CNC tekinimo staklės Hyundai WIA HD2600

Hyundai Hyundai WIA HD 2600

Būklė: dilaminuotas dirbtuvėje (naudotas), mašinos/transporto priemonės numeris: 550-235-ELD, GENERAL SPECIFICATIONS Maximum rolling diameter: 41 mm Max./min. module range: 1.5 / 0.39 Hnsdpfxjd Nw Tto Alren Maximum rolling width: 92 mm Maximum stroke of tool carriage: 760 mm Maximum rack length: 610 mm Max./min. diametral pitch: 20/40 – 32/64 Serial number: 550-235-ELD ELECTRICAL SPECIFICATIONS Main motor power: 15 HP

Būklė: geras (naudotas), Flat dies thread rolling machine, thread rolling machine, segmented thread rolling machine, cold forming machine, knurling machine, thread rolling machine - Manufacturer: EWM, flat dies thread rolling machine / knurling machine - Model: unfortunately without type designation Hnsdpfx Asi Eg Nkelren - Drive: 4.6/5.8 kW, 1435/2890 rpm - Belt drive: 3-step adjustable - Knurling plate: RAA 1.0 - Central lubrication - Dimensions: 1680/920/H1440 mm - Weight: 1,308 kg

Gamybos metai: 1960, būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 1733, Vertical internal broaching machine with index plate by Karl Klink Type: RSI10DT Machine No.: 1733 Hnodpfx Alegyd S Sjrsn Year of manufacture: 1960 Weight: 4.9 t Broaching force: 10,000 kg Equipped with index plate (2 stations) Power supply: 380V / 50Hz Rated current: 35 A Connected load: 7.5 kW The machine has been fully overhauled and is therefore in very good condition.

Būklė: naudotas, Each 1 set of thread rolling dies with a 63 mm bore M 12x1.5 M 16x1.5 M 18x1.5 Hnsdscn Tb Ejpfx Alren M 20x1.5 M 22x1.5 M 10x1 Diameter: 160 mm Roll width varies: 60, 70, 80 mm

Būklė: labai geros būklės (naudotas), Pressure: 50 t Throat depth: 245 mm Stroke: 14 / 90 mm Ram adjustment: 75 mm Table height adjustment: 150 mm Strokes per minute: 42/85 Table surface: 700 x 490 mm Ram surface: 400 x 230 mm Ram bore: 40 mm Table through-hole: 240 x 140 mm Die height with max. stroke up and ram adjustment up: 360 mm Total power requirement: 4 kW Hnodpjtrhf Asfx Alrjn Machine weight approx.: 3.41 t Required space approx.: 0.8 x 1.75 x 2.1 m The machine has been partially overhauled in our workshop as follows: - Disassembly, cleaning, and inspection - Table surface milled - New paintwork: machine in light gray/Enzian blue, ram assembly in orange - Shaft crack inspection carried out - Ortlinghaus KBK + additional brake dismantled, cleaned, inspected, new seals installed - Additional air accumulator - New control cabinet with safety control and touchscreen display - New machine wiring - New Vogel central lubrication system with piping (previously manual lubrication points) - New Herion press safety valve + maintenance unit - New Balluff cam switch - New two-hand control panel - New foot switch - Current accident prevention inspection (UVV) with brake time measurement - Machine safety for manual loading operations

Būklė: naudotas, Gamybos metai: 1991, Spaudimo galia 1.500 kN Hnsdpfx Aljrm Nqmjrsn Eigos reguliavimas 20 - 132 mm Stūmoklio reguliavimas maks. 90 mm Eigos dažnis 50 / 75 1/min. Papildoma informacija ir nuotraukos pagal užklausą Naudota, presas buvo visiškai išardytas Neveikia, būtinas mechaninis ir elektrinis remontas Šiuo metu presas vėl surinktas mechaniškai

Gamybos metai: 1991, būklė: paruoštas naudoti (naudotas), Range of slot widths: 2mm–32mm, max. ram stroke: 300mm, strokes per minute: 300, max. installation height: 450mm, feed: 0.01mm–0.15mm, working speed: 30m/min, return speed: 30m/min, machine dimensions (X/Y/Z): approx. 2500mm / 1500mm / 2200mm, weight: approx. 2200kg, control system: fk electronic Dialog CNC. On-site inspection is possible. Hjdpfxeu D Aage Alrjnn

Būklė: naudotas, Thread rolling machine, thread rolling head, segment thread rolling machine, cold forming machine, thread rolling head, rolling head Hnedpfx Aleu Tyvhsron - Manufacturer: BWF, Thread rolling head - Model: RK 12-20 - Thread rolls: M24 x 1.5 - Dimensions: Ø 120 x 180 mm - Weight: 5.6 kg

Būklė: naudotas, Gamybos metai: 1979, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 17065, Manufacturer: Henning Model: U6/1000 Machine No.: 17065 Year of Manufacture: 1979 Weight: 1,100 kg General / Technical Data: Used mechanical vertical broaching machine Henning, in operational condition Pulling force: 6,000 kg (60 kN) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / Working area: 600 x 460 mm / 480 x 340 mm Table opening: Ø 170 mm with eccentric table insert with Ø 90 mm hole for standard broaching mandrels (Rausch system) Workpiece diameter: unlimited Dimensions (H x W x D): 1,650 mm x 1,200 mm x 700 mm (H = table height from floor without superstructure) Motor: 7.4 / 10 kW Power supply: 380 Volt / 50 Hz Accessories / Special Features: - Integrated coolant system - Return circuit with dual-operation mode - Machine documentation - Automatic jaw opener in the lower pull bridge position (tool removal) - Tool clamping with universal jaws for flat shanks according to DIN 1416 BL 6 Hnedpfx Aeup Uzfolrjn Remarks: The machine is in its original condition, functionally tested. The machine is mechanically driven via a trapezoidal-thread spindle and a geared motor. Unlike most mechanically driven broaching machines where the trapezoidal spindle forms both the drive and guide element, this machine features additional guide columns. This ensures extra column guidance and very robust construction. The dual-spindle drive is ideal for continuously consistent cutting speeds, even at higher pulling forces. The machine is stored at our warehouse and can be inspected under power.

Būklė: labai geros būklės (naudotas), Slėgis 125 t Iškyša 400 mm Eiga 6 - 125 mm Presavimo stūmoklio reguliavimas 100 mm Montavimo aukštis (eiga apačioje, stūmoklio reguliavimas viršuje) 400 mm Stalo plotas 1100 x 750 mm Eigos skaičius 60 eigų/min Bendras galios poreikis 16 kW Staklių svoris apie 10 t Užimamas plotas apie IxPxA 1,1 x 1,9 x 3,53 m - Staklės dalinai atnaujintos Hnodet Eix Rspfx Alren - Visiškai išardytos ir technologiškai peržiūrėtos - Nauji sandarikliai - Nauja pneumatinė sankaba - Nauji sandarikliai kompensaciniame cilindre - Naujas pavaros variklis - Nauja rutulinė sraigtinė pavara - Naujas dažymas - Dabartinis UVV patikrinimas ir stabdymo laiko matavimas Staklės saugios rankiniams įdėklams Už papildomą kainą įrangą galime papildomai aprūpinti: - Darbo zonos apsauga su šviesos užtvara / cikliniu režimu, tik kartu su nauja (atskirai stovinčia) ABB saugumo valdymo ir lietimui jautrių ekranų valdymo spintele - Dviejų rankų valdymas ant atskiro stovo