CNC tekinimo staklės

Index G 200 Ratioline

Gamybos metai: 2003, Sąlyga: paruoštas naudoti (naudotas), Parduodamas visiškai autonomiškas INDEX dvigubo veleno CNC tekinimo staklės. Maksimalus tekinimo skersmuo: 220 mm, pagrindinio veleno perėjimo skersmuo: 65 mm, pagrindinio veleno griebtuvo skersmuo: 210 mm, priešinio veleno perėjimo skersmuo: 60 mm, priešinio veleno griebtuvo skersmuo: 210 mm, įrankių vietų skaičius: 12, Y ašies eiga: 120 mm, griebtuvo skersmens diapazonas: 4 mm–45 mm/40 mm–65 mm, aušinimo skysčio siurblio slėgis: 8 bar, aukšto slėgio siurblio slėgis: 80 bar, drožlių transporterio išmetimo aukštis: 1250 mm. Bendri matmenys X/Y/Z: apie 9150 mm/4350 mm/2000 mm, svoris: apie 10500 kg, darbo valandos: apie 92000 h. Komplekte FMB turbo 8-80 XT/3200A strypų padavimo magazinas, alphaMAX 6 ašių automatinė pakrovimo ir iškrovimo sistema, drožlių transporteris, aušinimo skysčio sistema, aukšto slėgio siurblys ir atsarginės dalys. Pakrovimo ir iškrovimo sistema skirta diskų apdorojimui nuo 80 mm iki 220 mm skersmens. Tai visiškai automatizuota beoperatorinė sistema. Yra dokumentacija. Galima apžiūra vietoje. Planuojama prieinama nuo 2026 m. birželio mėn. Pgsdpfx Afeyfv Nke Neg

Gamybos metai: 2013, Sąlyga: paruoštas naudoti (naudotas), Available for sale are a Rehm Invertig Pro 350 AC/DC and a Rehm Invertig Pro 450 DC, both used and in good condition. 1) Invertig Pro 350 AC/DC - Standards: IEC 60 974-1, IEC 60 974-2 - Welding current range (TIG): 3–350A - Output voltage U₂ (at max. current): approx. 24V - Open-circuit voltage U₀: approx. 91V - Duty cycle (ED): 100% (for TIG at 350A) - Mains voltage/input: 3-phase, 400V, 50Hz - Protection class: IP 23S - Insulation class: S - Adjustable range: 3–350A (TIG for this AC/DC variant) - Duty cycle: 100% at 40°C, 350A (TIG), 100% ED - Input fuse: 32A (at 3x400V for 350 AC/DC variant) - Dimensions: Length 520mm, Width 360mm, Height 460mm - Weight: 29.5kg (AC/DC version) Pgedpfxexddame Af Nog 2) Invertig Pro 450 DC - Standard: IEC 60 974-1 - Welding current range (TIG): 3–450A - Output voltage U₂ (at max. current): approx. 28V - Open-circuit voltage U₀: approx. 91V - Duty cycle (ED): 100% at 450A (TIG); lower for electrode welding (approx. 60%) - Mains/input: 3x400V, 50Hz - Protection class: IP 23S - Duty cycle: 100% ED, 450A (TIG) at 40°C - Electrode welding (stick): approx. 360A at 100% ED for electrode on 450 DC version - Power / Input fuse: 32A at 400V (3-phase) for 450 version - Dimensions: Length 520mm, Width 360mm, Height 460mm - Weight: approx. 28kg On-site inspection is possible.

Gamybos metai: 1995, Sąlyga: paruoštas naudoti (naudotas), Maximum speed range: 5,000 rpm, bar capacity: 65 mm, maximum turning diameter: 200 mm, maximum turning length: 400 mm. Number of spindles: 2, tool changer: 2 x 14 stations, Siemens control unit. Includes discharge conveyor, KNOLL 400S-1 chip conveyor (year of manufacture: 2016), electrical cabinet with cooling unit, CO2 extinguishing system, and INDEX bar loader. Fully overhauled in 2016. Psdpfx Afjtdwwmj Negg

Sąlyga: naudotas, Gamybos metai: 2009, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 73136, X ašies eiga: 1 350 mm, Y ašies eiga: 1 150 mm, Z ašies eigos atstumas: 720 mm, nominali (akivaizdi) galia: 64 kVA, valdiklių gamintojas: Heidenhain, valdiklio modelis: iTNC 530, bendras aukštis: 3 150 mm, bendras ilgis: 5 605 mm, bendras plotis: 4 290 mm, bendras svoris: 12 600 kg, veleno greitis (min.): 15 000 aps./min, veleno veikimo valandos: 21 786 h, įrankių magazino lizdų skaičius: 46, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in working condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 probing system. Operating hours (as read): - Control on: approx. 112,194 h - Machine on: approx. 72,272 h - Spindle on: approx. 21,786 h - Programs: approx. 21,654 h Condition: Used machine with standard signs of use, technically functional. Inspection under power available by appointment. Working Areas Travel paths: - X-axis: 1350 mm - Y-axis: 1150 mm - Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle - Standard spindle 15,000 rpm - Speed range: 0–15,000 rpm - Acceleration time to max. speed: approx. 2.5 s - Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) - Torque: 193 Nm (S6 = 40% duty cycle) - Tool holder: HSK-A63 (DIN 69063-1, optional ISO-B40/DIN 69871) - Max. tool diameter: 130 mm (fully loaded) - Bearings: Ceramic-hybrid Ø 70 / Cronidur-Steel - Lubrication: Permanently lubricated - Cooling: Water with corrosion protection Feed Drives - Feed motors: AC - Rapid traverse/working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle/h) - Measuring systems X/Y/Z: Linear scales (direct) Rotary Table - Clamping surface: Ø 1100 × 1000 mm, flattened sides - Table load: 1600 kg - T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm spacing) Pgsdex Eh Iqepfx Af Njg - Centering bore: Ø 50 H6 - Clamping torque: 8000 Nm - Max. mass moment of inertia: 75 kg·m² - Table height above floor: 1120 mm - Table drive: Torque motor, direct - Drive torque: 1600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) - NC swivel range: +16° to −120° - Measuring system: direct, absolute - Clamping principle: hydraulic, stepless - Max. swivel speed: 4000 °/min - Max. working swivel torque: 600 Nm (S6 40%) - Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer - 46-position magazine (installed as per documentation) - Magazine slots: 46 - Tool holder: HSK-A63 (DIN 69063-1), optional ISO-B40 - Max. tool diameter: 80 mm fully loaded 130 mm partially loaded - Max. tool length: 300 mm - Max. tool weight: 8 kg - Magazine capacity: 200 kg - Chip-to-chip time (vertical): 11 s Coolant / Chip Conveyance - External coolant supply (AKZ): 40 l/min, 2.5 bar - Internal coolant supply (IKZ) Electrical Data: - Installed nominal power: 75 kW - Connected load: 58 kW - Power input: 64 kVA - Control voltage: 24 V DC - Operating voltage: 3 × 400 V, 50 Hz - Protection class: IP54 Dimensions & Weight - Machine weight: approx. 12,600 kg (without accessories) - Required space (L × W × H): 5605 × 4290 × 3150 mm

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, 1 gebrauchte Haeger 412 Einpressmaschine für Blech-Befestigungselemente, Bolzen & Muttern, selbstklemmend, zu verkaufen. Mit Werkzeugen und J-förmigem Unterwerkzeug. Pgsdpfx Aewbhipef Nog

Sąlyga: naujas, MEP SHARK 230-1 NC HS 5.0 Double-Column Metal Band Saw Article Number: SH230-1NCHS Motor Power: 2.2 kW Pgjdpfx Afechhfuo Neg Vice Opening: 235 mm Blade Dimensions: 2950x27x0.9 mm Weight: 1,000 kg Cutting Speed: 15 - 100 m/min (stepless) Cutting Capacity 0°: 230 / 230x230 mm Cutting Capacity 45° right: Cutting Capacity 45° left: Cutting Capacity 60° right: Cutting Capacity 60° left: Description: SHARK 230-1 NC 5.0, electro-hydraulic double-column fully automatic band saw with both semi-automatic and fully automatic operating modes. Max. remnant length: 70 mm. Bundle cutting: 230 x 230 mm. Numerically controlled band saw with the new MEP 50 – Windows-based control system. Material feed via stepper motor and ball screw, mounted on opposing ball bearings. Single stroke: 500 mm, repeatable to saw any length. Simple programming – enter cutting length and quantity, then press "START". Electronic blade tension control. Automatic cutting load monitoring through a servo valve mounted directly on the cylinder. Rotation control of the blade with instant stop in the event of a jammed saw blade.

Sąlyga: naudotas, Gamybos metai: 2008, Used drilling center from CMA Type: TRD 40 CN 9000 Pgedpfewc Ndwjx Af Nsg Table length: 9000 mm Maximum capacity: 40 mm Automatic tool changer Year of manufacture: 2008

Sąlyga: beveik kaip naujas (parodų įrenginys), stalo ilgis: 500 mm, stalo plotis: 300 mm, Surface grinding machine Ziersch Z35 - Demonstration machine, unused - Grinding range: 500mm x 350mm Pgedpovvwf Djfx Af Nsg Dresser Permanent magnet Belt filter system with magnetic separator

Gamybos metai: 2008, Sąlyga: paruoštas naudoti (naudotas), Presavimo jėga: 220 kN, darbo sritis kombinuotame režime X/Y: 2585 mm/1650 mm, darbo sritis presavimo režime: 3085 mm/1740 mm, darbo sritis lazerio režime X/Y: 3085 mm/1650 mm, didžiausias lakšto storis statybinis plienas/nerūdijantis plienas/aliuminis: 8 mm/6 mm/4 mm, didžiausias ruošinio svoris: 230 kg. Pozicionavimo greitis: 109 m/min, didžiausias taktų skaičius: 900 taktų/min, didžiausias ženklinimo našumas: 2800 taktų/min, įrankių vietos: 18, tikslumas: +/-0,1 mm. Staklių matmenys X/Y/Z: apie 8000 mm/9000 mm/2500 mm, svoris: apie 22 500 kg. Dokumentacija yra. Galimas apžiūrėjimas vietoje. Tikėtina, kad bus prieinama nuo 2025 m. lapkričio. Pedpfx Afoxddags Nsgg

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2010, veikimo valandos: 15 996 h, bendras svoris: 6 750 kg, įėjimo įtampa: 400 V, 1000 kN Max. stroke: 200 Weight: 6,750 kg Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50 Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV (accident prevention regulations) inspection performed at regular intervals / maintenance always carried out regularly by Amada Accessories: Tool Die: 2 pcs UKB 20.478 V8/12 30° 835 mm 3 pcs UKB 20.344 V4/V7 88° 835 mm Tool Holders: Pgjdpfx Afotwliwo Nsg 4 pcs UKB base for double V die 20.287 + 60.919 835 mm Press Brakes: 5 pcs UKB 10.261 H100 R0.6/90° 2 pcs UKB 11.158 H80 R0.6/30° 2 pcs UKB 11.200 H66 R0.8/90° Other: Light curtain in need of repair (replacement value approx. €4,500) – included separately as a spare part (has been replaced) The machine can be inspected live under power in DE84051 Mettenbach by appointment. Sale only to businesses and under exclusion of any warranty!