CNC daugiabriaunių automatinių tekinimo staklių staklės

INDEX MS 18

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 13 116 h, Max. bar capacity mm 20 Max. Z-axis travel sliding headstock/short turning mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations quantity 8 Driven tools quantity 8 Max. speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 B-axis swivel angle degrees 105 Lower turret Tool stations quantity 8 Driven tools quantity 8 Max. speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Backworking unit Tool stations quantity 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Holder diameter mm 25 Sub spindle Max. spindle bore mm 20 Max. speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Gbjdpfx Abjwuddvedeg Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant system base unit Pump pressure bar 3 / 8 Tank capacity l 250 Pump rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions Length x Width x Height mm see layout plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2010, Maschinentyp: CNC-Rundschleifmaschine Hersteller: Fritz Studer AG Modell: S22 Baujahr: 2010 Steuerungssystem: FANUC 31i-A CNC Maschinenbett: Granitan® S103 Mineralguss Ausführung: Fester Geradschleifkopf für Außenrundschleifen (Außendurchmesser) Automatisierung: Automatisches Beladesystem mit Integration eines FANUC-Roboters Spitzenweite: 650 mm Spitzenhöhe: 175 mm Max. Werkstückgewicht: 150 kg Max. Werkstücklänge: 700 mm Max. Werkstückdurchmesser: 449 mm Schleifscheibendurchmesser: 610 mm Schleifscheibenbreite: 160 mm Gsdowl Uvkspfx Abdsbg Schleifscheibendrehzahl: Bis zu 3.200 min⁻¹ Spindelleistung: 15 kW Schleifkopf: Feste, gerade Ausführung Verfahrweg X-Achse: 310 mm Verfahrweg Z-Achse: 850 mm Max. Eilgang X-Achse: 15.000 mm/min Max. Eilgang Z-Achse: 30.000 mm/min C-Achse: Vollständige Rundumdrehung des Werkstückkopfes Programmieroberfläche: StuderWIN mit FANUC 31i-A Zusatzsoftware: StuderGRIND Automatisierungsschnittstellen: Standard-Schnittstellen für Lader und Peripheriegeräte Weitere Ausstattung: Abrichtgerät (Rotationsabrichter), Heidenhain-Maßstäbe, diverse Spannmittel

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 500 mm, Y ašies eiga: 700 mm, Z ašies eigos atstumas: 610 mm, nominali (akivaizdi) galia: 37 kVA, sukimo momentas: 236 Nm, valdiklių gamintojas: Heidenhain iTNC530, valdiklio modelis: iTNC530, stalo plotis: 700 mm, stalo ilgis: 1 700 mm, stalo apkrova: 700 kg, sukimosi greitis (maks.): 12 000 aps./min, bendras svoris: 9 000 kg, veleno greitis (maks.): 12 000 aps./min, veleno veikimo valandos: 16 580 h, ašies variklio galia: 37 W, ašies skaičius: 1, įrankių magazino lizdų skaičius: 48, Įranga: dokumentacija / vadovas, drožlių transporteris, 3-axis CNC machining center Heidenhain iTNC530 X travel: 1500 mm Y travel: 700 mm Z travel: 610 mm Table size: 1700 x 700 mm Tool holder: SK40 Tool magazine: 48 tools Rapid traverse: 36 m/min Table load capacity: 700 kg Through-spindle coolant: 20 bar Chip conveyor Gbsdpfx Ajvz Tyuobdog Handwheel

Sąlyga: naudotas, Swing diameter over bed: 2400 mm Swing diameter over cross slide: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Faceplate diameter: 1650 mm Speed range: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over cross slide: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm (with special jaws up to 2050 mm) Clamping diameter in tailstock faceplate: 300 - 1400 mm Max. workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speeds, infinitely variable in 4 steps: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center cone angle: 70° Slides Travel of grooving slide: 500 mm Travel of plan slide: 1400 mm Rapid traverse long axis: 2000 mm/min Gjdpfxexddvne Abdobg Rapid traverse plan axis: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, plan: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Diameter of faceplate (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange center cone angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying attachment for first support - Copying length: 8500 mm - Max. copying depth in one pass: 500 mm Boring attachment - Boring bar: 460 x 390 mm - Boring diameter: 600 - 1000 mm - Max. boring depth in one pass: 2700 mm For Ks of 200 kp/mm² - s max. = 1.5 mm/rev - a = max. chip section 30 mm² with 1000 mm overhang - With increasing boring depth, chip section is reduced One taper turning guide, setting angle up to 8° and max. taper length (in one process) of 2000 mm, setting accuracy ± 5 minutes. One taper turning guide, setting angle up to 15° and max. taper length (in one process) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane at the headstock.

Sąlyga: naudotas, Gamybos metai: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6 / 3.5 m Photos show identical machine with centre height 225 mm Base machine: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Standard equipment: - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - B-axis infinitely variable, high-resolution - Marposs measuring system for tool measurement - Active longitudinal positioning - GAP control on T1 and T2 by ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO, integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt driven Options available at extra cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm with integrated GAP sensor (lead time applies) - CNC-controlled C-axis - Non-circular (polygon) grinding - Hydrostatic lead screw in X - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical overhaul: - Complete machine overhauled in accordance with Kellenberger test protocol - New easy-maintenance enclosure - New paintwork Gjdpfjuxfucsx Abdebg Electrical overhaul: - New, modern CNC CYLINDRICAL GRINDER CONTROL with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic license and various optional modules depending on the machine’s equipment. Basic software features: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal cylindrical oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zero setting - Wheel zero setting - Measurement of dressing diamonds - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - 3 flat dressing units - Corrections - Z-position measurement (probe required) - GAP contact (touching device required) OPTIONS available at extra cost: Profile plunge grinding software: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single- and multi-start external and internal thread grinding with profile dressed on the wheel - Dressing of single- and multi-rib wheels - Flank angle freely selectable Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-round plunge grinding: - External and internal non-round oscillation grinding Non-round grinding software: Precondition for non-round grinding is equipping the workpiece spindle with a high-resolution rotary encoder to enable operation as a C-axis. The non-round...

Sąlyga: naudotas, Gamybos metai: 2008, Article: Vertical Turning and Grinding Center Make: EMAG Model: VSC 250 DS Year of manufacture: 2008 Control unit: SIEMENS 840D Grinding spindle speed: 30,000 rpm Turning spindle speed: 3,000 rpm Turret tool stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling Air through the spindle Gbedpfx Abeia Rtdjdjg Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled at a spindle repair shop. Otherwise, the machine is in very good condition and fully functional. Please contact us for further information and pictures via mail(at) or

Sąlyga: geras (naudotas), šlifavimo skersmuo: 1 600 mm, šlifavimo ilgis: 6 000 mm, Manufacturer: CINCINNATI Model: 60 x 216 Year of manufacture: 1970 Convex and concave grinding 6 steady rests included 2 hydrostatic steady rests Coolant system with magnetic filter Measuring system with 5-arm caliper: Arm 1: Working range 1300 to 1600 mm Arm 2: Working range 1000 to 1300 mm Arm 3: Working range 700 to 1000 mm Arm 4: Working range 400 to 700 mm Specifications Metric US Standard Godpovvvw Eefx Abdebg Centre height: 787 mm Grinding diameter Ø: 1574 mm Grinding length: 5800 mm Grinding wheel size: 914 x 101.6 x 304.50 mm Wheel speed: 1800 rpm Dimensions (approx.): Length: 15,100 mm Width: 5,500 mm Height: 3,550 mm Weight: 120,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but its accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are implied. We recommend you verify all key details.

Sąlyga: naudotas, CNC multi-spindle automatic lathe INDEX MS 32 C Godpfx Ajuhaqbjbdsbg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, Control: Fanuc 21T Turning diameter: 158 mm Swing diameter over bed: 340 mm Spindle speed: 6,000 rpm 8-position turret Tailstock Gjdpfxewmzhpj Abdobg 3-jaw chuck, 2-jaw chuck, collet chuck Collets Wide range of tool holders

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, bendras svoris: 35 000 kg, spaudimo jėga: 250 t, įvesties srovės tipas: trifazis, galia: 30 kW (40,79 AG), perforavimo jėga: 250 t, įėjimo įtampa: 200 V, Įranga: apsaugos šviesos užtvara, AIDA NC2-250(1) 250t Eccentric Press in Excellent Condition /ctA2/ Manufacturer: AIDA Model: NC2-250(1) Press Force: 160 t Year of Manufacture: approx. 1991 Stroke Length: 170 mm Die Height (adjustable): 280–400 mm Table Dimensions: 2700 x 760 mm Gbjdpfju Dxb Tjx Abdsg Ram Dimensions: 2100 x 700 mm Electrical Supply: 3x200V (!!), 30 kW – Japanese standard Net Weight: 35,000 kg Dimensions: 2760 x 2800 x 3980 mm Automatic lubrication system. Automatic cutting oil dosing – RAZIOL EST-02 Optionally available with decoiler and straightening machine.