Elektrodų suvirinimo aparatas

JÄCKLE G 400 S

Būklė: naudotas, Gamybos metai: 2018, Used machine Year of manufacture: 2018 Special feature: Machine suitable for up to 100 mm edging height! Condition: factory-checked by Lange Maschinenbau Features and technical data: - Machine table with 13 roller tracks for improved workpiece guidance - Edge feeding synchronized with conveyor belt - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber overlay - Digital counter for height adjustment - Direct glue application to the workpiece: drip-free glue pot with glue reservoir from below and fast heat-up time after machine downtime - End trimming unit: - For workpiece front and rear edges - Automatic sensing on the workpiece - Pneumatic trimming with blade for cuttable edges - Flush-milling unit - With vertical tracing and horizontal guidance - Reproducible settings via digital counters - 2 powerful 0.4 kW high-frequency motors - Infinitely adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - Central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the top milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable edge tape reel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without tape reel): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Itsdpjwka S Isfx Aauof Location: Flörsheim

Būklė: naudotas, Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, Naudota panardinimo linija, gamintojas Bachhäubl HS2 12,5 - Vidiniai matmenys: 12,50 m ilgio x 1,50 m pločio x 1,50 m aukščio; - Pagaminimo metai: 1989; - Valdymas su laikmačio relė panardinimo laikui. - Medienos laikiklis su rėmu apie 7 m ilgio, prispaudėjas su 7 dantimis, apie 7 m ilgio; - Baseino vidus geros būklės, Itjdpfx Aox Aktwsauef - Vienguba siena, be surinkimo vonelės! - Svoris apie 8,5 t - Transportavimo matmenys apie 13,00 x 2,35 x 2,80 m - Įrenginys be impregnavimo priemonės ir be dumblo, - laisvai pakrauta ant sunkvežimio!

Būklė: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 03890317, Machine number: 03890317 // Condition and details as per photos Ijdpfxst A A Aqe Aauetf

Būklė: naudotas, VIENAAŠIS SMULKINTUVAS WEIMA MODELIS WLK15 Isdpfxstqd Ndj Aauotf PAGRINDINIS VARIKLIS 90 KW ROTORIAUS PEILIŲ DYDIS 50X50 (NAUJI PEILIAI) ROTORIAUS ILGIS 1500 MM ROTORIAUS SKERSMUO 370 MM ĮRENGINYS 100% VEIKIANTIS PARUOŠTAS DARBUI

Būklė: naudotas, No. 3176 WEINIG Hydromat 1000 Planer and Moulder Used, Year of manufacture: 2007 6 spindles: bottom – right – left – top – top – bottom Electronic feed: 6 – 60 m/min Working width: 80 – 150 mm Working height: 23 – 65 mm Finished lamella width: 4 – 15 mm Max. number of lamellas: 16 pcs Lamella length: 400 – 4000 mm 1st spindle, horizontal bottom Brake motor 11 kW, 6000 rpm Spindle diameter: 45 mm Tool diameter: 125 – 180 mm 2nd spindle, vertical right Brake motor 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Ijdpju Agh Ssfx Aaujtf Axial adjustment: 80 mm 3rd spindle, vertical left 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of the spindle, swivelling, pneumatically loaded roller 4th spindle, horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 5th spindle, horizontal top as saw spindle Brake motor 37 kW, 5000 rpm Diameter: 45 mm Reduced axial adjustment to 25 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 6th spindle, horizontal bottom as saw spindle Brake motor 30 kW, 5000 rpm Reduced axial adjustment to 25 mm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm All moulder spindles equipped with high-performance bearings Electronic feed, 7.5 kW Feed rollers adjustable axially by 35 mm relative to the left spindle Reduced roller spacing opposite the right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, serrated roller in the table, side pressure roller Automatic Waxilit pump / Lubrication pump Machine with 4-roller outfeed, extended universal joint shafts to 200 mm 2 driven, serrated rollers in the outfeed table 2 driven, serrated rollers in the machine table Pressure beam before and material removal after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electrically adjustable height for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Errors in description and price are excepted Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; applies: 'purchased as inspected' Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Gamybos metai: 2021, būklė: paruoštas naudoti (naudotas), Funkcionalumas: nepatikrintas, Basic package Selector 800 Sub-belt BB 1350 mm AA 6.4 m Itodpfxjvm Upno Aausf -profiled belt- SPIRAL SHAFT SCREEN DECK AA254-150 - 16 shafts

Būklė: naudotas, Gamybos metai: 2007, VIENAAŠIS SMULKINTUVAS WEIMA Itedpfetqdxfsx Aaujf MODELIS WLK15 PAGRINDINIS VARIKLIS 90 KW ROTORIAUS PEILIŲ DYDIS 50X50 (NAUJI PEILIAI) ROTORIAUS ILGIS 1500 MM ROTORIAUS SKERSMUO 370 MM ĮRENGINYS 100% VEIKIANTIS PARUOŠTAS DARBUI

Gamybos metai: 2004, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 2004-3-11A, - Manual feed of the milling unit - Working table height adjustable via handwheel - Horizontal and vertical material clamping - Cutter diameter up to 250 mm - Max. milling height 150 mm Isdpof E Higofx Aauotf - Max. milling depth 80 mm - Max. milling length 305 mm - Angle-adjustable fence, left and right, 20° – 90° - Spindle speed 4500 rpm - Drive 400 V, 3.2 kW - Compressed air connection 6 – 8 bar - Air consumption per cycle 10 l - Pneumatic profile clamping - Machine base frame - Required space approx. W 1100 x H 1300 x D 700 mm - Weight approx. 200 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 1996, Wide Belt Sander OTT ALPHA 110 - Machine in stock - After technical inspection - In very good condition - German production - Year of manufacture: 1996 - Segmental pad – ideal solution for lacquer / veneer TECHNICAL SPECIFICATIONS: Itedpfx Aajgi Dryoujf - Working width: 1100 mm - Working height: 1-150 mm - Combination unit with membrane sanding pad, task-controlled - Main unit motor power: 11 kW - Air blow on sanding belt - Pneumatic belt oscillation - Two belt speeds: 4.5 and 18 m/s - Felt roller unit - Motor power: 0.75 kW - Roller oscillation - Cleaning brush unit - Motor power: 0.75 kW - Continuously adjustable feed - Feed speed range: 4-18 m/min - Feed drive motor power: 1.5 kW - Electric height adjustment - Vacuum table - Fan motor power: 3 kW - Extraction ports diameter: 4 x 120 mm, 1 x 150 mm Transport dimensions: - Length: 200 cm - Width: 245 cm - Height: 210 cm - Weight: 2500 kg 1. Alpha Combi Unit is a sanding unit with a 150 mm diameter contact roller, 90 shore hardness. Integrated with a sectional pneumatic pad, section width: 27 mm. 2. EMS 27 Optical System – detects minimal irregularities and adjusts the pressure of each pad section to the corresponding area of the workpiece. 3. Control of respective adjacent pad sections is possible within the range -2 to +4.

Gamybos metai: 1995, būklė: geras (naudotas), The bender is capable of bending aluminum and plastic. Total length: approx. 11,500 mm. Depth: 1,600 mm. Itedpfx Aorif U Esauof