CNC tekinimo-frezavimo centras

Index R 200

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° Kodpfx Ajv Ig Avef Iell SUB-SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° - Travel: 390 / 600 mm TURNING-MILLING SPINDLE - X-axis travel: 350 mm - Y-axis travel: ±80 mm - B-axis swivel range: 270° - Minimum B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on milling spindle: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE - Y-axis travel: ±80 mm - B-axis swivel range: 270° - Minimum B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on milling spindle: 6 x VDI25 TOOL CHANGER - Tool changer type: Bar magazine - Number of tools in magazine: 80 - Tool change time: 4.5 sec ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm - Machine weight: 11,000 kg OPERATING HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h EQUIPMENT - Control system: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filter * internal coolant supply (IKZ) - Chip conveyor - Spindle cooling - Parts removal system

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, X ašies eiga: 2 600 mm, Y ašies eiga: 700 mm, Z ašies eigos atstumas: 700 mm, greitas poslinkis X ašimi: 40 000 m/min, greitas poslinkis Y ašis: 40 000 m/min, greitasis eiga Z ašyje: 40 000 m/min, stalo plotis: 750 mm, stalo ilgis: 2 900 mm, stalo apkrova: 2 150 kg, 5-Axis Machining Center DMG MORI - DMF 260-7 X-axis travel: 2600 mm Y-axis travel: 700 mm Z-axis travel: 700 mm A-axis travel: 360,000° B-axis travel: -110 to +110° Table length: 2900 mm Table width: 750 mm Table load capacity: 2150 kg Table diameter Ø: 750 mm Feed rate X-axis: 40,000 mm/min Feed rate Y-axis: 40,000 mm/min Feed rate Z-axis: 40,000 mm/min Tool holder: 40 ISO/BT/MK Spindle power: 35 kW Spindle speed: 18,000 rpm Tool changer: 30 positions Internal coolant supply (IKZ): 20 bar Number of controlled axes: 5 Chip conveyor: Yes Coolant unit: Yes Length: 8,400 mm Width: 3,423 mm Height: 2,620 mm Kledpfx Afjxuqv Aj Isl Weight: 16,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, ašies skaičius: 2, valdiklių gamintojas: Siemens, valdiklio modelis: 840D Solution-Line, Comprehensively equipped turning and milling center with main and sub spindle! TECHNICAL DETAILS Spindles Main spindle: D65 Sub spindle: D65 Tool Turrets Tool Turret 1: Motor-driven milling spindle tool system HSK A40 2 × 3 fixed tool stations: VDI25 on WT1 XYB Tool Turret 2: Motor-driven milling spindle tool system HSK A40 2 × 3 fixed tool stations: VDI25 on WT2 XYB Cooling Systems Interface: Cooling water for machine cooling Cooling unit: Spindle and control cabinet cooling Coolant through main spindle: available Coolant through sub spindle: available Coolant pump 8 bar: on cleaning system Medium-high pressure pump 20 bar: on cleaning system Kodpewylz Tefx Af Iell High pressure pump emulsion: 16 l/min High pressure pump oil: 33 l/min max. 80 bar Coolant fine filtration: Compact band filter type KF150 Filter fleece type: PN 100/100-540 Clean water tank: 1,500 × 1,010 × 600 mm (approx. 900 l capacity) 5-Axis machine configuration: available Control: Siemens 840D Solution-Line FEATURES Tool changer Electronic shaft for spindles and drive units Main spindle expansion stages Stop device incl. coolant supply through main spindle with solenoid valve Sub spindle expansion stages Stop device incl. coolant supply through sub spindle with solenoid valve Precision package Portal unloading system Finished part conveyor belt Hinged belt conveyor 1,250 mm with lift pump Chip discharge right Coolant supply and fine filtration Bar feeder INDEX LMS 3,200 SBL Boring direction for SBL Various tool holders (fixed and driven) Various sleeves for the bar feeder

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, veikimo valandos: 44 600 h, Funkcionalumas: visiškai funkcionalus, 1,0 vnt naudota dviejų komponentų liejimo mašina su robotu Gamintojas: ARBURG Tipas: 570S2200-400/170e² Metai: 2010 Uždarymo jėga: 220 tonų Kolonų atstumas: 570 x 570 mm Montavimo aukštis min./maks.: 350 mm Atidarymo eiga: 1.000 mm Klodpeu E E H Sofx Af Isl Sraigtas DN 1: 35 mm Didž. įpurškimo tūris: 154 cm³ Liejinio svoris: 141 g/PS Sraigtas DN 2: 30 mm Įpurškimo tūris: 59 cm³ Liejinio svoris: 47 g/PS Valdymas: SELGOCIA Įranga: 3 x šerdžių trauktuvai Vertikali įpurškimo sekcija 6 ašių robotas, gamintojas: KUKA, tipas: KR 16 Wikut, metai: 2010 Konvejeris Apsauginė tvora

Sąlyga: naudotas, TECHNINIAI DUOMENYS - Atstumas tarp centrų: 600 [mm] Kledeuhbywopfx Af Ijl - Centrinės aukštis: 175 [mm] - Stalo orientacija: 11 [°] UNIVERSALUS ŠLIFAVIMO DISKO LAIKIKLIO VERŽLIARAKTIS - Kairiojo šlifavimo disko matmenys: 400 x 50 x 127 [mm] - Dešiniojo šlifavimo disko matmenys: 225 x 20 x 76,2 [mm] - Variklio galia: 3 [kW] - Veleno greitis: 1500 / 1700 / 2200 - Šlifavimo disko laikiklio veleno orientacija: 270 [°] DETALĖS LAIKIKLIO VERŽLIARAKTIS - Detalės laikiklio veleno orientacija: 360 [°] - Veleno greitis: 20 - 400 [aps./min] - Vidinis kūgis: Morse 5 - Variklio galia: 0,9 [kW] PRIEŠVELENIS - Vidinis kūgis: CM4 - Pinolės eiga: 30 [mm] MATMENYS - Užimamas plotas: 2580 x 1680 [mm] - Aukštis: 1670 [mm] - Svoris: 2200 [kg] PRIEDAI - FISCHER vidinis gręžimo velenas: 14.000 [aps./min]

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 450 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 240 mm, bendras svoris: 6 000 kg, veleno greitis (maks.): 42 000 aps./min, 5-axis HSC milling machine Röders RXP500DSC with linear direct drives in all axes and torque drives in the rotary axes. The machine is completely overhauled, checked, and measured in-house. It meets new machine tolerances again! Travel ranges: X 450 mm, Y 400 mm, Z 240 mm Distance spindle/table: approx. 315 mm - Linear direct drives in all axes – maintenance-free - 19-position tool changer - Cooling unit for drives, milling spindle, and control cabinet - Measuring laser for fully-automatic measurement of milling tools (length/diameter/contour/cone angle) as well as wear monitoring, including tool cleaning before measurement - Hand-held control unit - Remote maintenance - Automatic 3D probe including calibration ball in the tool changer Kedpfx Ajtt Argsf Ijll - Minimum quantity lubrication - Emulsion cooling - HSK40E spindle with max. 42,000 rpm - Spindle length compensation - EROWA zero-point clamping system integrated into the machine table - Manual chuck actuation - Automation package for retrofitting the machine with a pallet changer - Hand-held control unit An inspection of the machine in ready-to-operate condition is possible at any time. You are also welcome to find out more about the scope and quality of our overhauled machines on our website or on our Hüttmann YouTube channel.

Sąlyga: geras (naudotas), Manufacturer: ESTARTA Model: 301 MV Condition: Used Stock Number: 4576 Location: Badajoz, Spain Dimensions: 1520 x 1020 x 1260 mm Weight: 1,550 kg Grinding wheel opening: 1.5 / 50 mm Max. grinding wheel width (for plunge grinding): 125 mm Work grinding wheel dimensions (OD x ID x width): 300 x 125 x 175 mm Klsdpfx Afjr Ezfpe Isl Min. external diameter of work grinding wheel: 220 mm Max. profile depth of work grinding wheel: 8 mm Regulating wheel dimensions (OD x ID x width): 220 x 125 x 125 mm Min. external diameter of regulating wheel: 165 mm Max. profile depth of regulating wheel: 8 mm Work grinding wheel motor power: 7.5 kW Regulating wheel motor power: 0.75 kW Work grinding wheel head tilt angle: +/- 5º

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 14 500 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 11779, tekėjimo ilgis: 700 mm, tekėjimo skersmuo: 250 mm, ašies variklio galia: 26 000 W, veleno greitis (min.): 3 200 aps./min, veleno greitis (maks.): 3 200 aps./min, veleno skylė: 65 mm, bendras svoris: 8 500 kg, incl. 2x Hainbuch/Ortlieb chucks, conveyor belt, swiveling touch probe with 2 heads MANUAL GUIDE_dialog programming high-pressure pump 18 bar/20 l/min SBS tool breakage monitoring, wear control Machine year: 2013 – Commissioned: 05/2014 good & well-maintained condition Kledpfsrdy Uqjx Af Isl original purchase price approx. €300,000 !!! ATTENTION -> Sale without loader!!!

Sąlyga: naujas, Gamybos metai: 2026, The ERBA Turbo 60 is a centrifugal finishing machine for deburring, smoothing, and polishing small to medium-sized workpieces. The machine features a digital process timer, a digital speed display, and a dosing pump (wet configuration). The turntable speed can be adjusted via frequency converter. The Turbo 60 is available in both dry and wet versions. It can be optimally linked with the ERBA YE-60 separation unit shown in the images. Technical Data: Klodpjn Ut Ilofx Af Isl - Gross volume: 60 L - Drive power: 3.0 kW - Turntable speed: 75 to 300 rpm - Optional equipment: tilt motor, soundproof lid, or separation box Prices are net plus the currently applicable statutory VAT and shipping costs. Some images may show the machine with accessories and options which are available at extra cost. If you are interested, we look forward to hearing from you. We are happy to provide you with non-binding advice. The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations take place by means of telecommunication (email, telephone, messaging portal). As a first step, we will send you a non-binding quotation, which also includes our general terms and conditions (with imprint) and information about your right of withdrawal before any purchase or contract is concluded.

Sąlyga: naudotas, Gamybos metai: 2022, DOOSAN DNM 4500 Gamybos metai: 2022 Valdymas: Siemens 828D lietimui jautrus ekranas 2x Renishaw zondai 12.000 aps./min. maks. Aušinimas per veleną X ašies eiga: 800 mm Kedoxq Rbwjpfx Af Isll Y ašies eiga: 450 mm Z ašies eiga: 510 mm Didžiausia ruošinio masė: 600 kg Įrankių magazinas: 30 pozicijų SK40 - 2x Renishaw zondai - Drožlių transporteris - Vonia su siurbliu - Dokumentacija