Interjero modeliavimo dėžutė

IPETRONIK IPETRONIK Innenraumsimulationsbox

IPETRONIK Interior Simulation Box
We offer you an IPETRONIK Interior Simulation Box.

Technical data and system description:
IPETRONIK Interior Simulation Box (new and unused)
The interior simulation box is designed to simulate the passenger compartment for tests in recirculation mode.
It features a variable internal volume from 1.8 to 4 m³.
The exhaust air volume flow from the front evaporator or the air conditioning unit is regulated and directed into the interior.
With the interior simulation box, only rear evaporators installed in the passenger compartment are tested.
The insulated enclosure is mounted on an aluminum profile frame with casters.
A light is installed inside the chamber.
The box is protected against overheating by a safety thermostat (Esti).
If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed and the system is stopped. (TRIP TEMPERATURE: 80°C)

Technical data of the insulation chamber:
Dimensions:
External: Width 1,860 mm, Depth 2,360 mm, Height 1,360 mm
Internal: Width 1,700 mm, Depth 2,200 mm, Height 1,200 mm
Insulation:
80 mm polyurethane rigid foam, CFC-free foaming, U-value 0.27 W/m2K, Building material class B1 according to DIN 4102
System technical data and description:
Connection: tongue and groove system with foamed-in eccentric latches.
Surfaces:
Both sides: 0.8 mm stainless steel sheet 1.4301, ground, grain 320
Gbsdpfx Aolypy Eocuju
Floor design:
2.0 mm stainless steel sheet 1.4301, SM-pattern, slip-resistant,
Floor perimeter angled 90° (approx. 15 mm), floor sheet flush with wall sheet,
Pressure distribution plate made of laminated wood, 1,500 N / rubber wheel load capacity (support area > 4 cm²),
30,000 N/m² surface load, floor joints fully welded, welded stainless steel pipe as floor drain, directed downwards through the floor
Chamber door:
Hatch door, single-leaf, 800 x 1200 mm clear opening, DIN left, heated door frame (230 V),
Silicone-free heating tapes, four-sided EPDM gasket,
Pressure lever lock, lockable, emergency release,
Heated inspection window, 500 x 500 mm, triple-glazed,
Surface heating (230 V), frame heating (230 V), heating controlled on-site,
silicone-free edge band
Movable wall:
1680 x 1180 mm, 80 mm polyurethane rigid foam, both sides 0.8 mm stainless steel sheet 1.4301,
ground, grain 320, with protective film, enclosed by sheet metal all around
(The rear wall can be adjusted manually and steplessly to change the volume)
Recirculation system:
For temperature control, a heat exchanger (Systemair) is integrated in the recirculation duct for indirect temperature regulation.
Air circulation is provided by a radial inline fan (Cosmo), heating is supplied by an electric heater (Türk and Hillinger) integrated in the brine circuit.
The heaters are continuously monitored by temperature sensors and limiters (Türk and Hillinger, Johnson Controls).
Cooling is achieved via a secondary brine circuit with pumps (KSB) and a 3-way valve (Belimo).
Installed electric heating power: 1 x 6kW.
Mixing ratio: 50% water / 50% ethylene glycol.
Feed from station: =TME2++AS-QF21
Operating voltage: 400V
Power: 17kW
Rated current: 33A
Main fuse: 35A
Control voltage: 24V DC / 24V AC / 230V AC
PLC system: S7 300
Type: IPETRONIK Interior Simulation Box
Condition: used
Scope of delivery: (See image)
(Subject to change and errors in the technical data and information!)
If you have further questions, we will be happy to assist you by phone.

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.