Siūlių suvirinimo aparatas

Kahramansan Teknoloji KMD20

Sąlyga: naujas, Thread diameter: M3 - M16 mm Infinitely variable speed, max. 187 rpm Working range: 180 - 2000 mm Motor power: 0.7 kW Electric tapping machines for thread sizes M3 - M16, adjustable angle. Includes 9 quick-change chucks with slip clutch. Adjustable via display: Variable speed, adjustable depth, material selection, selection of main rotation direction, thread selection. Optional accessories: Ncedpfxefg U Sqs Af Isl Clamping table with T-slots: 990x700x800 mm Magnetic base Also available for: M14 to M24 and M27 to M33.

Sąlyga: naudotas, Gamybos metai: 1977, Pressure: 250 t Stroke: 40 - 190 mm Stroke rate: 40 /min Throat depth: 500 mm Clearance between frame sides: 1050 mm Installation height: 615 mm Table size: 1380 x 880 mm Pass-through opening in table: 450 mm Table height above floor: 800 mm Ncjdpfx Ajvuuaief Iel Ram area: 1200 x 800 mm Ram adjustment: 125 mm Drive power: 22.0 kW Weight: 24.0 t Required floor space approx. 2.0 x 2.5 x 3.95 m (L x W x H) Approved for manual feeding operations in compliance with German accident prevention regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, clamping plate, two-hand control.

Sąlyga: geras (naudotas), Gamybos metai: 2002, From business closure: Njdpfet Iklkex Af Iocl Peddinghaus Peddimax 1002 Year of manufacture: 2002 Max. punching and shearing capacity: 1,000 kN Punches 31 mm holes in 25 mm steel Shears flat bar up to 500 mm length with a material thickness of up to 18 mm steel Contact length stop included A wide range of accessories (special punches) Special punching device SV 90 for holes up to 90 mm Weight: approx. 3,000 kg

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Technical Data: Cone Rolling Machine Working width: 1050 mm Njdpfsw An Uhsx Af Ijcl Max. bending capacity for mild steel St40: 4.0 mm Diameter of conical top roll: 70 - 185 mm Diameter of side and central lower rolls: 105 mm Conical bending device Mobile control panel with digital display Hydraulic drop-end bearing CE marking Motor power: 5.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tons Condition: Very little used, as new condition The seller does not assume liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any guarantee.

Sąlyga: naudotas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: TET351P5-offAD-Bypass - 2200373733, vėsinimo galia: 66 kW (89,73 AG), įvesties srovės tipas: trifazis, aušinimo tipas: vanduo, bendras svoris: 1 082 kg, aplinkos temperatūra (maks.): 46 °C, aplinkos temperatūra (min.): −5 °C, įėjimo įtampa: 400 V, slėgis: 6 juosta, temperatūra: 7 °C, tūrio srautas: 11,2 m³/val, siurblio slėgis: 4,68 juosta, bendras plotis: 866 mm, bendras ilgis: 2 250 mm, bendras aukštis: 2 054 mm, garantijos trukmė: 3 mėnesiai, įėjimo dažnis: 50 Hz, Įranga: Tipinė plokštelė prieinama, Process chiller / air-cooled water chiller, Type: TAEevo Tech 351 P5-offAD-Bypass MTA S.p.A. Chiller, Water Chiller; Cooler TAEevo Tech 351 P5-offAD-Bypass are air-cooled, compact water chillers suitable for outdoor installation down to -5°C. Features include crankcase heater, electronic expansion valves, phase monitoring, 350-liter buffer tank, and built-in P5 high-pressure pump. Special equipment: - Open filling system / integrated tank - Manual bypass valve between water inlet and outlet Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 66 kW Chilled water outlet/inlet temp. (°C): 7 / 12 Flow rate (m³/h): 11.2 Available pump pressure (bar): 4.68 Ambient temperature (°C): 32 Refrigerant: R410A Electrical Data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power consumption (kW): 39 Max. current (A): 68 Starting current (A): 213 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 1082 Connection: Rp 2" Serial number: 2200373733 Year of construction: 2021 Condition: Visually grade 2, Technically OK Ncedpfx Afjwlt Raj Iol Used (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 88131 Lindau Used machines may have visual defects due to usage. (Technical modifications and prior sale reserved!)

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 100 mm, maks. lakšto storis: 50 mm, plieno lakšto storis (maks.): 50 mm, bendras ilgis: 2 210 mm, bendras plotis: 1 530 mm, bendras aukštis: 1 940 mm, bendras svoris: 1 200 kg, įėjimo įtampa: 400 V, ruošinio aukštis (maks.): 50 mm, galia: 6 kW (8,16 AG), įėjimo srovė: 18 A, Edge rounding up to 1100mm width. Ideal for edge rounding of light burrs up to 1100mm working width. The DM1100 C performs edge rounding and removes sharp edges on both outer and inner contours of stainless steel, steel, or aluminum parts that have been cut by laser, shear, or punch machines. This machine processes parts of various sizes, including products starting from 50x50mm. The DM1100 C is equipped with a station featuring double cross belts for edge rounding, producing clean, smooth, and burr-free edges across the entire part. DM1100 C Working capacity (mm): 1100x50 Number of cross belt stations: 1 Cross belt speed (m/s): 2-8 Feed speed (m/s): 0.6-3.2 Cross belt motor (kW): (2x) 3 Feed motor (kW): 0.18 Total power (kW): 6 Power consumption (A): 18 Exhaust connection per head (Ø mm): 150 Dimensions (mm): 2213x1530x1940 Ncsdpotzfntefx Af Iel Weight (kg): 1200

Sąlyga: naudotas, Combined Section Steel Shear and Punch GEKA Type HYD 80 / Hydracrop 80/A Machine No. 9566 Year of manufacture approx. 2000 Punching force: 80 tons Throat depth: 300 mm Punching up to Ø 40 mm in 14 mm sheet Flat bar shear: 450 x 15 mm Angle steel shear: 130 x 130 x 13 mm Square bar shear: 45 x 45 mm Round bar shear: Ø 45 mm Rectangular notcher: up to 12 mm Motor power: 5.5 kW Nodpfx Ajrz Tutjf Iscl Power supply: 400 Volt, 50 Hz - Stop with electric stroke release, 500 mm - Worktable with stop at punching station: 550 x 380 mm - Working height at punching station: 1100 mm - Worktable with stop at rectangular notcher: 550 x 400 mm - Working height at rectangular notcher: 930 mm - Approx. 21 assorted punching tools - Operating manual - Original paint, not repainted Space requirements (L x W x H): 1800 x 1150 x 1950 mm Weight: 1.7 tons Very good condition

Gamybos metai: 1996, Sąlyga: labai geros būklės (naudotas), Usada prensa plegadora CNC hidráulica de descenso Trumpf serie V, muy limpia y bien mantenida, en venta Trumpf V85 2 metros x 85 toneladas – prensa plegadora CNC de 4 ejes en buen estado – vídeo disponible al final del anuncio Marca: Trumpf Modelo: Trumabend V85 Año: 1996 Fuerza máxima de prensado: 850 kN / 85 toneladas Carrera máxima: 215 mm Tiempo de frenado: 79 ms Total de ejes: tope trasero de 2 ejes / total de ejes: 4 – Y1, Y2, X, R e i Se entrega completa con: Nedpfei Igi Ssx Af Iecl • Luz libre (Daylight): 390 mm • Tope trasero de 2 ejes • Eje i – la base inferior se desplaza para utilizar matriz multi V doble sin que el operario tenga que mover o cambiar la herramienta • Totalmente revisada / En buen estado

Sąlyga: naudotas, Mitre Cold Circular Sawing Machine Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of Manufacture 1983 Saw Blade Diameter: 400 mm Cutting Capacity at 90° Round: Ø 130 mm Cutting Capacity at 90° Square: 120 x 120 mm Cutting Capacity at 90° Rectangle: 305 x 20 mm Cutting Capacity at 45° Round: Ø 130 mm Ncsdpfxjd N H A Ne Af Iel Cutting Capacity at 45° Square: 110 x 110 mm Cutting Capacity at 45° Rectangle: 245 x 30 mm Clamping Range, Vice Feed: 30 to 140 mm Working Height: 1000 mm Mitre Cutting: 0 - 180° Feed Travel: 600 mm Saw Blade Speed: 10 + 20 m/min, 2 stages Motor Power: 1.7 and 2.6 kW Hydraulic Motor: 1.5 kW Electrical Connection: 380 Volt, 50 Hz - Hydraulic material vice feed with 1500 mm infeed roller conveyor on the left - Dual-stage feed travel up to 1200 mm (feed twice, then saw) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut – saw angle adjusted manually - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for saw blade speed - Infinitely adjustable saw blade stroke - Coolant system with electric pump integrated in machine base - Hydraulic unit fixed on the base machine - Piece counter with zero reset Space requirement of saw: 2600 x 1200 x 1900 mm Weight of saw: approx. 1400 kg In good condition

Gamybos metai: 1965, Sąlyga: naudotas, Pressure: 150 t Throat depth: 550 mm Stroke: 10 - 140 mm Table area: 1180 x 980 mm Strokes per minute: 40 spm Installation height: 500 mm Ram area: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirement: approx. 3 x 1.7 x 3 m - with auxiliary brake Ncedpfx Ajcubatof Isl - Ram weight compensation - Motorized ram adjustment - Centralized grease lubrication (manual) - Break-out plate - T-slot clamping plate - Safe for manual loading operations - Operating manual available