milling machine - large part machining - cnc large part machining - milling - shw - uf5 - uf 5 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 5 - UFZ 5 - UFZ5L - UFZ 5 L - MBM milling machine - MBM machine

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, X ašies eiga: 8 000 mm, Y ašies eiga: 1 300 mm, Z ašies eigos atstumas: 2 500 mm, greitas poslinkis X ašimi: 35 000 m/min, greitas poslinkis Y ašis: 40 000 m/min, greitasis eiga Z ašyje: 40 000 m/min, bendras plotis: 5 800 mm, bendras aukštis: 4 500 mm, bendras ilgis: 13 500 mm, stalo ilgis: 10 000 mm, stalo plotis: 1 250 mm, Travelling column – high performance, precision, and machining capability Linear RAM guide combined with hydrostatic HDS guide ACD2 milling head with 5,000 rpm and 1,400 Nm torque Aitek ATC chain magazine with 60 positions, L = 400 and Ø 250, max. 35 kg Filtration with through-spindle coolant at 15 bar Chip conveyor BLUM 3D measuring probe Wide bed, linearly guided on the X-axis, traverse path W = 930 mm Rotary table drive pre-installed in electrical cabinet X-Axis: 8,000 mm Y-Axis: 1,300 mm Z-Axis: 2,500 mm Table length: 10,000 mm Table width: 1,250 mm Spindle power: 40 kW Spindle speed: 5,000 rpm Tool holder: ISO 40/BT/MK X-axis feedrate: 35,000 mm/min Y-axis feedrate: 40,000 mm/min Z-axis feedrate: 40,000 mm/min Nwedsyr Dmdopfx Ahcel Milling head auto-indexing: 0.001 x 0.001 deg Operating hours: 3,800 h Length: 13,500 mm Width: 5,800 mm Height: 4,500 mm Weight: 45,000 kg Please note: The information on this page was provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Consequently, these details do not constitute representation or contractual terms. We recommend verifying all critical details.

Būklė: naudotas, Gamybos metai: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm Nodpfx Aheu Nc Rijcewl CNC control: TNC 530 Spindle operating hours: not yet known Milling spindle speed range: 1: 30 to 930 and 2: 930 to 4000 / stepless rpm Tool holder: horizontal/vertical: SK 50 (DIN 69871/DIN 69872 Type A) Spindle torque: 1000 Nm Spindle head swivels left and right: 90° Feed rate: 1 - 6000 mm/min Feed force: 30 kN Rapid traverse: 15 m/min Number of tools: 1 pc. Clamping surface table L x W: 1600 x 800 mm Table load capacity: 40 kN Operating voltage: 400 V / 50 Hz Total power requirement: 42 kW Machine weight approx.: 15.2 t Compressed air: 6.3 bar Machine dimensions approx. L x W x H: 3.1 x 4.7 x 2.6 m Dimensions: coolant filter: 1.9 x 1.6 x 1.4 m Required floor space approx. L x W: 38.5 m² Applications: Milling, drilling, thread cutting, boring with direct encoded linear measuring systems the guides for all three axes are flat slideways milling head position controlled +/-90° internal coolant supply (IKZ) and external cooling milling spindle rated drive power 22 kW with integrated hydraulic unit up to 100 bar operating pressure with coolant system, high pressure pump 60 bar (internal cooling), nominal flow 20 l/min, and low pressure pump 4 bar (external cooling), as well as spray gun compact belt filter RESY REBER SYSTEMATIC GmbH, Type KBF 452/710 hinged belt chip conveyor DGS, Type SSF 600 P50, year 2004 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2022, veikimo valandos: 3 728 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0040001634C, tekėjimo ilgis: 500 mm, tekėjimo skersmuo: 240 mm, ašies variklio galia: 1 400 W, veleno greitis (min.): 5 000 aps./min, veleno greitis (maks.): 6 000 aps./min, veleno skylė: 170 mm, X ašies eiga: 210 mm, Y ašies eiga: 525 mm, Z ašies eigos atstumas: 525 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 22 m/min, greitasis eiga Z ašyje: 30 m/min, sukimo momentas: 171 192 Nm, padavimo jėga X ašis: 3 N, DMG MORI CTX Alpha 500 pagaminta 2022 metais. Šis universalus tekinimo centras turi Siemens valdiklį ir LNZ Quick load servo 80S2. Svoris: 4 300 kg. Dėl išsamesnės informacijos apie šį įrenginį susisiekite su mumis. Nedpfxjyz S T Ss Ahcowl

Būklė: naudotas, Table unit from a DROOP & REIN gantry milling machine Clamping plate with T-slots made of steel/cast iron Table unit with clamping plate and very massive guideway Table clamping area: 5500 x 2000 mm Travel of the table clamping plate: approx. 3100 mm Table height (overall height): 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single start) - Machining table guided very stably on the bed - Metal telescopic guideway cover - Originates from a DROOP & REIN gantry milling machine - Table longitudinal movement via ball screw and SIEMENS servo motor - Clamping surface with 11 pcs. T-slots, 28 mm - Drive via SIEMENS Servomotor 1FT6134-6AB71-1AG2 with encoder IC200448S/R (RN 000 B25) Nedpethuzpsfx Ahcowl Total length: 9500 mm Width: 2000 mm Overall height: 1050 mm Net weight: 28 tons Good condition

Būklė: naujas, Table Length: 2400 mm Table Width: 1200 mm Table Height: 200 mm Material Thickness: 25 mm Weight: 920 kg Manufacturer: GERD WOLFF Technical Details: • Length: 2400 mm • Width: 1200 mm • Height: 200 mm • Weight: 920 kg • Hole Diameter: 28 mm • Hole Spacing: 100 mm • Plate Thickness: 25 mm Advantages and Features: • 3-day gas nitriding process • Enhanced corrosion resistance • Anti-stick protection against welding spatter • Maximum load capacity • Increased fatigue strength • Improved vibration resistance • Precision fine scaling • Reinforcement with weld seams and ribs on the underside • Optimum working height of 820-865 mm • 6x height-adjustable support legs • Matching accessory set available (optional) Our welding tables are manufactured using HT 300 grade cast iron and are nitrided in one piece after mechanical processing. Additionally, they feature precise fine scaling engraved using laser technology. To ensure optimum stability, our welding tables are reinforced with weld seams and ribs on the underside (see images). Moreover, they undergo a three-day gas nitriding process which significantly increases the corrosion, fatigue, and vibration resistance of the tables. All our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, maximum is 665 mm, providing a variable working height of 820 to 865 mm. Other available sizes: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 Nwjdsynbmmepfx Ahcsl • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 The images do not correspond to the original size and are for illustration purposes only. Our welding tables are manufactured for our distribution brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer. 3D Welding Table – 3D Clamping Fixtures – 3D Precision Welding Table

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Löser centerless tube grinding machine - belt grinding machine - centerless tube polishing machine - cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and was completely overhauled in 2012. During the overhaul, it was converted for polishing and has since only polished approx. 10,000 parts. After that, the machine was no longer in use. During the general overhaul, the motors, bearings, and the entire electrical cabinet with frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. A wastewater treatment system including pumps is currently not available. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine is suitable for tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power output of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach. Nwsdpfx Ahotmqi Decel