Cilindrinio šlifavimo staklės - Išorė

KELLENBERGER 600 U

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical components (checked and/or replaced) Grinding wheel headstock Disassembly, cleaning of parts, replacement of worn and defective parts, motor overhaul, bearing replacement, belt replacement, spindle disassembly, replacement of seals and O-rings + adjustment. Newly painted. Workpiece headstock Disassembly, cleaning of parts, replacement of worn and defective parts, motor overhaul, belt replacement. New spindle bearings. Newly painted. Tailstock Disassembled, inspected, overhauled. Hydraulics Disassembled, motor check, replacement of hoses, defective and worn parts. Hydraulic block inspected. X Axis Disassembly, replacement of worn parts such as O-rings, seals, rings, etc., overhaul of hydraulic piston, grinding of tables. Z Axis Disassembly, grinding of tables, replacement of worn and defective parts, hydraulic piston overhaul, newly painted. Electrical cabinet Complete inspection, various relays replaced. Painting Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer’s protocol. Inspection and cleaning of various accessories. Origin CH Voltage 380 / 50 / 3 Net weight approx. 2200 kg Customs tariff number 8460.2920 TECHNICAL SPECIFICATIONS Nominal centre distance 600 mm Max. centre distance (extended headstock) 750 mm Centre height, standard 125 mm Centre height with interchangeable shoes for headstocks 175 to 250 mm Max. workpiece diameter (125 mm centre height) 250 mm Max. workpiece diameter with interchangeable shoes 350 to 500 mm Table swivelling in either direction 10° Max. length for surface grinding (max. width = 200 mm) 900 mm Table speed with continuously variable hydraulic control up to approx. 6 m/min Table reversal dwell time 0-5 sec. Wheel for external grinding, diameter-width-bore 400x50x127 mm Wheel for surface grinding 250x13x76 mm Grinding spindle speeds 1500/1700/2200/3600 rpm Grinding headstock swivel 270° With index every 90° Vertical movement of grinding headstock, centre height 125-350 mm Cross travel of grinding headstock 285 mm Hydraulic rapid advance/retract stroke 40 mm Intermittent feed of the wheel by table reversal 0.001-0.03 mm/dia Continuous plunge grinding feed 0-0.9 mm/dia Micrometric feed stop, graduated 0.001 mm/dia Workpiece headstock swivel 360° Continuously variable workpiece spindle speed, standard/special 20-400 / 10-400 rpm Workpiece headstock/tailstock internal taper 5/3 Morse Grinding headstock motor, approx. 4 HP All technical details are given without obligation and subject to errors or omissions. Fpjdpew U Ry Njfx Abmjr

Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 31.207.011, Gamybos data Kilmės šalis Šveicarija Įtampa 380V Grynoji masė 3150 kg Išoriniai matmenys 400x185x175 cm Muitinė pozicija 8460 TECHNINIAI DUOMENYS Atstumas tarp centrų 1000 mm Centro aukštis 175 mm Šlifavimo ratukas: skersmuo/plotis/vidinis skersmuo 500 x 80/100 x 203,0 mm Maksimalus šlifavimo ratuko plotis 80(100) mm Fpsdpjiwtm Sjfx Abmer Veleno greičiai 1220, 1360–1530 min⁻¹ Stalas (progresyviai reguliuojamas) 0.02 iki 6,0 m/min Kryžminė slankma, eiga 220 mm Ruoinio veleno korpusas, Pasukimo kampas 360° Greitis (progresyviai reguliuojamas) 20 min⁻¹ iki 400 min⁻¹ Maksimalus ruoinio skersmuo 249 mm Maksimali eiga 1100 mm Griebtuvo kūgis MK3 Techniniai duomenys pateikiami neįsipareigojant, galimi netikslumai arba klaidos.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Mašinos charakteristikos: Centro aukštis: 125 mm (175 mm su aukščio elementais) Atstumas tarp centrų: 600 mm Šlifavimo diskas: skersmuo 400 mm, plotis 50 mm, anga 127,0 mm Kampinis poslinkis: 270° Ruožo veleno galvutė: nuo 20 iki 400 aps./min. Veleno kūgis: 5 MT Galinių atramų kūgis: 3 MT Stalo kampinis poslinkis: 10° Stalo eiga: bepakopė iki 6,0 m/min Išorinio šlifavimo disko variklis: 4,0 kW Darbinės galvutės variklis: 2,2 kW Mašinos svoris apie: 2700 kg Bendri matmenys: ilgis – 2580 mm, plotis – 1680 mm, aukštis – 1670 mm Fsdpfx Asxyw Ehobmjpr Mašina visiškai atnaujinta, komplekte: - Nauja elektros spinta ir elektros schema - Naujas variklis ir dažnio keitiklis pagrindinei galvutei - 2 ašių skaitmeninė padėties rodymo sistema (DRO) - Aušinimo bakas - Geometrija pagal Kellenberger protokolą - Daugybė priedų

Sąlyga: dilaminuotas dirbtuvėje (naudotas), KELLENBERGER 600 U 175 yra didelio tikslumo, tiksli ir patikima apskrito šlifavimo staklė. Pajėgumas: centre aukštis 175 mm, centre atstumas 600 mm; šlifavimo diskas Ø350×50 mm, skylė 127 mm; šlifavimo galvutė 270°. Techniniai duomenys: disko apsukos 1500–3600 aps./min (4 žingsniai); ruošinio velenas 20–400 aps./min (be pakopų); stalo pakrypimas 10°, iki 6 m/min; prijungimas 3×380 V 50 Hz; šlifavimo veleno variklis 4 AG; svoris ≈2200 kg; matmenys 3000×1750×1600 mm. Priedai: 2 ašių skaitmeninis indikatorius, centravimo galvutė su tiksliu reguliavimu, vidaus šlifavimo įranga, disko apsauga, apsauginis dangtis, slankiojamos durys. Tinka sandarioms tolerancijoms automobilių, laikrodžių, įrankių gamybos, aviacijos ir medicinos technikoje. Fjdpfx Asxx U H Tjbmspr

Sąlyga: visiškai atnaujintas (naudotas), Machine fully overhauled With digital display Centre height: 175 mm Centre distance: 1000 mm Grinding wheel: 400 x 50 x 127 mm + 225 x 20 x 76.2 mm Grinding wheel speed: 1,500–2,200 rpm Fpjdpfxjwhk Uue Abmjr With internal grinding device Various accessories MARCELS MASCHINEN AG

Sąlyga: geras (naudotas), Gamybos metai: 1988, Ref Nr.: 10396 Gamintojas: KELLENBERGER Modelis: 600 U - Nr. 40 Pagaminimo metai: 1988 Valdymo tipas: Konvencinis Valdymas: N/A Sandėliavimo vieta: Halberstadt Kilmės šalis: Šveicarija Atstumas tarp centrų: 600 mm Centrų aukštis (standartinis): 125 mm Fpjdpsxvw E Tefx Abmjr Centrų aukštis pakėlus darbines kaladėles ant galvutės ir griebtuvų: 175 - 250 mm Pasukimo diametras su pakėlimo kaladėlėmis, maks.: 350 - 500 mm Stalo pasukimo kampas į abi puses: 10° Stalo sustojimo trukmė: 0 - 5 sek Skersmuo / Plotis / Skylė: 250 x 13 x 76 mm Šlifavimo rato veleno greičiai: 1500/1700/2200/3600 Šlifavimo galvutė pasukama: 360° Šlifavimo galvutės skersinė eiga: 285 mm Greitas šlifavimo galvutės pirmyn-atgal judėjimas: 40 mm Pertraukiamas padavimas per vieną stalo apsisukimą: 0,001 - 0,03 mm/dia Padavimo mikrokorektorius, 1 prietaiso skalės padala: 0,001 mm / Ø Darbo greičiai be pakopų reguliuojami (įprastas / specialus): 20-400/10-400 Maks. šlifavimo ilgis: 900 mm

Sąlyga: naudotas, 5 pcs. flanges and various accessories for/from Kellenberger 600 U and Kellenberger 1000 U. Fedpfx Abjxm Sxpsmepr

Sąlyga: naudotas, Gamybos metai: 1992, 4 varikliais varomos šlifavimo velenai (skysčiu aušinami, apsauginis oras / alyvos rūko tepimas) kartu su REFU HF keitikliu, pvz., Voumard 400 CNC T4 velenų maitinimui. Šlifavimo velenas GMN TSSV 170-7500: 7 500 aps./min, 350 V, 19,3 A, 7,5 kW, 250 Hz Šlifavimo velenas Voumard BM15-170: 15 000 aps./min, 350 V, 35 A, 18 kW, 250 Hz Šlifavimo velenas Voumard BM18-150: 18 000 aps./min, 350 V, 28,5 A, 12 kW, 600 Hz Šlifavimo velenas Voumard BM24-150: 24 000 aps./min, 350 V, 27 A, 12 kW, 800 Hz REFU HF-Umformer 316/25 – aukšto dažnio keitiklis (inverteris/frekvencinis keitiklis) skirtas šlifavimo velenų maitinimui GMN įrankių velenas Yra įvairių šlifavimo velenų ašių / diskų laikiklių komplektas, kuris tinka šiems velenams ir gali būti įsigytas atskirai. Kaina / detalės pagal užklausimą Visi techniniai duomenys pateikiami su galimomis klaidomis/neteisingumais. Prekyba vykdoma tik Europos Sąjungos šalyse. Fpjdpfx Absl Tn Afomor

Sąlyga: naudotas, Gamybos metai: 1986, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Very well-maintained machine. The machine comes from a precision grinding workshop in the Black Forest. Still under power at the previous owner’s site and can be inspected for a short time. In 2022, the machine underwent a partial overhaul and servicing at our facility, including restoration of the geometry to manufacturer's specifications. Equipment: Fpjdpfx Absv Tqqnomsr - 2-axis FAGOR digital readout - Sine bar - Tailstock with fine adjustment - Hydraulic tailstock - Face grinding attachment - Internal grinding attachment - Fischer UJ70 internal grinding spindle - Paper band filter - Automatic cycle: roughing - finishing - spark-out - retraction

Sąlyga: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 32461/2384, Origin of manufacture: Switzerland Voltage: 380 / 50 / 3 (V/Hz/Ph) Net weight: 2200 kg TECHNICAL DATA Nominal distance between centres: 600 mm Maximum distance between centres (workpiece spindle stock and tailstock retracted): 750 mm Standard centre height: 125 mm Centre height with interchangeable intermediate plate (workpiece spindle and tailstock): 175 → 250 mm Maximum possible swing diameter (125 mm centre height): 250 mm Maximum possible swing diameter with intermediate plates: 350 → 500 mm Table swivelling range, each side: 10° Maximum grinding length (table width = 200 mm): 900 mm Table speed, hydraulically and steplessly adjustable: approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for cylindrical grinding, diameter x width x bore: 350/400 x 50 max. x 127 mm Fodped Amifsfx Abmepr Grinding wheel for surface grinding, diameter x width x bore: 250 x 13 x 76 mm Grinding spindle speeds (rpm): 1500 / 1700 / 2200 / 3600 Swiveling range of grinding spindle headstock: 270°, lockable every 90° Vertical travel of grinding spindle headstock (centre height): 125–350 mm Cross travel of grinding slide: 285 mm Hydraulic rapid advance and return of grinding slide: 40 mm Feed per table reversal, stepless: 0.001–0.03 mm/rev Feed amount for plunge grinding: 0–0.9 mm/rev Micro stop for feed per division: 0.001 mm/rev Swiveling range of workpiece spindle stock: 360° Workpiece spindle speeds, steplessly adjustable normal/special: 20–400 / 10–400 rpm Internal taper, workpiece spindle/tailstock: Morse 5/3 Grinding spindle motor, approx.: 4 HP Errors and omissions excepted. Technical data provided without obligation. Inventory No. 2170089, Machine Accessories List: 1 workpiece spindle headstock MK5 1 sine bar without dial comparator 1 grinding spindle headstock with 4 drive pulleys 1 tailstock MK3 1 collet draw system with collet and reducing sleeve B32 1 internal grinding attachment with Fischer quill UJ50x250 – drive pulley Ø 48 for 14,000 rpm 1 rotatable disc dressing device with 50 mm base 1 table rotation stop without comparator 1 coolant system by decantation 1 ejector 1 balancing bar

Sąlyga: visiškai atnaujintas (naudotas), Kellenberger vidinių ir išorinių detalių universalioji apvali šlifavimo staklė Kellenberger 1500 U - 175 (įskaitant vidinį šlifavimo įrenginį) Atstumas tarp centrų: 1500 mm - Centro aukštis: 175 mm Siemens servovariklis. Dažnio keitikliai viduje ir išorėje, WSS Fedewqlykopfx Abmopr Parduodama su įvairia papildoma įranga. Prieinama iš karto! 1000U variantas: restauravimo procese

Sąlyga: naudotas, Internal diameter: 340/440 mm Grinding depth: 99,999 mm Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Spindle bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20-400 rpm Workhead swivelling: 360° Grinding spindle head swivelling: 180° ± Grinding spindle speed: 1,500, 1,700, 2,200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±10° Table longitudinal travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (flying): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirement approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhauls/retrofits, we not only deliver machines refurbished to as-new condition with warranty, but also offer service for your machines. Warranty: 12 months from delivery—for Germany and neighboring countries. Pure internal cylindrical grinding machine with stepless adjustable drive (0–100%). Available in current RAL colors! Standard centre height 175 mm, extendable to 225 mm. Fixed internal grinding spindle with belt tension via tension pulley! Z-axis reversing accuracy max. 0.01 mm! Geometrically overhauled and newly painted, with: - New electrical cabinet. - New three-phase workpiece spindle motor and controller. - 2-axis digital readout, X-axis resolution 0.5 μm. Options: - Encoder with digital display in the workhead - New stable internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height to max. 225 mm Fpsdpfx Asd Ih Dxobmor Includes: - Operating tools Further accessories on request. The machine tool currently does not meet the fundamental safety and protection requirements as specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). The minimum required safety level must be determined by means of a risk assessment pursuant to BetrSichV.

Sąlyga: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – flying: 130 kg including clamping device Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space required approx.: 3.1 x 2.0 m As the world’s leading company in the field of Kellenberger overhaul/retrofit, we not only offer machines delivered in as-new condition and with warranty, but can also provide comprehensive service for your machines, fully refurbished to metric standards and newly painted. Version R: Machine features central lubrication and roller guideways in the X-axis flat way as well as air lift in the grinding headstock. -Digital readout on 2 axes. X-axis resolution: 0.5 μm Optional equipment at extra cost: - Rotary encoder with digital readout in the workpiece headstock - Rotary encoder with digital readout in the grinding headstock (no height adjustment possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase in centre height to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Draw tube for chuck Fjdpfx Asd Ih D Nobmspr Further accessories available on request. At this time, the machine tool does not comply with the fundamental safety and protection requirements as specified in the BetrSichV 2015. Raising the required minimum protection level must be determined by means of a risk assessment according to BetrSichV.

Sąlyga: naudotas, Grinding wheel diameter: 0 mm Drive power: 0 kW The following grinding spindles are in stock: 1 pc. Fortuna FAVS 100 R, 250.250, 12,000 rpm – €700 each 1 pc. SKF 1033293-1 (ex Hoefler) – €1,200 each 1 pc. SKF 1033293-2 (ex Hoefler) – €1,200 each 1 pc. SKF 1040329 (ex Hoefler) – €1,700 each Fodpfsd Ig U Rox Abmepr

Sąlyga: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Fpodpfjd Ih D Rsx Abmer Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivels: 360° Grinding headstock swivels: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivels: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight – between centres: 130 kg incl. clamping device Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirements approx.: 3.1 x 2.0 m Machine completely overhauled according to Kellenberger standards. - Workpiece spindle drive utilises modern three-phase technology - 2-axis digital readout. X-axis resolution: 0.5 µm Optional extras (available at additional cost): - Rotary encoder with digital display on workpiece headstock - Rotary encoder with digital display on grinding headstock (not compatible with height adjustment via spindle) - New, robust internal grinding device, diameter 80 mm or 100 mm, with height adjustment - Centre height increase up to max. 225 mm - Variable speed control for grinding spindle Included accessories: - Operating tools - Collet tube for chuck Further accessories available on request.