Sriegimo mašina

INGRAMATIC RP2

Būklė: naudotas, Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, sriegio ilgis: 52 mm, metrinio sriegio skersmuo (min.): 3 mm, didžiausias metrinės sriegio skersmuo: 8 mm, Plokščiakandė sriegimo volavimo staklės Ingramatic RP2 V # 408 Metai 1984 200–410 vnt./min. Skersmuo: 3,5–8 mm Žaliavos ilgis: 6–90 mm Pgsdsy D Na Uopfx Apyek Sriegio ilgis: 52 mm Įrankio matmenys: 130/115x30x54 Galia: 12 kW

Būklė: naudotas, Gamybos metai: 2009, Cutting diameter: 15 - 560 mm Cutting range at 90 degrees, flat: 560 x 630 mm Saw blade dimensions: 7,400 x 54 x 1.60 mm Control system: KASTO Material feed - single stroke: 900 mm Multiple-feed length, max.: 9,999 mm Minimum cut length: 6.00 mm Saw motor: 5.50 kW Cutting speed: 13 - 127 m/min Material support height: 700 mm Total power requirement: 12.00 kW Machine weight: approx. 6.00 t Space requirement: approx. 3.70 x 2.50 x H2.50 m Pedpfxsvxwkfo Apyogk Double-column automatic bandsaw with KASTO Compact Control; frequency-controlled saw drive; minimum quantity lubrication; chip conveyor; 6m powered feed conveyor + 3x short roller conveyor 1m; 2m discharge conveyor; machine can be inspected under power.

Gamybos metai: 1974, būklė: visiškai atnaujintas (naudotas), INGRAMATIC RP2 – OVERHAULED, LIKE NEW M8x90/45 mm Die size: 130x115x65 (h) mm 410 pcs/min Fully overhauled to as-new condition. Machine available for inspection in Calolziocorte (LC), Italy CE-compliant overhaul. The overhaul includes: - COMPLETE DISASSEMBLY AND CLEANING OF EACH COMPONENT - REPLACEMENT OF ALL BEARINGS Pjdpfxjipm Rij Apysgk - GRINDING OR REPLACEMENT OF GUIDES IF UNSUITABLE - OVERHAUL OF THE FEEDING UNIT - OVERHAUL OF THE SLIDE UNIT WITH REPLACEMENT OF THE BRONZE GIBS - NEW LUBRICATION SYSTEM WITH HYDRAULIC UNIT COMPLETE WITH PUMP, LEVEL SWITCH, PRESSURE SWITCH, AND DISTRIBUTORS - NEW COOLING PUMP FOR DIES - NEW BOWL VIBRATOR INCLUDING CONTROL PANEL AND OVERFILL PHOTOCELL - OVERHAUL OF THE ROLLER EJECTION UNIT - SAFETY GUARD WITH LAMP AND MICROSWITCH - INSTALLATION OF SOLENOID VALVE WITH NEW AIR SYSTEM FOR VIBRATOR AND GUIDES - NEW CE-COMPLIANT ELECTRICAL SYSTEM COMPLETE WITH INVERTER - NEW MOTOR - REPLACEMENT OF DRIVE BELTS - REPAINTED IN RAL COLOUR OF YOUR CHOICE

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Löser centerless tube grinding machine - belt grinding machine - centerless tube polishing machine - cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and was completely overhauled in 2012. During the overhaul, it was converted for polishing and has since only polished approx. 10,000 parts. After that, the machine was no longer in use. During the general overhaul, the motors, bearings, and the entire electrical cabinet with frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. A wastewater treatment system including pumps is currently not available. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Psdpfx Ajpugwiepyegk The machine is suitable for tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power output of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Gamybos metai: 1988, būklė: geras (naudotas), Carlo Salvi 1-Matrize 2-Schlag Modell 780/SV Maximaler Abschneidedurchmesser (mm): 6,35 Maximale Abschneidelänge (mm): 97 Pgodpshrdmxsfx Apyjk Maximale Ausstoßlänge (Stempelseite) (mm): 80 Maximale Geschwindigkeit (Stück/Minute): 360

Būklė: naudotas, Gamybos metai: 2005, Machine weight approx. 7,800 kg Required space approx. 3,380 x 3,950 x 3,015 mm Workpiece with external gearing: - Maximum module (steel with approx. 600 N/mm²): 3 mm - Maximum width: 26 mm - Maximum diameter: 100 mm Workpiece with internal gearing: - Maximum module (steel with approx. 600 N/mm²): 3 mm - Maximum width: 26 mm - Maximum swing diameter: 150 mm - Maximum internal diameter: 100 mm Tool: - Taper in milling spindle: HSK-D63 - Milling spindle diameter: 85 mm - Maximum stroke length: 30 mm Machine travel distances: - Radial (X-axis): 180 mm - Column swivel (B-axis): -1 to +11 degrees Machine – workpiece table: - Outer diameter: 220 mm - Clamping diameter: 160 mm - Bore: 63 mm Speeds: - Feed rate X-axis: 12,000 mm/min - Workpiece table (C-axis): 0–400 rpm - Cutter (C2-axis): 0–300 rpm - Spindle stroke (A-axis): 500–3,000 rpm Electrical equipment: - Operating voltage: 480V - Supply voltage: 115V - Control voltage: 24V - Frequency: 60 Hz - Machine connected load: 35 kVA - Cable cross section: 35 mm² - Fuse protection: 80 A Psdpfxsudc S He Apyegk

Būklė: geras (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 10 000 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 3 000 mm, - CNC control Heidenhain TNC 415B - Controlled 2-axis NC milling head 2.5° - Coolant system The machine is sold without the clamping plate table. Accessories: Approx. 20 pcs. tool holders DIN2080 with pull studs DIN69872 Various spare parts such as bevel gears for the milling head and a ball screw for the X-axis. Technical data / details: X-axis travel (longitudinal): 10,000 mm Podewrzkzjpfx Apysgk Y-axis travel (cross): 1,500 mm Z-axis travel (vertical): 3,000 mm Spindle taper: SK50 Spindle speed range (2-step): 35–3,000 rpm Feed rate: 6–10,000 mm/min Rapid traverse X, Y, Z: 10, 15, 10 m/min Main drive motor capacity (100% duty cycle): 37 kW Approx. machine weight: 39,300 kg Technical data, accessories and description of the machine are non-binding.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2008, YEAR: 2008 MAXIMUM RAM FORCE: 2,000 tons SLIDE STROKE: 1,500 mm Podpfovm Eixjx Apyjgk TABLE DIMENSIONS: 5,000 x 2,380 mm BLANKHOLDER FORCE (UPPER): 300 tons CUSHION STROKE (RAM): 200 mm FAST STROKE SPEED: 220 mm/sec CUSHION CAPACITY: 600 tons CUSHION STROKE (SLIDE): 400 mm OVERALL HEIGHT: 9,145 mm DISTANCE BETWEEN UPRIGHTS (FRONT OPENING): 5,000 mm TOTAL WEIGHT: N/A

Būklė: naudotas, Räummaschine Pgodpfst Hr Dfsx Apysk

Būklė: geras (naudotas), Rolling pressure: 220 kN Workpiece diameter: 3 mm min; 70 mm max Pitch: 6 mm max Knurling pitch: 2.25 mm max Roller width: 160 mm max Roller diameter: 133 mm min; 170 mm max Roller shaft speeds: 24, 30, 38, 45, 62, 72, 90, 114 rpm Roller shaft diameter: 54 mm standard; 69.85 mm special Center distance between shafts: 135 mm min; 230 mm max Stroke length: 15 mm max Feed rate: from 0.5 mm/s up to 6 mm/s Rolling time: from 0.1 s up to 100 s Pause time: from 0.1 s up to 100 s Main motor: 5.5 kW Electrical power consumption: 8.6 kW Tank capacity: 130 L Approx. weight: 2100 kg Pgjdpfxevyyyxj Apyek