Paviršiaus šlifavimo mašina

Jung HF-40

Sąlyga: naujas, Pre-bending: 6.0 mm Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » at 3x top roll diameter Pre-bending: 6.0 mm » at 1.5x top roll diameter Top roll diameter: 230 mm Bottom roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital readout for side roll positions Rbedped Ab H Hefx Ah Hjt • Hydraulic drop-end bearing • Device for conical bending • Hardened rolls • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torque shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment comply with CE regulations Catalog available at the following link: Important points for conical rolling: • The maximum sheet thickness is 50% of the nominal capacity • The cone length must be a maximum of 30% or more than 60% of the roll length • Hardened rolls are recommended

Sąlyga: naudotas, Gamybos metai: 1969, Grinding length 500 mm Grinding width 200 mm Workpiece height 250 mm Total required power 5.5 kW Machine weight approx. 2500 kg Space requirements approx. m J U N G Horizontal Precision Surface and Profile Grinding Machine Model HF 50 RD Year of manufacture approx. 1969 Machine No. 4082 _____ Maximum grinding length 500 mm Maximum grinding width 200 mm Table size 600 x 200 mm Table speed 1 – 20 m/min Working height under grinding wheel approx. 350 mm Grinding wheel size 225 x 25 x 51 mm Grinding wheel speed, infinitely variable 1,000 - 4,500 rpm Vertical infeed 0.001 - 0.01 mm/stroke Grinding spindle drive, continuously adjustable 0.5 to 1.5 kW Total drive power approx. 6 kW - 380 V – 50 Hz Weight approx. 2,500 kg Accessories / Special Equipment • This version, due to the infinitely variable speed range, is particularly suitable for grinding high-alloy tool steels. • Automatic infeed of the grinding carriage for surface and profile grinding operations with automatic infeed shut-off via dial indicator, Rodpfx Ahet Hwzie Hobt as well as with dial indicator holder and dial indicator for height control. • Machine can be set for standard grinding operations with and without infeed, either with continuous cross movement or with table reversal, or for plunge grinding operations without cross adjustment. • Manual straight dresser mounted above the grinding wheel • Mounted permanent magnetic chuck approx. 400 x 200 mm, tiltable • Separately standing wet grinding unit with coolant tank and belt filter • Separate converter cabinet for infinitely variable speed regulation and display of cutting speed. • Approx. 3 flanges with and without grinding wheels, rapid grinding head traverse, Condition : good – ready for demonstration under power, partially overhauled by specialized company (piston rods, lubrication, infeed, dresser, bellows, etc.) Delivery : ex stock – as inspected Payment : strictly net – upon receipt of invoice

Sąlyga: naudotas, Vielinio erozinio pjovimo staklės FANUC ROBOCUT ALPHA-0iE Rbsdpfxsxqrqae Ah Hst

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2001, GRAŽUS ĮRENGINYS, ATNAUJINTAS Rbsdpfxexc Elhs Ah Hot

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3806, šlifavimo ilgis: 600 mm, šlifavimo plotis: 250 mm, šlifavimo disko skersmuo: 250 mm, šlifavimo veleno greitis: 3 000 aps./min, galia: 3,5 kW (4,76 AG), Įranga: sūkių greitis be galo kintamas, JUNG JF520 – workshop-refurbished Mechanically and electrically inspected and function-tested by our JUNG specialists Wearing parts replaced Geometry overhauled according to the JUNG new machine protocol - Grinding area: 600 x 250 mm - Stepper motor infeed - 3-axis HEIDENHAIN digital readout - Dressing compensation - Magnetic force control - Automatic central lubrication - Used magnetic chuck - Used paper band filter Rbsdpfx Aswz Hf Neh Het 6 weeks parts warranty Delivery time: short-term We are happy to accept your used JUNG grinding machine as trade-in.

Sąlyga: naudotas, Gamybos metai: 1985, Grinding length: 600 mm Grinding width: 200 mm Total power requirement: 7.5 kW Machine weight approx. 2.3 t O F F E R We can offer you, subject to prior sale and errors excepted, from stock on a non-binding basis: JUNG Horizontal Precision Surface & Profile Grinding Machine with Microprocessor Control Model: JF 520 MS Year of manufacture: 1985 2225 ----- Max. grinding length (table longitudinal travel): 600 mm Max. grinding width (cross travel): 200 mm Max. grinding height under the wheel approx.: 230 mm Max. distance table to spindle centre: 500 mm Magnetic chuck size: 500 x 200 mm Max. table load: 100 kg Table speed: 1 – 24 m/min Table speed, creep grinding: 5 – 450 mm/min Max. table cross feed: 1,000 mm/min Max. vertical feed grinding head: 500 mm/min Grinding wheel dimension: 250 x 25 x 50.8 mm Max. peripheral speed (ceramic): 35 m/s Grinding spindle speed, infinitely variable: 800 – 4,200 rpm Grinding spindle drive approx.: 5 kW Total connected load: approx. 7.5 kW - 400 V - 50 Hz Rbjdpfx Ajwd Tx Uoh Hst Weight: approx. 2,300 kg Accessories / Special Equipment: • Microprocessor program control (SIEMENS) with easy screen display. The program sequences are set via decade switches and stops (with vernier) and monitored on the screen. • Programs: plunge grinding with/without cross positioning, surface grinding with step-over or continuous cross feed, creep feed grinding upcut or downcut with/without cross positioning. All programs with automatic roughing, finishing, spark-out cycles, and automatic retraction. • Automatic straight line dressing device AF 65 S with automatic dressing value compensation and automatic speed adjustment for constant cutting speed (with display) • DIAFORM – grinding wheel profiling device mounted above the grinding wheel • Electrically controlled creep feed device with feed rate and motor load display • Short stroke device for controlling table reversal and table clamping (cross) • Swivelling JUNG sine magnetic chuck, 450 x 180 mm, mounted. Separate swivelling sine magnetic chuck 350 x 175 mm, fine-pole with stop • Coolant system with paper band filter, additional accessories, operating manual Condition: Very good condition with accuracy protocol by JUNG technician! Please click here for a video of the machine: Delivery: ex stock, immediate availability, FCA Metzingen Payment: strictly net - upon receipt of invoice

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, pjovimo plotis (maks.): 300 mm, pjovimo ilgis (maks.): 300 mm, pjovimo aukštis (maks.): 508 mm, Įranga: dokumentacija / vadovas, Trilaterinis Horizon modelis HT 70 su vadovais ir priedais. 2 komplektai peilių. Redsxcupiopfx Ah Hjbt

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, SERDI Ventilsitz-Fräsmaschine für Zylinderköpfe – Gebrauchtmaschine, in sehr gutem Zustand, sofort einsatzbereit Technische Daten: Abmessungen (L x B x H): 1690 x 1050 x 2170 mm Eigengewicht ca.: 1.085 kg Max. Zylinderkopf-Abmessungen (L x B x H): 1200 x 500 x 450 mm Querschwenkung des Werkstücks: +42° bis -15° Min.-Max. Bearbeitungskapazität: 16 – 70 mm Verfahrwege des Arbeitskopfes: längs: 930 mm quer: 40 mm Kugel-/Zylinderverstellung (Radius): 9 mm Spindel: max. Spindelneigungswinkel: 5° Hub: 200 mm Motorleistung: 1.200 W Drehzahlbereich: 100 – 1.200 U/min Anschlüsse: Stromanschluss: 2,5 kVA – 230 V – 1 Ph – 50/60 Hz Rjdpfxev Ild So Ah Hebt Druckluftversorgung: 6 bar Luftvolumen: 300 l Geräuschpegel bei 400 U/min: 72 dBA, bei 1.200 U/min: 82 dBA Bei Interesse kontaktieren Sie mich gern! Weitere Maschinen im Angebot: A-M, Serdi, Comec, AMC, Carmec, Kwik-Way, Serdi, PEG Kurbelwellen-Schleifen, Flachschleifen, Ventilschleifen, Ventilsitzfräsen, Druckprüfung, Teilewaschen, Hauptlagergassenbearbeitung, Ventilführungs-Pressen, Vakuumtester

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, perforavimo jėga: 18 t, darbo diapazonas: 30 001 500 mm, X ašies eiga: 3 000 mm, Y ašies eiga: 1 600 mm, Parduodama labai gerai prižiūrėta ir visiškai aptarnauta naudota didelio formato Trumpf 3000 CNC štampavimo staklės Rbodpexrnggefx Ah Hst Gamintojas: TRUMPF Modelis: TruPunch 3000 (S11) Metai: 2012-11 Darbinis plotas: 3000 x 1500 mm – be perstatymo Darbinis diapazonas skersai (X ašis): 3000 mm Darbinis diapazonas išilginis (Y ašis): 1600 mm Didelė tarpiklio gylis: 1600 mm Komplektuojama su multi įrankių sistema Tipas: S11 Vaizdo įrašas pateikiamas pagal užklausą

Sąlyga: naujas, Column Drilling Machine Make: MAXION Model: UNIMAX 3 AVG Condition: New machine Spindle speed (stepless): Range A: 80 - 1,440 rpm Range B: 180 - 3,200 rpm Standard drilling capacity: 30 mm Standard equipment includes: Redpfxjbrfmke Ah Hsbt - Stepless feed adjustment - Stepless speed control - Digital display for speed, feed rate, and drilling depth - Automatic tool ejector - Operating manual Available with the following option: - Tapping unit