Paviršiaus šlifavimo staklės

Jones and Shipman 540P Surface Grinder

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1761-1700, 457 x 152 mm darbinis dydis. Su įrengta magnetine plokšte, varomuoju galvutės aukščio reguliatoriumi, stalviršio apsauga, aušinimo sistema ir dulkių šalinimu. SPECIFIKACIJA Jones & Shipman Modelis 540P Stalviršio darbinis paviršius: 457 x 152 mm Stalviršio išilginis eiga, rankinė ir hidraulinė: 483 mm Bendra skersinė eiga, rankinė ir hidraulinė: 168 mm Aukštis nuo grindų iki stalo: 1035 mm Stalviršio eigos greičio intervalas per min: 1,5 – 18 m Skersinės eigos diapazonas per eigą (kiekvieną persukimą): 0,178 – 1,78 mm Mikrometrinis skersinės eigos reguliavimas, padalos: 0,002 mm Veleno galvutės vertikalus judėjimas (maks.): 280 mm Šlifavimo galvutės veleno centras iki stalo (min.): 50 mm Šlifavimo ratuko dydis: 180 x 13 x 31,75 mm (vidinis) Ratuko greitis: 2880 aps./min. Šlifavimo galvutės variklis: 1,5 kW Hidraulinės pompos variklis: 0,55 kW Mašina pagaminta imperialiniu matavimu ĮRANGA Magnetinė plokštė Varomas galvutės aukščio reguliatorius Stalviršio apsauga Gsdpfxjnxi Uuj Afdobn Ratuko apsauga Aušinimo sistema Dulkių šalinimas

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, Pjovimo skersmuo 128 mm Gbodpfoxbh Hfsx Afden Juostinio pjūklo ilgis / mm Stalo aukštis / mm

Būklė: naujas, Cutting capacity at 90 degrees: round 240 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 165 x 310 mm Saw blade length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight: approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Coolant pump - Eccentric vice - Base frame Gedpohpktvsfx Afdobn - Saw blade - 400V plug (16A) The machine is delivered fully assembled and ready for immediate operation.

Būklė: geras (naudotas), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre Height: 125 mm Distance Between Centres: 400 / 700 / 1025 mm Maximum Longitudinal Slide Travel: 400 / 700 / 1000 mm Longitudinal Slide Table Speed: 50 – 5000 mm/min Reversal Delay: 0-6 s Minimum Automatic Travel: 1.5 mm Max. Travel: 400 / 700 / 1020 mm Max. Table Swivel: 12 / 30 / 78° Cross Slide Swivel Range: ±45° Rapid Adjustment: 40 mm Feed Travel with Handwheel: 20 mm Maximum Plunge Depth: 1.7 mm Grinding Spindle Headstock Grinding Wheel Diameter x Width x Bore: 450 x 80 x 203 mm Rotational Speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse Adjustment: 210 mm Workpiece Headstock Swivel Range: 0 – 90° Speed Range: 30 – 675 rpm Taper Mount: Morse 5 Collets: W25 Tailstock Taper Mount: Morse 3 Godpfxsvca Izj Afdjbn Quill Travel: 30 mm Total Power Requirement: 5 / 8.25 kW No liability is accepted for the correctness, completeness or accuracy of the information provided.

Būklė: naujas, Gamybos metai: 2024, pjovimo aukštis (maks.): 150 mm, Apvalaus plieno pjovimo diapazonas ties 45°: 108 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 108 mm, BERG+SCHMID Double Mitre Bandsaw GBS 218 Eco AutoCut Cutting speed: 25-80 m/min Gbjdpfx Afot I R Edsdsn • Mitre angle left: 60° • For cutting steel, stainless steel, and aluminium profiles • Quick-release vice with fast clamping device • Integrated blade tension control • Carbide blade guides • Electric coolant system • Machine base supplied disassembled The AutoCut system consists of: • Hydraulic cylinder, feed control, spring assembly, limit switch, and enables three operating modes: 1. Automatic saw frame lowering via hydraulic cylinder with infinitely adjustable feed control valve and limit switch at end of cut 2. Rapid lowering of the saw frame from rest position to the workpiece, then switching to normal feed rate 3. Manual operation – hydraulic cylinder functions as a brake cylinder Saw blade dimensions: 2455x27x0.9 mm Additional accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication, etc., available on request! Delivery time: from stock Waiblingen Beinstein

Būklė: naujas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Stock machine "NEW" – available at short notice! (subject to prior sale) Control Unit: FANUC 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC storage LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Travel Ranges: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear Guides & Speeds: Ball guides on X/Y axis Roller guides on Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate when milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool Magazine (CAM-Type) / Changer: Number of magazine positions: 30 System: random access Max. tool diameter: Ø 75 mm Gsdpjifn N Nefx Afdsbn Max. tool diameter with adjacent empty slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/continuous): 18.5/11 kW 15,000 rpm direct drive spindle Spindle oil cooler Coolant, Chip, and Compressed Air Management: Coolant system incl. 300-liter tank and pumps External coolant around the spindle Chip augers right and left in the machine bed Compressed air nozzle on the spindle (M32/M33) Compressed air through the spindle (M38/M39) Compressed air and coolant gun Other Features: Swiveling control panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger on control cabinet Auto power OFF function Hand tool set Signal beacon Transformer 400 VAC, 50 Hz CE Declaration of Conformity in accordance with European directives Electrical and Pneumatic Requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required footprint: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Special Equipment Included: Spindle: - Direct drive spindle SK-40, 15,000 rpm - Drive power (30min/continuous): 18.5 / 15 kW, (FANUC motor) Tool Magazines / Changers: - Drum magazine with 30 stations, DIN69871, SK-40 Rotary or Additional Axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, Chip, and Compressed Air Management: - Bed flush - CTS coolant pump with 20 bar pressure for direct-drive spindles - incl. cartridge filter - Belt-type chip conveyor incl. chip trolley (chip discharge to front on left machine side) Measuring and Monitoring Systems: - RENISHAW OMP-60 touch probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ laser tool measurement system and tool breakage control in the machine, incl. mount - Auto door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown with RoboJob Mill Assist 25kg (year 2025 – NEW) - Full enclosure - Double gripper Available immediately

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus,

Būklė: labai geros būklės (naudotas), Maximum swing over bed: 575 mm Maximum swing over carriage: 525 mm Maximum swing over cross slide: 300 mm Gbjdpfx Ajwlgdysfden Distance between centers: 2000 mm Spindle bore diameter: 51 mm Number of spindle speeds: 18 Spindle speed range: 32 to 2500 rpm Bed width: 400 mm Maximum cross slide travel: 305 mm Maximum top slide travel: 140 mm Maximum tailstock quill travel: 150 mm Overall dimensions: 3405 x 1175 x 1345 mm Machine weight: 2200 kg

Gamybos metai: 1980, būklė: geras (naudotas), A used, very well-preserved cycle-controlled lathe from Weisser Heilbronn with SIEMENS control system. Centre distance: 2000 mm Centre height: 295 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Swing diameter in gap: 800 mm Total length of gap: 375 mm Bed width: 450 mm Cross travel X-axis: 350 mm Longitudinal travel Z-axis: 1850 mm Spindle nose DIN 55022 Size 8 Number of spindle speeds: 18 (14 – 1400 rpm) Spindle bore: 71.5 mm Diameter of front bearing: 110 mm Gbedpfx Asgyy I Ajfdsn Feed range: 0.01 – 40.95 mm/rev Rapid traverse: 8 m/min DC drive: 15 kW 400V 50Hz Max. permissible spindle torque: 2500 Nm Tailstock quill: 80 mm Quill stroke: 250 mm Quill taper: MT 5 Dimensions (L x W x H): Machine weight: 5500 kg Accessories: Tailstock Pneumatic 3-jaw chuck with exchangeable jaws, 315 mm Quick-change tool holder "MULTIFIX" in front of the centre, size "C" 4-position turret behind the centre Tool holders Coolant system Follow rest, pneumatically operated Technical data and specifications are subject to change without notice. Video conference via WhatsApp available by appointment.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, Funkcionalumas: ribota funkcionalumas, šlifavimo ilgis: 450 mm, šlifavimo plotis: 150 mm, stalo ilgis: 450 mm, stalo apkrova: 120 kg, stalo plotis: 150 mm, šlifavimo veleno greitis: 3 000 aps./min, Plokščio šlifavimo staklės iš parodų salės (naujos) Gamintojas: Okamoto Tipas: ACC-450 AV (atviros konstrukcijos) Pagaminimo metai: 2022 Valdymas: Okamoto FX Darbo valandos: 0 Serijos numeris: XXXX Techniniai parametrai: ----- - Stalo dydis: 450x150 mm - Stalo judėjimas ilg./skers.: 530x165 mm - Maks. stalo apkrova: 120 kg Gedpfxsx U Daws Afdsbn - Maks. šlifavimo aukštis nuo stalo / nauja šlifavimo plokštelė: 397,5 mm - Standartinė magnetinė tvirtinimo plokštelė: 450x150 mm (P=13 mm) - Automatinis padavimas: 0,0001–0,030 - Rankinis mikro padavimas: 0,0001 / 0,001 / 0,01 mm - Išlyginamieji smūgiai: 0–5 - Greitasis eiga: 600 mm/min - Šlifavimo diskas: 205 x 6–19 x 31,75 - Sukimosi greitis: 3.000 aps./min - Šlifavimo veleno variklis: 1,5 kW - Jungties galia: 7 kVA - Matmenys: 2.000 x 1.430 x 2.265 mm - Svoris: 1.250 kg Priedai: ----- - Šlifavimo diskas ant flanšo (naujas) - Popierinis juostinis filtras su 160 l baku - Stalo apdirbimo įrankis + deimantas - Darbo vietos šviestuvas - Įrankių komplektas - Eksploatavimo instrukcijos