Standartinis-SZM

Iveco Stralis AS440S46T/P LNG 4x2 | 10+ pcs on stock

Būklė: naudotas, rida: 845 000 km, galia: 338 kW (459,55 AG), ašių konfigūracija: 4x2, spalva: balta, vairuotojo kabina: miegamoji kabina, pavaros tipas: automatinis, Gamybos metai: 2018, Įranga: ABS, antras kuro bakas, centrinis užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, kruizo kontrolė, oro kondicionavimas, priešrūkiniai žibintai, suodžių filtras,

Būklė: geras (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 1 050 mm, padavimo eiga Y ašimi: 360 mm, padavimo ilgis Z ašis: 500 mm, X ašies eiga: 1 050 mm, Y ašies eiga: 360 mm, Z ašies eigos atstumas: 500 mm, bendras svoris: 3 000 kg, Įranga: dokumentacija / vadovas, Tiger FO 135 universal milling machine Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully operational. Axis movements are smooth, and the guideways are in good condition, featuring an automatic lubrication system. The table is well maintained and shows minimal signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, enabling work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Dcsdjrqwbiopfx Aahed Technical Specifications • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travels: ➢ X-axis (longitudinal): 1,050 mm ➢ Y-axis (cross): 360 mm ➢ Z-axis (vertical): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed ranges: ➢ Vertical axis: 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 ÷ 1,550 rpm, 12 speeds • Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm • Variable feed rates ➢ Stepless (infinitely variable) feed: 0 ÷ 1,500 mm/min • Rapid traverse: ➢ X & Y axes: 3,000 mm/min ➢ Z axis: 1,500 mm/min • Universal milling head with 80 mm manual quill stroke • Automatic lubrication with electric pump • Low-voltage electric controls via side arm push-button panel • Star-delta starter • Siemens magnetic thermal overload protection • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories • Counter supports for milling arbor • Milling arbor ø32 mm

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 438 mm, veleno skylė: 85 mm, tekinimo skersmuo virš slankiojančio stalo: 660 mm, centro aukštis: 330 mm, tekėjimo ilgis: 1 500 mm, plunksnos brūkšnys: 165 mm, quill skersmuo: 85 mm, veleno greitis (maks.): 1 500 aps./min, veleno greitis (min.): 15 aps./min, lovos plotis: 400 mm, quillo laikiklis: MK 5, Įranga: sūkių greitis be galo kintamas, Centre height: 330 mm Centre distance: 1500 mm Spindle bore: 85 mm Spindle nose according to DIN 55029: Camlock D8 Number of gear stages: 12 Spindle speed range: 15-1500 rpm Drive power: 11 kW Weight approx. 2135 kg Dcodpfxom E Umie Aahjd Equipment includes, among others: Each gear stage is continuously variable from 50% to 100% Hardened and precision-ground Z-axis guideways Turcite coatings (on the mating surface) of the tool and cross slides Manual central lubrication with a pump for the longitudinal and cross slides Complete coolant system with rear splash guard and splash protection on the carriage Chuck guard Switching rod with 3 adjustable cams Machine lamp Fixed centre Set of machine levelling plates

Būklė: naudotas, Technical details: Welding current steplessly adjustable: 320 A Protection class: IP21 Total power requirement: 17 kVA Machine weight approx.: 132 kg Machine dimensions: 1.3 x 0.6 x 0.9 m TIG with 2-stroke; 4-stroke; spot welding and pulse welding Switchable from 2-stroke to 4-stroke Cooling type: AF New components such as: Djdpfx Asu Nwaxeahjcd - 4.0 meter torch package, water-cooled - Ground clamp and ground cable 4.0 meters - Pressure regulator

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, rida: 260 000 km, galia: 132 kW (179,47 AG), pirmoji registracija: 07/2013, kuro tipas: dyzelinas, kuras: dyzelinas, spalva: raudona, emisijos klasė: Euro 5, Gamybos metai: 2013, Įranga: ABS, diferencialo užraktas, oro kondicionavimas,

Būklė: naujas, Gamybos metai: 2022, veikimo valandos: 100 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: UT1809, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, 5-Axis Machining Center U-1530 Advanced Travel ranges X=1530mm Y=530mm Z=465mm Linear guideways on all three axes High-precision MILLING SPINDLE up to 12,000 rpm / 22 kW / 120 Nm (10% duty cycle) In-line spindle with direct drive—no belt / SK40 Automatic SPINDLE AIR PURGE SHUT-OFF TOOL MAGAZINE with 54 tool stations 2-axis ROTARY-TILTING TABLE D=650, PRECISION VERSION "T" with front counter bearing at the table console (double-sided support) Rotary table diameter 650mm -> high table load capacity 500 kg -> Swivel range: B=-90°(-50°)/+110° DIRECT MEASURING SYSTEM on B and C axes HYDRAULIC BRAKE for tilting axis B and rotary axis C FIXED TABLE on the left in the U-1530 work area, can be stepped down on two levels DIRECT MEASURING SYSTEMS on X/Y/Z axes Control system SIEMENS 840D with the following basic features: - SPINNER - SPIOS 24" touch control panel for I4.0 applications - Height-adjustable, rotatable, and tiltable control panel for optimal ergonomics - incl. engraving cycles - 24" LCD color flat screen with multi-touch functionality - 2 GB user memory - 15 zero point offsets - 1 free USB interface - Standard Ethernet interface SPINNER MULTI-CONTROL-WHEEL on the control panel -> all key setup mode functions integrated in one control element, multifunction handwheel SHOPMILL step programming, 3D SIMULATION, REMAINDER MATERIAL DETECTION, DXF reader, REAL-TIME TRACKING of machining Energy-saving function incl. automatic machine shut-off Multi-axis interpolation > 4 axes - "TRAORI" 5-axis transformations with tool orientation - 5-axis tool length compensation - Tool retraction during interruptions - RTCP manual operation for tilting axes Cycle 996 for KINEMATICS MEASUREMENT "ADVANCED SURFACE" for machining surface optimization "SPLINE INTERPOLATION" for reducing machining times (depends on raw data) 2GB additional user memory PROBING FUNCTIONS for integration of measuring probes UNIVERSAL CHIP CONVEYOR Preparation of spindle for HIGH-PRESSURE HIGH-PRESSURE TANK 70 bar with paper band filter Dcodpfsrtpmhjx Aahjd Compressed air at spindle head Central compressed air through milling spindle Rinse gun in the work area Preparation for SPINNER STANDARD MEASURING PROBE with receiver unit STANDARD DOCUMENTATION in digital form on the control system LIFTING EYES for crane unloading STANDARD PAINTWORK two-tone, light grey RAL7035 and blue-grey RAL5008 PACKAGING Notes: The price includes warranty services only within Germany. For new and demo machines, the images shown may not depict the individual machine but are representative images. Depicted accessories such as clamping devices or tool holders are included only if listed in the technical description. Please request a detailed ex-works quotation. Visit our plant near Munich or one of our showrooms. We may have further comparable machines available. Interim sale expressly reserved.

Būklė: naujas, Parallel lathe with clutch and display – Fervi T085F10 with mechanical clutch, 3-axis digital readout, and semi-Norton gearbox. Available from stock unless previously sold. EQUIPPED WITH MECHANICAL CLUTCH, 3-AXIS DIGITAL READOUT, AND SEMI-NORTON GEARBOX. FITTED WITH JOYSTICK FOR ENGAGING RAPID TRAVERSES. SOLID ONE-PIECE CAST IRON BASE. Technical data: - Centre height: 385 mm - Max turning diameter over bed: 770 mm - Max turning diameter over carriage: 575 mm - Max swing in gap: 1050 mm - Tool height: 32 mm - Distance between centres: 1000 mm - Spindle bore: 105 mm - Spindle mounting: Camlock D1-8 - Spindle speeds (12): 36 - 1600 rpm - Longitudinal feeds: 0.063 - 2.52 mm/rev - Cross feeds: 0.027 - 1.07 mm/rev - Metric threads (22): 1 - 14 mm - Inch threads (26): 2 - 28 TPI - Tailstock taper: MT 5 - Motor: 400V 50/60 Hz, 7.5 kW - Coolant pump: 400V 50/60 Hz, 90 W - Dimensions: 2500 x 1550 x 1700 mm - Net weight: 3250 kg - Gross weight: 3250 kg Included accessories: - 3-jaw self-centering chuck, Ø 320 mm (reversible jaws) - 4-jaw independent chuck, Ø 400 mm Dcsdpfovbqlhjx Aahed - Flange Ø 600 mm - Travelling steady - Fixed steady - Rotating tailstock centre MT 5 - Threading dial indicator - Leadscrew guard - Tool post guard - Chuck guard - Rear splash guard - Type C quick-change tool post - LED work light - Coolant system - Electromechanical footbrake - Quick-release tailstock carriage - Carriage gears in oil bath - Adjustable leveling feet

Būklė: naudotas, Gamybos metai: 1999, Funkcionalumas: nepatikrintas, X ašies eiga: 1 400 mm, Y ašies eiga: 630 mm, veleno greitis (maks.): 2 800 aps./min, labai tvirtas įrenginys – stalviršio apkrova iki 1200 kg Stalo dydis 1800 x 630 mm Sūkių diapazonas 56–2800 1/min, įrankio tvirtinimas ISO 50 Judėjimo keliai X / Y / Z 1400 / 630 / 500 mm Pašaros diapazonas X, Y 10–2000 mm/min (Z 2,5–500 mm/min), bepakopis reguliavimas Pagrindinis variklis 15 kW, prijungimo galia apie 20 kW įskaičiuota: universali frezavimo galva IUG 32A, pasukama 360° horizontali frezavimo špindelis greitasis važiavimas, ciklų automatas Dcodpfxjw Nvyqs Aahod skaitmeninis indikatorius Heidenhain ND 750 aušinimo skysčio įranga apsauginiai darbo zonos gaubtai hidraulinis įrankio tvirtinimas CE atitikties deklaracija

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, mašinos/transporto priemonės numeris: UT 0609, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 14 094 h, X ašies eiga: 1 520 mm, Y ašies eiga: 520 mm, Z ašies eigos atstumas: 460 mm, įrankių magazino lizdų skaičius: 24, sukimosi greitis (maks.): 12 000 aps./min, No reserve price – guaranteed sale to the highest bidder! Bidding requires timely collection by 31.03.2025! 5-axis universal machining center with integrated 2-axis CNC rotary/swivel table TECHNICAL DETAILS Machine Type Control: Heidenhain TNC 620 Travel X: 1,520 mm Travel Y: 520 mm Travel Z: 460 mm Rapid traverse: 48 m/min Table Turning diameter: Ø 650 mm (reducible to 500 mm) Table load capacity: max. 500 kg Swivel range: -5° to +110° Milling Spindle Speed: up to 12,000 rpm Drive power: 19 kW Torque: 121 Nm (10% duty cycle) Tool Changer Capacity: 24 tools (double-arm changer) Tool holder: ISO 40 per DIN 69871A MACHINE DETAILS Control on-time: 31,943 h Dedpfev Iazxsx Aahscd Machine on-time: 23,443 h Spindle run-time: 14,094 h Coolant Tank capacity: 200 liters Centrifugal pump: 83 l/min at 8 bar EQUIPMENT - Additional fixed table on the left in the workspace - Full splash guard enclosure - Work area lighting - Hydraulic and thermal compensation - Direct measuring systems for all axes - Preparation for high-pressure coolant system - Chip conveyor - Manuals on CD-ROM - U-Series laser probe - Calibration arbor with SK 40 tool holder - Interface preparation for Blum infrared probe - Workpiece probe for milling machine - SK40 pull studs - Software add-ons: Probing system function Automatic kinematics measurement via probing system cycles Swiveling of machining plane and rotary table machining

Būklė: labai geros būklės (naudotas), 3-axis DRO Universal spatial head milling machine, “HURON”-type, 360° rotation 3-axis digital readout Vertical spindle power: 2.2 kW X axis travel: 600 mm manual / 480 mm automatic Y axis travel: 270 mm manual Dcsdpjwlggujfx Aahed Z axis travel: 380 mm manual / 340 mm automatic Feed rate: 24 – 402 mm/min Number of spindle speeds: 11 Spindle speed: 45 – 1600 rpm Dimensions: 1540 x 1355 x 1650 mm Weight: 1500 kg