Įrankių šlifavimo mašina

Jungner US450 US2305

Būklė: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine previously supplied with 1000 mm centres. -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. -Digital display in 2 axes. X-axis resolution 0.5 µm Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping sleeve for chuck Additional accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: -Semi-automatic dressing cycles for external and internal grinding Bsdeuxft Eopfx Af Ajwl -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Gamybos metai: 1992, veleno greitis (min.): 7 500 aps./min, veleno greitis (maks.): 24 000 aps./min, 4 motor-driven grinding spindles (liquid-cooled, with sealing air / oil mist lubrication) including REFU HF frequency converter, e.g., for supplying the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 Bedol Tn Afepfx Af Aewl 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Converter 316/25 High-frequency converter (inverter, frequency inverter) Frequency converter / inverter for the power supply of motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional, sold as-is – year of manufacture approx. 1992. A collection of various grinding spindle shafts / arbors for grinding wheels are available for these grinding spindles and can be purchased separately. Price / details on request. All technical details are subject to errors or omissions. We sell exclusively to countries within the European Community.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, veikimo valandos: 8 100 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2066-5172, Įranga: dokumentacija / vadovas, CNC Tool Grinder WALTER HELITRONIC ESSENTIAL – Year of Manufacture 2016 For sale: a 5-axis CNC tool grinder from the renowned manufacturer Walter Maschinenbau GmbH. The machine is designed for precision machining of cutting tools such as milling cutters, drills, as well as special and multi-edge tools. The device is fully operational, regularly serviced, and has been maintained in excellent technical condition. BASIC DATA Model: WALTER HELITRONIC ESSENTIAL Year of manufacture: 2016 Control: FANUC Number of axes: 5 Operating hours: 8,100 h Power supply: 3 x 400 V AC, 50/60 Hz Connected load: 25 kVA TECHNICAL SPECIFICATIONS Working travels: X = 330 mm Y = 213 mm Z = 475 mm Feed rates for X, Y, Z axes: 15 m/min A-axis: 360° C-axis: ±200° Spindle speed: 10,500 rpm Spindle motor power: 9 kW Spindle diameter: 70 mm Max. grinding wheel diameter: 150 mm Max. workpiece length (cylindrical grinding): 255 mm Max. workpiece length (face grinding): 185 mm Max. grinding diameter (complete machining): 100 mm Minimum operating pressure: 6 bar Air consumption: 8,000 l/h Coolant pump capacity: 80 l/min at 7 bar Coolant tank capacity: 350 l Machine weight: 3,300 kg Software: Tool Studio version 2.1 EQUIPMENT AND FEATURES Automatic loading arm The machine is equipped with an automatic tool loading system. The loading arm picks tools from the input tray, positions them for processing, and then places the finished tools onto the output tray. This enables fully automated, uninterrupted production without constant operator supervision. Possibility to mount two grinding wheels Simultaneous mounting of two grinding wheels increases working flexibility, reduces setup times, and enables more complex operations without frequent tool changes. Electric cabinet cooling HAOSCH cooling unit included. Additional equipment Bwjdpfx Afjyz Dwco Asl Professional measuring device for cutters and drills, ensuring fast, precise, and repeatable measurements and facilitating tool setup prior to machining. TECHNICAL CONDITION The machine is in very good technical condition Operated in clean production conditions Fully enclosed work area for safety and noise reduction Regularly serviced.

Būklė: geras (naudotas), Gamybos metai: 2013, Šlifavimo skersmuo 140–355 mm Šlifavimo ilgis 3000 mm Centro aukštis 260 mm Staklių svoris apie 8,3 t Reikalinga erdvė apie 8500 x 3500 mm 2013 m. pilnai renovuotos, sumontuota nauja Siemens S7 PLC valdymo sistema. Bepakopės apsukos, balansavimo blokas, Bwedpfoynmpyex Af Ajl Išorinė apvalaus paviršiaus šlifavimo staklės SA 6Ux3000 Gamybos metai: 1981 Retrofit 1x 2013 SERWEMA Maks. šlifavimo skersmuo su centravimo atrama: 140 mm Maks. šlifavimo skersmuo be centravimo atramos: 355 mm Maks. šlifavimo ilgis: 3000 mm Centro aukštis: 260 mm Maks. ruošinio svoris: 500 kg Staklių užimama vieta: 8500 x 3500 mm Staklių svoris: 8500 kg

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 750 kg, X ašies eiga: 350 mm, Y ašies eiga: 220 mm, Z ašies eigos atstumas: 220 mm, tuščias svoris: 2 450 kg, Charmilles Robofil 240 Year of manufacture: 2001 Travel distances (X / Y / Z): 350 x 220 x 220 mm Travel distances (U / V): 350 x 220 mm Max. taper angle: +/- 30° at 220 mm height Integrated Collision Protection (ICP) on all 5 axes Max. workpiece dimensions: 1000 x 550 x 220 mm Max. workpiece weight: 750 kg Cutting speed up to 300 mm²/min Best surface finish: Ra 0.22 µm Available wire diameters: 0.10 mm to 0.33 mm Bwjdpfx Afowqdrrs Ajl Dimensions of the complete unit: 2020 x 2050 x 2000 mm Total weight of the unit: 2450 kg The machine is cleaned, overhauled, and tested by us prior to delivery. We are pleased to offer you commissioning of the machine upon request.

Būklė: naudotas, Gamybos metai: 2003, CNC įrankių galąstuvė Schneeberger NORMA CFG Pagaminimo metai: 2003 Centru aukštis: 210 mm Stalo ilgis: 950 mm Stalo plotis: 310 mm X ašies eiga: 380 mm Y ašies eiga: 280 mm Z ašies eiga: 280 mm Šlifavimo disko skersmuo: 50–200 mm A ašis, šlifavimo galvos rotacija: 360° C ašis, įrankio rotacija: 340° C ašies verpstės rezoliucija: 0,001° Įrankio tvirtinimas: HSK 50 Šlifavimo verpstės greitis be pakopų: 0–9000 aps./min. Hidraulinė sistema: 6 bar Maitinimo įvadas: 3×400 V / 50 Hz Verpstės galia: 7,5 kW Bendras energijos poreikis: 33 kVA Staklių svoris: apie 5500 kg Bwedpsxz R T Usfx Af Ael Staklių matmenys Ilgis: 1930 mm Plotis: 1590 mm Aukštis: 2250 mm Valdymas: GE Fanuc Series 16-M Priedai: įvairūs šlifavimo disko laikikliai ir įrankių laikikliai Maks. darbinė srovė: 3×40 A Už pateiktos informacijos teisingumą, pilnumą ir aktualumą neatsakome.

Būklė: naudotas, Gamybos metai: 1998, Bore diameter: 90 mm Stroke: 490 mm Throat depth: 400 mm Total connected load: 10 kW Machine weight approx. 3,500 kg Space requirement approx. m KADIA Vertical Honing Machine Model: VZH 90 / 450 F Year of manufacture: 1998 Serial no.: 50 / 1790 _____ Max. honing diameter: 10 - 90 mm Max. honing depth: 30 - 450 mm Max. spindle stroke: 490 mm Spindle throat: 400 mm Mounting height under spindle nose top approx.: 1,200 mm Table size approx.: 400 x 600 mm Max. workpiece diameter approx.: 700 mm Spindle speeds, infinitely variable: 160 – 830 rpm Stroke speed, infinitely variable: 25 mm/min Spindle drive: 4.5 kW Total drive: 10 kW - 400 V - 50 Hz Weight approx.: 3,500 kg Overall machine height approx.: 4,000 / 3,300 mm Accessories / Special equipment: Bedpfx Ast Hw T Sef Aowl • Machine equipped with SIEMENS S5 / Unipos 4.0 PLC for entry of all key honing parameters such as tool speed, stroke length, expansion, honing time, fault messages, etc. • With a fixed table 600 x 400 mm • Automatic shut-off after a preset time, followed by spindle return • Automatic motorized expansion of the honing tool via electromechanical feed head ESZ 90/1 D • Separate hydraulic unit, central lubrication, workpiece clamping device on the table • Currently no suitable coolant system, no honing tools included. Condition: good to very good - ready for demonstration Delivery: ex stock - as inspected here Payment: strictly net - upon receipt of invoice

Būklė: naudotas, Gamybos metai: 1990, Grinding length 1500 mm Grinding width 550 mm Workpiece height 400/450 mm Table size 1900 x 450 mm Table speed 1 - 25 m/min Automatic cross feed 0 - 60 mm/stroke Bjdpswlvirofx Af Aewl Grinding wheel dimensions 400 x 100 x 127 mm Grinding spindle speed 1400/2800 rpm Total power requirement 15 kW Voltage 380 V Machine weight approx. 5 t The machine was overhauled in 2015 and retrofitted with a modern control system. Equipped with coolant system, automatic vertical infeed, wheel dressing device, and wheel mounts.

Būklė: naujas, Gamybos metai: 2026, Grinding of curved materials using a side table Simple and quick sanding belt replacement via a lever Movable sanding unit allows for horizontal and vertical operation Additional height-adjustable table included as standard Tensioning device ensures even belt tension Compact machine dimensions with a wide range of applications Technical data: Belt size [mm]: 2010 x 152 Worktable size [mm]: 790 x 221 Table height [mm]: 810 Stand height [mm]: 600 Auxiliary table size for rounding [mm]: 514 x 221 Maximum grinding length [mm]: 790 Extraction port diameter [mm]: 100 Face and edge grinding angle [°]: 0 - 45 Belt speed [m/min]: 840 Motor power [kW]: 1.1 Power supply [V]: 400 Weight [kg]: 75 Bsdpfx Ajvuggzef Aswl The stated price is net. Transport costs are not included.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Maximum load, cantilevered: 1000 N / 100 kg Maximum load between centres: 3000 N / 300 kg Z-axis Table swivel range: 10° Table drive, hydraulic: 0–4 m/min X-axis Longitudinal travel (infeed spindle): 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment (air cushion): 280 mm Infeed drive via DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: plunge grinding / longitudinal grinding 4 presettable feed rates: mm/min/Ø: 0.01–48 4 presettable infeed amounts: mm: 0.001–0.1 Spark-out during stop grinding: s: 0–99 / 0–99 strokes Jog infeed: mm/Ø: 0.001 Universal swivelling grinding spindle head: 0–180° Grinding wheel (external): D x width x bore: 500 x 100 x 127 or 203.2 mm Grinding wheel (face, optional): D: 250 x 32 x 76.2 mm Grinding wheel (internal, optional): D: (2–250) mm Drive power (external, face): 5.5 kW (7.5 kW) Drive power (internal): 2.2 kW Peripheral speed (external): 35 (50) m/s Grinding wheel wear (external): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece spindle head: Infinitely variable drive: Mk 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Workpiece headstock swivels on rotary part: 0–90° Tailstock: Quill mounting / quill diameter: MK 4 / 750 mm Quill stroke: 45 mm Quill force: 100–800 N / 250–1400 N adjustable Bwodpjtqf Rzefx Af Aol Quill operation: manual (foot switch) Quill fine adjustment: ±40µ Connections: Total connected load: 6.5–10 kW Grinding spindle head: 5.5 (7.5) kW Workpiece spindle head: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Guideway lubrication pump: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 litres Pneumatics: 6 bar Comparable to Weiss, EMAG, GP cylindrical grinding machines, Studer, Kellenberger, Schaudt, Tschudin, Tacchella, Dannobat.