Suvirinimo dūmų ištraukimas

KEMPER ProfiMaster

Sąlyga: geras (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 190600036, ProfiMaster is a high-quality extraction unit designed for occasional to frequent use when welding with low to medium levels of welding fumes. The device uses disposable filters with a large capacity, which can be replaced quickly and conveniently. The rotating and swiveling extraction hood provides a 360-degree working radius, minimizing the need for repositioning during welding. - Hose configuration with 4m extraction arm - Includes start-stop automatic The unit was purchased in 2019 and, due to operational circumstances, has not been used since spring 2023. Nodpfswxccfex Abasdd

Sąlyga: geras (naudotas), Gamybos metai: 2019, mašinos/transporto priemonės numeris: 9501441040100301, Listing 24469 Welding Fume Filtration System with Spark Pre-Separator + Extraction Arms Technical Specifications - Upright design for filtering welding fumes and grinding dust - Welding fume classification “W3” - Suitable for filtering welding fumes from steels containing over 30% chromium and nickel - Exhaust air can be recirculated into the workspace (e.g. for heating) or discharged externally - TEKA control system Ndodpfjuwl Dujx Abaed - Airflow capacity up to approx. 4000 m³/h - Maximum static pressure up to approx. 3000 Pa - 4 BIAM filter cartridges - Cleaning system: Pulse-Jet with separation efficiency >99% - Separate control cabinet - Power supply: 400 V / 4 kW - Space requirement (filter cube): approx. W 850 x H 3150 x D 850 mm - Weight: approx. 380 kg - Separate spark pre-separator, TEKA brand, type FVS 4000–6000 - Space requirement (spark separator): W 850 x H 1650 x D 950 mm - 3 articulated extraction arms - Piping included

Sąlyga: naujas, Gamybos metai: 2024, bendras aukštis: 860 mm, bendras ilgis: 2 400 mm, bendras plotis: 1 200 mm, bendras svoris: 920 kg, aukščio reguliavimo tipas: mechaninis, Manufacturer: GERD WOLFF Technical Specifications: • Length: 2400 mm • Width: 1200 mm • Height: 200 mm • Weight: 920 kg • Hole diameter: 28 mm • Hole spacing: 100 mm • Plate thickness: 25 mm Advantages and Features • 3-day gas nitriding process • Increased corrosion resistance • Anti-adhesion protection against weld spatter • Maximum load capacity • Improved fatigue strength • Enhanced vibration resistance • Fine scale marking • Reinforced with weld seams and ribs on the underside • Optimal working height of 820-865 mm • 6x height-adjustable support legs • Suitable accessory set available (optional) Our welding tables are manufactured from cast iron grade HT 300 and are nitrided as a single unit after machining. Additionally, the tables feature a precise fine scale that is engraved using laser technology. For optimum stability, our welding tables are reinforced on the underside with weld seams and ribs. (See images) Ndsdpfevbbqnex Abasd Furthermore, each table undergoes a 3-day gas nitriding process, which increases corrosion resistance as well as fatigue and vibration strength. All our tables come with adjustable legs. The minimum adjustment range is 620 mm, the maximum is 665 mm. This allows for a variable working height from 820 to 865 mm. Other available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 The illustrations are not to scale and serve for reference purposes only. Our welding tables are produced for our distribution brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer. 3D Welding Table – 3D Clamping Fixtures – 3D Precision Welding Table

Sąlyga: geras (naudotas), Gamybos metai: 2018, Manufacturer: INDUCTAFLEX Model: AL-3e Control: ACCURATE Touch-Screen Year of manufacture: 2018 3 servo-driven rolls Torque per roller: 3500 Nm Electrically adjustable support rolls Intelligent software features: - Ellipse program - U bend shapes - Tangent control - Automatic section detector Specifications Metric / US Standard Horizontal and vertical operation Horizontal axis Shaft diameter: 105 mm Number of rolls: 3 X-axis stroke: 0 - 400 mm Approximate dimensions: Length: 4500 mm Width: 3200 mm Height: 2700 mm Weight: 3300 kg Ndodpfjvd Dftsx Abasd Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend verifying all critical details independently.

Sąlyga: naujas, Balkaya Profile Ring Bending Machine HBM 80 Technical Specifications: Tool mounting, shaft: 80 mm Tool size: 245 mm Working speed: 4.5 m/min Motor: 4 kW Hydraulics: 30 tons Nodpjh T Ulnjfx Abaedd Dimensions (LxWxH): 1450 x 1050 x 1800 mm Weight: 1400 kg 3 driven rollers Hardened standard rollers Hardened and ground tool mounting, shaft Mobile control panel Horizontal and vertical working positions Digital display Compliant with CE standards

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, Galia: 6,5 / 9,4 kW Savas svoris: 365 kg Šių įrenginių turime keletą! Njdpfx Abjm Exdwsasdd Pakrovimas ir/arba siuntimas galimi!

Gamybos metai: 2025, Sąlyga: beveik kaip naujas (parodų įrenginys), Our mobile wrapper is one of our demonstration machines, in good condition, with minor scratches on the housing and chassis. Comes with a 12-month warranty, fully inspected and serviced. Optional accessories such as a wide sensing belt are available on request. Key advantages at a glance: - Operating area of just 750 mm around the pallet - Extremely compact design - Patented steering system - Requires up to 40% less space compared to its competitors - Very easy to operate - German customer support - Upgrades available later as optional features The LEO only needs 75 cm (approximately shoulder width) around the pallet to be wrapped. OPERATING RANGE Pallet dimensions: Height: min. 500 mm / max. 2,000 mm Length: min. 600 mm / no limit Width: min. 600 mm / no limit Machine dimensions: Height: 1,950 mm Length: 980 mm Width: 700 mm Pallet weight: min. 50 kg (lower on request) FILM DATA Wrapping programmes: - Bottom and top wrapping - Cross and one-way wrapping - with stop for top sheet application Max. film width: 500 mm Max. core diameter: 76 mm Max. outer diameter: 220 mm MACHINE DATA Voltage: - Battery: 2x 12 Volt - Integrated charger: 220 Volt - Drive: 2x 24 Volt - Film carriage: 1x 24 Volt Film carriage: - Separate parameters for upward and downward movement - Mechanical film brake - Continuously variable adjustment Control: - Touchscreen with digital display - Quick select buttons - Drawbar with navigation buttons - Pallet detection via sensing belt - Emergency stop switch - 6 programmable working modes - Double collision protection Mast: Stationary design Weight: 195 kg Ndjdpfx Aehfc Rijbasd ADDITIONAL FEATURES - Height detection via photocell - All drives via chain - Suitable for wrapping black products or using black stretch film (optional) - Acoustic and visual warning signals - CE marking Wrapping black products or use of black stretch film is possible. The machine can be charged using any standard Euro plug cable in a 230V household socket. Such a charging cable is, of course, included in the scope of delivery.

Gamybos metai: 1980, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 3253-80, Offer 22045 Technical data (approx.): - Pressing force: 10 t Nodpfxoktg Dhe Abaodd - Throat depth: 150 mm - Table size: 520 x 320 mm - Table height adjustment: 160 mm - Clearance hole in table: 165 x 125 mm - Max. installation height: 220 mm - Ram surface: 240 x 150 mm - Pin hole in ram: 30 mm - Ram adjustability: 40 mm - Stroke adjustment: 4 – 60 mm - Strokes per minute: 130 1/min - Hydraulically actuated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive: 380 V / 1.1 kW - Required space (approx.): W 1000 x H 1800 x D 1100 mm - Weight (approx.): 1300 kg

Sąlyga: geras (naudotas), Gamybos metai: 1986, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0783, Mitre Cold Circular Saw EISELE Model: VMS-III-S-PV Type No.: 430 Machine No.: 0783 Year of Manufacture: 1986 Cutting capacity at 90° (round): Ø 120 mm Cutting capacity at 90° (flat): 150 x 110 mm Cutting capacity at 45° (round): Ø 100 mm Cutting capacity at 45° (flat): 120 x 100 mm Saw blade diameter: 350 mm Ndjdpfet A Ar Sjx Abajd Saw blade speed: 17 + 34 rpm Mitre cuts: 45° to the left, 90°, and steplessly up to 30° (60°) to the right Motor power: 2 and 2.6 kW Power supply: 380 Volt, 50 Hz Equipment: - Semi-automatic vertical cold circular saw - Pneumatic quick-action material clamping device - Infinitely adjustable pneumatic saw blade feed - Convenient mitre adjustment with fixed stops - Saw carriage on robust rectangular guideway - Comfortable and stepless lifting adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - With Eisele rotation compensation for long saw blade life - Easy saw blade change - High productivity with minimal space requirement (less than 1 m²) - Coolant system integrated in machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight: 460 kg The machine can be tested or demonstrated under power on site by arrangement. All information without guarantee. Subject to prior sale. This item is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller as well as for any injury to life, limb, or health.

Sąlyga: geras (naudotas), Gamybos metai: 1990, Ruloninio metalo išvyniojimo, pjovimo ir vyniojimo linija LTs. Linija 1300 mm/3 mm. tiksliam pjovimui. Skirta išvynioti, pjauti metalą, supjauti į mažesnius rulonus, suvynioti į mažus rulonus. Linija pirkta nauja, vieno savininko, laiku prižiūrėta LTs atstovų. Staklės yra prijunktos ir galima, bet kada išbandyti Vilniuje. LTs 1300/3 pjovimo liniją sudaro: Išvyniojimo dekoileris Kelių ašmenų žirklės Stabdymo ir atskyrimo segmentas Suktuvas su separatoriumi Vežimėlis Spinta su valdymo pultu Techninė specifikacija: Ndedpfx Ajpbwapsbajd Metalo plotis: 1250 mm. Storis: 700 mm. Skersmuo min.: 508 mm. Skersmuo maks.: 620 mm. Išorinis apskritimo skersmuo: 1200 mm. Maksimalus svoris: 7 T. Nupjautų juostų plotis min.: 75 mm. Nupjautu juosto maks. plotis: 1250 mm. Maitinimo įtampa: 3 x 380 v. Galia: 18 kW. Pagaminta: Lenkijoje. Jei turėsite daugiau klausimų, mielai atsakysime.