Radialinė gręžimo staklės

Kao Ming KMR-1250DH

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Prima Industrie Platino 1530 laser cutting machine with only 4,300 cutting hours Iiedjivg Hgspfx Aauea This Prima Industrie Platino 1530 laser cutting machine, 4.0kW CO₂, was manufactured in Italy in 2011 and installed at the end of 12/2011. Equipped with a PRIMACH 20 L control unit.

Būklė: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 12 000 kg, padavimo eiga Y ašimi: 300 mm, padavimo ilgis Z ašis: 1 080 mm, stalo skersmuo: 1 200 mm, X ašies padavimo greitis: 3 m/min, Y ašies padavimo greitis: 500 m/min, padavimo greitis Z ašis: 3 m/min, įėjimo srovė: 195 A, ruošinio skersmuo (maks.): 1 600 mm, frezos veleno ilgis: 450 mm, stalinis gręžtuvas: 400 mm, veleno greitis (min.): 250 aps./min, bendras svoris: 51 000 kg, galia: 115 kW (156,36 AG), Įranga: dokumentacija / vadovas, Liebherr high-performance gear hobbing machine LC1502 in good condition Control system: Liebherr LH90 V4, drives by Bosch Rexroth Extensive accessories such as BHG, cooling unit for lubricant and coolant, extraction system, arbor shafts, various software packages/parameter extensions and complete documentation. Iiodpfjwqm A Tsx Aauja We can also assist with installation and commissioning through to production, according to effort!

Būklė: naudotas, Gamybos metai: 1969, Grinding height: 60 mm Grinding width: 120 mm Iiodpfx Ajt Hw N Heausa Grinding wheel diameter: 600 mm Grinding length: mm Workpiece height: 60 mm Total power requirement: 50 kW Machine weight approx.: 7,000 kg Space requirement approx.: m DISKUS Vertical double-sided surface grinding machine in C-frame design with rotary table workpiece feed Model: DDS 600 CRA Year of construction: 1969 Serial no.: 6672 --- Grinding wheels - diameter x bore per side: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc outside Ø: 810 mm Workpiece: Max. grinding height x grinding width: approx. 60 x 120 mm Vertical quill adjustment per side: approx. 150 mm Hydraulic infeed pulses for depth feed: 0.0025 - 0.05 mm Outer diameter of transport disc: approx. 810 mm Rotary table feed rate steplessly adjustable: 14 – 145 mm/s Grinding wheel speed per side: (24 m/s) / 765 rpm Grinding spindle drive per side: 22 kW each Total drive: approx. 50 kW/380 V/50 Hz Total weight: approx. 7,000 kg Accessories / Special Equipment: • Workpiece rotary device for round transport discs with apertures for inserting the parts and with automatic ejection of finished parts down a chute into a transport box. • IONIC measuring control no. 9 So with measuring probe for finished workpiece height and, if necessary, with automatic hydraulic grinding wheel infeed. • Stepless speed regulation of the rotary device according to grinding dimensions and workpiece. • Manual infeed of grinding wheels via corresponding buttons. • hydraulically swivelling dressing device (RA) between both grinding wheels for simultaneous dressing of both grinding wheels with appropriate compensation and with automatic repositioning to effective workpiece thickness after dressing = high time savings, can be triggered manually or by timer. • Ammeter displays for both grinding spindle drives. * Central lubrication, • Mechanical height control of workpieces with machine shutdown if overheight is detected. • Free-standing control cabinet, separate hydraulic unit, separate large band filter unit, various grinding wheels, various transport discs, etc. This machine is especially suitable for simultaneous, plane-parallel grinding of workpieces in large series. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – soon available for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Gamybos metai: 1992, būklė: naudotas, Grinding height 50 mm Grinding width 120 mm Grinding wheel diameter 600 mm Total power requirement 85 kW Machine weight approx. 9,500 kg D I S K U S CNC-controlled, vertical double-sided surface grinding machine with rotating workpiece feed and IONIC measuring control. Type: DDS 600 III PRM - CNC Year of manufacture: 1992 # 7924 _____ Grinding wheel dimensions (each): 600 x 150 x 75 high mm Workpiece data: Grinding height: approx. 1.5 – 50 mm Iodpfxet Hw Nae Aausia Grinding width: approx. 20 – 120 mm Vertical slide adjustment, each: approx. 150 mm Grinding wheel infeed via CNC: 0.0001 mm Workpiece transport device feed continuously adjustable: 40 - 235 mm/sec. Grinding wheel speed (30 m/s): 191–955 rpm Grinding spindle drive, infinitely variable (per spindle): 37 kW Total drive approx. 85 kW / 380 V / 50 Hz Weight approx. 9,500 kg Accessories / Special Equipment • SIEMENS CNC control SINUMERIK 810 G with monitor, for 4 axes (top and bottom infeed, dresser, and workpiece table rotation), direct input of all grinding data, and in conjunction with • IONIC measuring control no. 17 A with 2 measuring probes for scanning workpieces after the grinding cycle, triggers corresponding infeed of the grinding wheels, continuous measurement data displayed on the monitor for statistics, workpiece counting, etc. • Digital display of power (amperes) for the drive motors and the grinding wheel speed • Gantry design for increased rigidity and improved grinding accuracy • Rotational workpiece transport with continuously variable speed control as the 4th axis • Position control device for monitoring the position height of the lower grinding wheel • 2 adjustable workpiece hold-downs at both in-feed and out-feed, with height monitoring, simple raw part stacking device, and finished part discharge via conveyor belt • Semi-inclined, side-mounted grinding wheel dressing unit with pre-programmable dressing sequence, integrated as CNC axis in the control, with safety shut-off • Large separate switch cabinet, automatic central lubrication system, advanced pneumatic setup • Large PROMATEC (F) coolant unit with filtration and magnetic separator • Various grinding wheels, flanges, table segments, transport discs, large fume extraction system, etc. This machine is particularly suitable for the simultaneous plane-parallel grinding of workpieces in large series, such as stamped parts, piston rings, hydraulic parts, etc. Condition: good to very good – ready for demonstration shortly Delivery: ex stock – as inspected Payment: net – upon receipt of invoice This represents a rare opportunity regarding both condition and price. If you require another grinding machine – especially from the manufacturer DISKUS – please send us your inquiry.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, paskutinio kapitalinio remonto metai: 2004, 4 aukštų CRM Froehling valcavimo galva Froehling yra žinomas prekės ženklas, garsėjantis patikimumu ir tvirtumu valcavimo srityje. 4-auštų valcavimo galva su lenkimo funkcija ir ritiniais. Techninės charakteristikos: Gamintojas: FROEHLING (Vokietija) – Kapitalinis remontas 2004 m. Apdirbamos medžiagos: aliuminio lydiniai, žalvaris, varis, mažai anglies turintis plienas Juostos plotis: 282 mm (iki 300 mm) Juostos storis: 0,15 – 2 mm Ritės dydis: vidinis skersmuo – 400 mm, išorinis – 1500 mm Maksimalus valcavimo greitis: 400 m/min Iisdpfx Aasg Ryqkjusa Darbiniai volai: skersmuo – 130 mm, stalas – 340 mm Atraminiai volai: skersmuo – 390 mm, stalas – 335 mm Komplektacija: išvyniojimo ir suvyniojimo ritės Daug atsarginių darbinių ir atraminių volų komplektų Parduodama EXWORKS demontuota ir pakrauta ant sunkvežimio. Paruošta apžiūrai potencialiems pirkėjams. Dėl papildomos informacijos prašome susisiekti. Pateikite savo pasiūlymą, jei susidomėjote – tikrai rasime bendrą sprendimą.

Gamybos metai: 1993, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 Iiodpfx Aajcc D Ddeuea General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeder for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Chuck diameter for pull heads: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Features: The machine is equipped with a workpiece table and a pull bridge for 3 stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. The locking of the shank and end-piece holders is hydraulic. The machine comes with a coolant system with an integrated magnetic conveyor for chip removal, allowing operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale production. It is in very good condition and still retains its original paintwork. The machine is under power and can be inspected at our warehouse.

Būklė: naudotas, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Module – min. 0.5 Stroke length max. 0 – 52 mm Internal spindle taper MK 4 Table diameter 160 mm Table bore diameter 75 mm Stroke rate 355 – 630 strokes/min Feed range 0.008 – 0.4 mm/stroke Required space approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg Iijdpfx Ajtycg Sjauea With rack cutting attachment Change gear set Year of manufacture: approx. 1981

Būklė: paruoštas naudoti (naudotas), The machine is in very good condition and can be inspected on site. Technical Data – Grinding Machine Working area (mm): Height x Length x Depth 80 x 110 x 55 Motor power (kW): 0.5 Spindle speed (rpm): 5000 Feed rate (mm/min): 150 Table load (kg): 20 Control system: BOSCH Accuracy: 0.005 mm, read via CNC, template grinding ratios 1:10, 1:20, or 1:50, suitable for coarse grinding. Ijdpfswvgidjx Aaujia If you have any further questions, please feel free to contact me.

Būklė: naudotas, Manufacturer: CINCINNATI Iisdpfx Aewrpykoauoa

Būklė: naudotas, Gamybos metai: 2014, x eiga 400 mm Iedpfxjycxihj Aaueia y eiga 400 mm z eiga 375 mm Bendra galingumo poreikis --- kW Apytikslis staklių svoris 7,6 t Užimamas plotas apie --- m DMG MORI DMU 40 EVO (2014) X - 400 mm Y - 400 mm Z - 375 mm Heidenhain iTNC530 su matavimo zondu TS649 Veleno sukimosi greitis: 14 000 aps/min. Įrankių žurnalas 30 vnt. / Įrankių laikiklis HSK63 Juostinis filtravimo įrenginys su vidiniu aušinimu 40 BAR Įrankių žurnalas 30 vnt. Staklės sandėlyje prijungtos prie elektros tinklo. Galimas vaizdo įrašas.