Kitas

JCB 540-170 / 2017 BJ / 3.169 H / A/C

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, x-travel 2500 mm y-travel 3000 mm z-travel 1250 mm Control: HEIDENHAIN iTNC530 Spindle speeds – infinitely variable: 22,000 rpm C-axis: ±300° Head swiveling: ±110° Tool holder: HSK 63 A Tool changer: 50 positions Total power requirement: 130 kW Machine weight: approx. 53.5 t Space requirements: approx. 7.6 x 7.3 x 5.7 m This ZIMMERMANN FZ33c is immediately available and in good condition. - NEW spindle installed 6 months ago Description: Technical data of the unit and work areas X-axis: 2500 mm Y-axis: 3000 mm Z-axis: 1250 mm A-axis: ±110° C-axis: ±300° Including vibration sensor Including bearing temperature sensor Including rotary union for internal coolant supply (IKZ) 5-axis path control: Heidenhain iTNC 530/Handwheel HR520, 15" TFT color display Extraction system: LTA Industrial Air Cleaning Machine enclosure roof 50-position tool changer, chain magazine, rear-mounted Chip conveyor, discharge 60° to the left, front end No probe included!!! Blum Laser Tool Measurement "Control NT-Micro" Clamping table Length x width x height: 2500 x 3250 x 400 mm Table load: 8000 kg/m² (max. 16000 kg) T-slots, longitudinal: 18H12 T-slot spacing: 250 mm Dimensions, weights Required space (without peripheral equipment): approx. 7600 x 7300 x 5650 mm Total weight: approx. 53,500 kg Electrical connection values Voltage (three phase): 400 V Frequency: 50 Hz Compressed air connection (on site) Required air pressure: 6 bar Average air consumption: approx. 15 m³/h (depending on machine equipment) Linear axes drives Rapid traverse speed X-, Y-, Z-axis: 60 m/min Axis acceleration X-, Y-, Z-axis: up to 5 m/s² Rotary axes drives – VH30 Rapid traverse speed A-, C-axis: 360°/s Axis acceleration A-, C-axis: 700°/s² Resolution A-, C-axis: 0.0001 Linear axis accuracies – according to VDI / DGQ 3441 Positioning accuracy X-axis: P=0.026 mm Y-axis: P=0.028 mm Z-axis: P=0.020 mm Repeatability X-axis: Ps=0.015 mm Y-axis: Ps=0.016 mm Z-axis: Ps=0.010 mm Measuring system resolution (interpolated) A-, C-axis: 0.0001° Rotary axis accuracies – VH30 Positioning accuracy A-, C-axis: P=12" = 0.0033° Repeatability A-, C-axis: Ps=8" = 0.0022° Milling Head VH30 2-axis milling head: VH30 Milling spindle: Siemens Weiss Godpfx Ahszak Hgolsbr Spindle power S1 (100% duty cycle): 60kW Spindle speed: 22,000 rpm, 95Nm, HSK-A63 External dimensions fork head (L x W): approx. 500 x 600 mm Nominal torque rotary axes (closed loop): A: min. 1200 Nm, C: min. 1047 Nm Clamped A- and C-axis: 3000 Nm (permanent grease lubrication with automatic relubrication system) Swivel axis – spindle nose: 326 mm Tool holder: HSK 63 A Tool clamping: Spring clamp Tool unclamping: Hydraulic Permissible tool weight: 4.5 kg (manufacturer specification) Coolant supply: external and internal Coolant-lubricant supply (emulsion) at front of milling spindle with band filter system Volume: 1500 l Pump 1: 40 l/min at 20 bar Pump 2: 20 l/min at 40 bar Blow air at the front of the milling spindle

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, rida: 16 350 km, kuro tipas: dyzelinas, bendras svoris: 48 000 kg, padang padangų: 75 procentas, ašių konfigūracija: 8x4, kuras: dyzelinas, spalva: mėlyna, bendras ilgis: 16 200 mm, bendras plotis: 2 540 mm, bendras aukštis: 3 990 mm, Gamybos metai: 2019, veikimo valandos: 1 215 h, Įranga: ABS, automobilio registracija, sunkvežimio registracija, === TECHNICAL DATA === Year of manufacture: 2019 Operating hours: 1,215.6 h Mileage: 16,350.9 km Crane manufacturer: Palfinger Crane model: P 900 Chassis manufacturer: Volvo Axle configuration: 8x4 Drive: Diesel Transmission: Automatic Emission class: Euro 6 Gross vehicle weight: 48,000 kg Tyres: Continental Tyre condition: approx. 75% CE certification: Yes === CRANE SPECIFICATIONS === Crane type: Telescopic truck crane Maximum working height: approx. 90 m Maximum outreach: approx. 32.5 m Maximum lifting capacity: According to Palfinger load charts Outriggers: Hydraulic outriggers Radio remote control: Yes === HIGHLIGHTS === Carefully selected from reliable sources with traceable history CE certified including complete documentation Immediately ready for operation and transport Comprehensive technical documentation available === CONDITION === Machine in good technical condition Fully inspected and tested Viewing by appointment possible === LOCATION & PRICE === Location: Sittard, Netherlands Worldwide shipping possible Price on request, EXW, plus VAT === DESCRIPTION === Gedpfx Aheygvitelebr Heavy-duty truck-mounted crane Palfinger P 900 mounted on Volvo 8x4 chassis Ideal for professional lifting operations requiring great working height and outreach Part of a professionally maintained fleet Fully CE certified and immediately ready for use Spare parts and technical support available on request === DELIVERY === Crane loading available on request Flexible transport solutions based on destination and logistics requirements All shipments professionally handled by the logistics team of Collé Rental & Sales

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, keliamoji galia: 5 000 kg, kėlimo aukštis: 5 000 mm, kuro tipas: dyzelinas, stiebo tipas: triplex, variklių gamintojas: Yunnei EUR5, bendras aukštis: 2 650 mm, bendras ilgis: 3 900 mm, bendras plotis: 2 080 mm, Įranga: apšvietimas, kabina, oro kondicionavimas, padėklų šakės, priekinė apsauga, visų varančiųjų ratų pavara, šakės prailginimas, šoninis poslinkis, visureigis šakinis krautuvas su 4x4 pavara dyzelinis variklis EUR5 Yunnei DEF30CZEF5 74 kW 100 AG keliamoji galia 5T krautuvo svoris 7,2T triplex stiebas kėlimo aukštis 5 m pneumatinės padangos Gedpfouzivvjx Ahlobr kabina su kondicionieriumi šakių ilgis 1220 mm komplekte papildomas kaušas papildomos 2000 mm ilgio šakės krautuvas NAUJAS

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2019, veikimo valandos: 2 960 h, keliamoji galia: 3 000 kg, kėlimo aukštis: 7 000 mm, kuro tipas: dyzelinas, stiebo tipas: teleskopinis, statybinis aukštis: 2 140 mm, galia: 85 kW (115,57 AG), šakių ilgis: 1 200 mm, tuščias svoris: 6 640 kg, bendras ilgis: 4 780 mm, pavaros tipas: Diesel, statybos plotis: 2 060 mm, Rigid telehandler Load centre: 500 Mast type: Telescopic Transmission: Converter M-Varioshift Speed class: 20 km/h Condition: Ready for operation and fully functional Technical condition: Normal Front tyre type: Pneumatic Front tyre size: 405/70 R20 Front tyre condition: 60 - 80% Gbodpeytytpsfx Ahler Rear tyre type: Pneumatic Rear tyre size: 405/70 R20 Rear tyre condition: 60 - 80% 3rd hydraulic function, rear work light, front work light, heater, full cab, air conditioning, CE certificate, exterior mirrors, optional with bucket

Būklė: labai geros būklės (naudotas), rida: 450 km, galia: 75 kW (101,97 AG), kuro tipas: elektrinis, pavaros tipas: automatinis, spalva: sidabras, sėdimų vietų skaičius: 8, Gamybos metai: 2023,

Būklė: naudotas, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Production Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of manufacture: 2016, Commissioned in 2017 Gbjdot Ac Efopfx Ahlor with SIEMENS 840D SL (Solution Line) CNC path control, featuring 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swiveling gantry +/– 135° (270° total) B-axis 360° continuous Axis acceleration X + Y axis 6 m/s² Axis acceleration Z axis 9 m/s² Feed force X + Y axis 7500 N Feed force Z axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm Swiveling speed A-axis 180° rotation in 4 sec. Interference diameter in swivel bridge max. 1400 mm Transport load capacity in swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent tools occupied Ø 140 mm Tool diameter with adjacent tools free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Mains connection 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5–8 bar - Motor spindle LIFLEX MSP 80/63/85/12,000 (power 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary swivel table LICON as B and C axis, with hydraulic axis clamping - Zero-point clamping system on rotary table of swivel axis - Double pallet changer, without pallets (pallets need to be procured) - Media transfer via 5 single-acting pressure lines for oil or air, for workpiece clamping on pallets Hydraulic functions from 30–150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool stations, in disc-type turret design - Machine designed for dry machining with MMS (minimum quantity lubrication system) - MMS-IKZ, internal MMS lubricant supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient unit operation) - Direct measuring system on all axes - Readout operating hours, control voltage on = approx. 7500 h Space required for operation L x W x H 9000 x 5000 x 3800 mm Space required for transport L x W x H 6100 x 4400 x 3600 mm Base machine weight approx. 21 t Total weight: approx. 24 t Very good condition

Būklė: naujas, Gamybos metai: 2026, mašinos/transporto priemonės numeris: 26.07.06, Funkcionalumas: visiškai funkcionalus, Fresan FP 130P - C-Frame Eccentric Press - 130 Tons (1300kN) TECHNICAL DATA: * Capacity: 130 tons (1300kN) * Strokes per minute: 55 SPM (adjustable) * Distance between table and slide: 500 mm * Stroke adjustment: 0 - 132 mm * Slide adjustment: 95 mm (motorized) * Table dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Equipment compliant with CE regulations * Welded steel frame construction * Crankshaft made from alloy steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC ground for minimal surface friction. * Bronze bearings, quality SnBz-12 * Pneumatic clutch-brake unit * Fully enclosed, helical gear drive lubricated with oil Gsdpfjnyh Siex Ahlsbr * Press safety valve * Safety PLC & safety switches & light curtains (Pilz) * Six-way slide guide with used-oil collector * 7-inch HMI touchscreen control panel * Adjustable strokes per minute via AC inverter * Motorized slide adjustment * Mechanical overload protection (hydraulic protection can be retrofitted to standard machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pieces) * Automatic central lubrication & used-oil collector (thin oil / slideway oil) OPTIONAL EQUIPMENT: * Additional clamping plate * Part ejector (upper and/or lower, mechanical or pneumatic) * Material feed and automation systems (decoiler / uncoiler, straightener, pneumatic or servo feed unit) * Custom-built machine

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, pirmoji registracija: 07/2015, kuro tipas: dyzelinas, bendras svoris: 7 500 kg, padang padangų: 75 procentas, ašių konfigūracija: 4x2, kuras: dyzelinas, spalva: balta, pavaros tipas: mechaninis, emisijos klasė: Euro 5, sėdimų vietų skaičius: 3, bendras ilgis: 8 650 mm, bendras plotis: 2 500 mm, bendras aukštis: 3 500 mm, Gamybos metai: 2015, Įranga: ABS, borto kompiuteris, centrinis užraktas, kranas, priešrūkiniai žibintai, === MAIN SPECIFICATIONS === Year of manufacture: 2015 Operating hours: 5,510 h Working height: 30 m Maximum lateral outreach: 19.5 m Platform basket capacity: 350 kg Chassis: MAN Axles: 2 Gsdpfsyr Nkzex Ahlsbr Drive: 4x2 Transmission: Manual Cabin: Single cabin Engine power: — Fuel: Diesel Platform dimensions (L x W): Basket approx. 1.6 m Basket rotation: Yes (80° + 80°) Boom type: Telescopic boom / Articulated boom combination Outriggers: Yes – hydraulic outriggers CE certification: Yes Permissible total weight: 7,500 kg === HIGHLIGHTS === Carefully selected from reliable sources with traceable history CE certification and complete documentation available Immediately operational and ready for transport Comprehensive technical documentation available === CONDITION === Very good working condition – fully inspected, serviced, and tested by qualified technicians. Viewing and function testing possible anytime by appointment. === LOCATION & PRICE === Location: Sittard, Netherlands Worldwide delivery available Price on request (EXW / plus VAT) Reliable truck-mounted work platform from the well-known manufacturer Palfinger. The Palfinger P300 KS offers a maximum working height of 30 metres and a lateral outreach of up to 19.5 metres. This makes the machine ideal for maintenance work, installations, construction projects, and infrastructure operations. The machine is equipped with hydraulic outriggers, automatic basket levelling, and a rotating aluminium work platform, ensuring safe and stable operation under various working conditions. All machines are fully inspected, CE certified, and ready for immediate use. === TRANSPORT === Crane loading available on request to ensure smooth transport. Flexible transport solutions tailored to your destination and logistical requirements. All transports are professionally organised by the logistics team at Collé Rental & Sales.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2024, veikimo valandos: 4 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 111549, oro poreikis: 6 m³/val, darbinis slėgis: 6 juosta, bendras plotis: 1 300 mm, įvesties srovės tipas: trifazis, vidinis ilgis: 8 000 mm, Malonu pristatyti specialų „Rosler 100-4 HD“ įrenginį. Šis įrenginys naudojamas plieninių detalių apdirbimui abrazyviniu būdu, kai reikalingas didelis paviršiaus šiurkštumas. – Pagaminimo metai: 2024 m. – Įrenginio darbo laikas: 4000 val. Gsdpfx Ahowvgbgjlebr – Tinklelio konvejeris, pagamintas iš mangano, plotis – 1000 mm – Reguliuojamas juostinio konvejerio greitis – 4 turbinos, galia 11 kW, tipas „Rutten Gamma 330 HD“ – Turbinų greitis sklandžiai reguliuojamas – Automatinė detekcija – Automatinis abrazyvo srauto reguliavimas – Automatinis abrazyvo papildymas – Automatinis detalių išpūtimas – Dulkių šalinimo sistema „Rosler BF 40/40“ – Įrenginys papildomai aprūpintas drėgnu dulkių šalinimo įrenginiu, kuris leidžia apdirbti aliuminio detales (papildoma įranga už papildomą mokestį). – „Hot Spot“ kamera, pagaminta iš mangano ir įrankio plieno. – Įrenginys leidžia dirbti su didžiausio kietumo GH abrazyvu, turinčiu aštrias briaunas, arba su pjautiniu abrazyvu – tai idealus sprendimas gumos pramonėje, kur gumos vulkanizavimo proceso metu reikia didelio paviršiaus šiurkštumo. – Turbinų mentės, pagamintos iš karbido, garantuoja 30 000 valandų darbo. – Turbinų apsaugos, pagamintos iš karbido, dar labiau apsaugo įrenginio korpusą nuo nusidėvėjimo.

Būklė: geras (naudotas), Gamybos metai: 2014, Vehicle description Wheeled Excavator TAKEUCHI TB295W Year: 2014 According to hour meter: 9,709 operating hours 10,700 kg 77 kW Gbsdpfx Ahov D Dqvjler - POWERTILT - Hydraulic quick coupler - All hydraulic lines - Grading bucket - 2 trenching buckets - Blade - Outriggers - Central lubrication system - Air conditioning - Reversing camera and much more... Very nice and good original condition with original paint! Sales price: €49,950 net Affordable delivery available!