Didelis greitis Pavarų dėžė Koloninės gręžimo staklės

IBARMIA AX 32

Sąlyga: naudotas, Drilling Machine, Pedestal Drilling Machine, Column Drilling Machine, Upright Drilling Machine - Manufacturer: Ibarmia, Column Drilling Machine Type 40 TF/C - Motor: Siemens 1.1 kW - Speeds: 104 - 1450 rpm, forward and reverse - Table size: 360 x 300 mm, travel 600 mm - Spindle taper: MK3 - Spindle stroke: 150 mm - Feed: automatic - Throat depth: 300 mm - Column diameter: 125 mm - Coolant system Podehaxknspfx Ah Hjpl - Dimensions: 480/680/H2220 mm - Weight: 358 kg

Sąlyga: geras (naudotas), Gamybos metai: 1988, Operating voltage: 380 V Connected load: 7.5 kVA Dimensions: 2725 x 1930 x 1773 mm Machine weight approx. 2500 kg Technical specifications – Main data: - Table surface: 605 x 300 mm - Max. longitudinal table travel (manual): 750 mm - Cross table travel: 340 mm - Grinding height between table and new grinding wheel min/max: 22.5 / 322.5 mm - Standard magnetic chuck size: 600 x 300 mm - Workpiece weight incl. magnet: 420 kg X-axis / Longitudinal travel: - T-slots (quantity x width): 3 x 17 mm - Table feed, hydraulic: 0.3–25 m/min - Travel per handwheel revolution: 47 mm Y-axis / Vertical movement: - Automatic vertical feed – coarse, 12 steps: 0.001–0.03 mm - Automatic vertical feed – fine, 8 steps: 0.001–0.01 mm - Travel per handwheel revolution (x1/x10): 0.1 / 1.0 mm - Scale division on handwheel (x1/x10): 0.001 / 0.1 mm - Spark-out strokes (Ausfeuerhübe): 0–5 - Rapid traverse: 400 mm/min Z-axis / Cross travel: - Automatic intermittent cross feed: 0.5–20 mm - Automatic continuous cross feed / rapid traverse: 0.1–1.0 m/min - Travel per handwheel revolution: 5.0 mm - Scale division on handwheel: 0.02 mm Standard grinding wheel: - Diameter x width: Ø 355x38 (50) mm - Bore: Ø 127 mm - Speed: 1500 rpm Accessories: various grinding wheels Pedow Dvkaspfx Ah Hepl Documentation included

Sąlyga: naujas, Saw blade diameter: 315/350 mm Cutting range at 90 degrees, round: 125 mm Cutting range at 90 degrees, square: 110 mm Cutting range at 90 degrees, flat: 160x90 mm Cutting range at 45 degrees, round: 105 mm Cutting range at 45 degrees, square: 90 mm Cutting range at 60 degrees, flat: 80x100 mm Total connected load: 1.8/2.5 kW Machine weight: approx. 0.2 t Space requirement: approx. 0.6 x 1.22 x 1.06 m The large workshop saw with advanced technology. (20070) • For mitre cuts to the right and left up to 45°, end stop at 90° and 45° left • Suitable for cutting steel, stainless steel, and, to a certain extent, aluminium profiles • Vice with quick-release lever, longitudinally adjustable clamping jaw, adjustable guide, and double clamping arm for burr-free cuts • Taper safety clutch made of hardened steel to protect the saw blades • Large, solid cast baseplate for maximum stability and low-vibration cutting • 2 speeds: 30 + 60 rpm • High-performance special gearbox with flexible coupling for heavy-duty applications • Automatic cooling directly onto the saw blade • Saw head with double bearing • 24 V safety switch in the handle with restart protection • Length stop, assembly tools NOTICE: Price is without saw blade!!! Psdpfxed Iin Tj Ah Hepl

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C, NEWLY Refurbished with Acceptance Protocol for New Machine Tolerances Technical Data: Ppodpfx Ahjvrcqdo Hol – Machine No. 1824 – Center Height: 180 mm – Center Distance: 1000 mm – Spindle Speeds: 13 to 2000 rpm – Spindle Bore: 56 mm – Short Taper Spindle Nose DIN 55029 Size 5 – Tailstock Morse Taper: MK 4 – Feeds: 0.026 to 0.888 mm/rev – Thread Types: Metric, Inch, Module, and Diametral Pitch – Metric Thread Pitches: 0.35 to 12 mm – Weight: approx. 1500 kg – Spindle Brake, switchable – Drive Power: 2.0/4.0 kW – Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: – 3-Axis Digital Readout by K&C, new, 12 months manufacturer’s warranty with operating manual Features: Switching mm/inch, coordinate selection ABS/INC, halving of display value, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching – 200 mm three-jaw chuck, wedge bar type, like new, 1 set of jaws – Multifix size B with 2 tool holders, NEW – Bed stop – Machine feet – Coolant system – LED machine lamp For added safety, the machine is equipped with: – Electronic spindle guard – Spindle brake – 2 emergency stop switches On request: Covers for the lead and feed screw About the machine: This listing is for a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guideways have been reground and hand scraped. Acceptance inspection per test report. Painted in high-gloss 2K white. Accessories such as Multifix and chuck are new. For safety, the machine features a brake motor, electronic spindle guard, and two emergency stop switches—an absolutely as-new condition lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely operator-friendly, allowing surfaces to be produced as finely as ground. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Sąlyga: naujas, Gamybos metai: 2024, mašinos/transporto priemonės numeris: 302340, Ring bending machine Manufacturer: KB Turkey Model: MB 30 Lower shaft: 30 mm Upper shaft: 30 mm 2 driven rollers With base frame for horizontal and vertical operation Bending capacity: Round tube up to 48 x 3.0 mm Flat bar (upright) 50 x 10 mm Square tube 40 x 40 x 3 mm Ppjdod S Uf Sepfx Ah Hel Weight: 170 kg Motor: 0.75 kW, 400 Volt, 50 Hz, 3 phase.

Sąlyga: naudotas, Gamybos metai: 1980, x-axis travel: 300 mm y-axis travel: 160 mm z-axis travel: 340 mm Tool holder: SK40 Podpew A Ap Hjfx Ah Hjpl Spindle speed: 40-2000 rpm Control: Heidenhain Aktiv Table size: 600 x 210 mm Total power requirement: 2 kW Machine weight: approx. 0.73 t Space requirement approx. (LxWxH): 1200 x 1100 x 1600 mm - Powered feed on X and Z axes - Röhm vise - Coolant system - Various holders and clamping devices - Operating manual

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, veikimo valandos: 100 h, Specializuojamės pūstuvų, kompresorių ir vakuuminių siurblių atnaujinime. Remontuojame tokių gamintojų įrangą kaip: Aerzen, Kaeser, Atlas Copco, Robuschi, Busch, Tuthill. Taip pat siūlome pūstuvų ir kompresorių nuomą. Veikiame visoje Europoje ir už jos ribų. Ppjdpfx Aon Tntqjh Hel

Sąlyga: geras (naudotas), Gamybos metai: 2016, mašinos/transporto priemonės numeris: PRJ052353, Pasiūlymas 25490 Techniniai duomenys: - Gręžimo galia pliene ST 60: 40 mm - Gręžimo pajėgumas pliene ST 60: 50 mm - Gręžimo veleno tvirtinimas: MK 4 - Gręžimo veleno eiga: 160 mm - Skaitmeninis apsukų indikavimas - Pasiekiamumas: 300 mm - Sukamas stalas su spaustuvu: 440 x 440 mm - Kolonos skersmuo: 145 mm - Pavaros automatinės, elektromagnetinės: 0,1 - 0,2 - 0,3 - 0,4 mm/aps. - Gręžimo veleno apsukos bepakopės su skaitmeniniu indikatoriumi: 200 - 3200 aps./min. - Pavara: 400 V / 1,8 / 2,9 kW - Apšvietimas - Elektrinis kojinis jungiklis - Užimamas plotas apytiksliai: P 650 x A 1900 x G 800 mm Psdpfsxy Hp Ajx Ah Hepl - Svoris apytiksliai: 470 kg

Sąlyga: geras (naudotas), Gamybos metai: 2004, TRAUB TX8H CNC Control System Weight: 3,500 kg Dimensions (L x W x H): 3960 x 1640 x 1800 mm Power: 11 kW Spindle Speed: 5,600 / 4,000 rpm Torque: 200 / 280 Nm The TRAUB TNA 300 lathe is designed for machining workpieces with a turning length of up to 450 mm. --> For precision metal and plastics machining with defined cutting edge, using appropriate tooling. --> Suitable for mounting in jaw chucks sized from 160 to approx. 250 mm --> For processing bar stock up to Ø 42 or 65 mm --> EHS special version: workpiece discharge unit --> Chip conveyor extended by 800 mm --> Technical Data Working Area Spindle bore: 42 mm --> Spindle nose DIN 55026, size: A5 --> Chuck diameter: 160–175 mm / 200–250 mm --> Maximum turning diameter: 275 mm --> Travel over spindle center: 35 mm --> Maximum turning length: 450 mm --> Swing diameter over compound slide: 395 mm Psdpfx Ajwwl Iueh Hjpl --> Swing diameter over bed: 520 mm --> Tool Turret Tool mounts for cylindrical shank per DIN 60880: 12 pcs --> Shank diameter: 30 mm --> Tool cross-section: 20x20 mm --> Indexing time (to station 1): 0.5 sec --> Indexing time (each additional station): 0.15 sec --> Feed drives X-axis: --> Travel: 210 mm --> Feed force: 5,000 N --> Rapid traverse/Path speed: 15 m/min --> Z-axis: --> Travel: 450 mm --> Feed force: 6,000 N --> Rapid traverse/Path speed: 18 m/min --> Y-axis: --> Travel: ±35 mm --> Feed force: 6,000 N --> Rapid traverse/Path speed: 10 m/min --> C-axis: --> Speed: 100 rpm --> Torque: 140 / 196 Nm --> Electric resolution: 0.001 degrees --> Tailstock Quill diameter: 70 mm --> Quill stroke: 60 mm --> Rapid withdrawal stroke: 280 mm --> Quill pressure at 55 bar: 8,600 N --> Socket per DIN 228: Mk 4 --> Steady Rest Clamping range: 8–95 mm --> Workpiece removal device Max. part length: 250 mm --> Max. part weight: 3 kg

Sąlyga: naujas, Motor power: 1.2 kW, 50Hz/400V Throat opening: Blade dimensions: 2450 x 27 x 0.9 mm Weight: 240 kg Cutting speed: 35 + 70 m/min Cutting capacity 0°: 220 / 210 x 150 / 230 x 185 mm Cutting capacity 45° right: Cutting capacity 45° left: 150 / 150 x 150 / 150 x 210 mm Cutting capacity 60° right: Cutting capacity 60° left: 90 / 90 x 90 / 90 x 100 mm Description: Pjdpfx Ahegrlapj Hopl The Zimmer Z241/R is a gravity-feed mitre saw for cuts from 0° to 60° to the left. After the cut, the machine stops automatically via a safety limit switch. The feed rate can be infinitely adjusted via the hydraulic system. Raising the saw arm after the cut can be done to any position; the saw arm remains locked in the desired position. The Z241/R comes equipped with: - Hydraulic cylinder - Coolant pump - Eccentric clamp - Base frame - Saw blade - 400V plug (16A) The machine is delivered fully assembled and ready for immediate operation. Footprint: 870 x 1550 x 1740 mm Working height: 915 mm Other configurations available on request.