Universalus apdirbimo centras

HURCO VCX600i XP

Būklė: naudotas, Gamybos metai: 2008, Technical details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 540 mm Turning length: 550 mm Longitudinal travel (Z-axis): 800 mm Cross travel (X-axis): 260 mm Control: Fanuc 18i-TB Spindle bore: Ø 73 mm Bar capacity: Ø 65 mm Spindle speed: 0 ... 5000 stepless rpm Spindle torque: max. 250 Nm Rapid traverse on X-Y-Z axes: X/Z: 30 m/min / Y: 12 m/min C-axis rapid traverse speed: 1000 rpm Tool turret - number of stations: 12 (Sauter) Operating pressure: 6.0 bar Electrical system - voltage/frequency: 3 x 400 V / 50-60 Hz Operating pressure: 6 bar Total power requirement: 40 kVA Machine weight approx.: 5.7 t Machine dimensions (LxWxH) approx.: 2.2 x 3.4 x 2.4 m Chip conveyor dimensions (LxWxH): approx. 2.9 x 0.6 x 0.55 (0.38 t) m Chip tray dimensions (LxWxH): approx. 1.6 x 1.3 x 0.25 (0.2 t) m Transport dimensions machine: approx. 3.3 x 1.9 x 2.2 m The machine features C-axis, E-axis, Y-axis, and W-axis. Driven tools possible in all turret stations. Iedpsvvtpxjfx Aggetn Distance spindle to sub-spindle = 1050 mm Sub-spindle: A2-6, travel 800 mm, spindle Ø 105 mm, torque 250 Nm Control cabinet equipped with Rittal cooling unit Including hinged belt chip conveyor Chip tray Compressed air gun Note: The machine is offered WITHOUT any chucks as shown!

Būklė: naudotas, Gamybos metai: 2012, Hasegawa PM 150 CNC Machining Centre TECHNICAL DATA Spindle Iedpfx Asu E El Ieggotn Spindle interface: HSK-E32 Speed: 100 – 30,000 rpm Spindle motor: 3.0 / 4.5 kW Tool Changer Capacity: 10 Tool-to-tool change time: 1.8 sec Travels X-axis: 150 mm Y-axis: 225 mm Z-axis: 200 mm 4th axis: Lehmann EA-507, 360° SCOPE OF DELIVERY Includes (not limited to): – Hasegawa PM 150 CNC machining centre – 10-position tool changer – Lehmann EA-507 rotary axis – Transformer – Fire suppression system – Complete operating documentation Exact scope of delivery according to photo series We do not accept liability for the correctness, completeness or currency of the information provided.

Gamybos metai: 2024, būklė: naujas, Universal testing machine H 5 TMNI (L) – 250mm Extended Version Mechanical structure: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free recirculating ball screws, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm Iodpoiq Hxvjfx Aggjtn 1 test space up to rated load: Test space width: 420 mm Max. test stroke without test fixtures, adapters, and KMZ: 1270 mm Max. test space height (between lower fixed and movable crosshead) without test fixtures, adapters, and KMZ: 1325 mm Travel speeds: Testing speed 0.001 – 1200 mm/min up to rated load Return speed 1200 mm/min Force measurement: Measuring range depending on the used load cell: 0.4 – 100 % of rated load, class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of force measurement depending on integration time between: +/-160,000 and +/-900,000 digits. The machine is supplied with a factory test certificate. If customer requests a factory or DAkkS calibration at the installation site, these costs must be calculated separately. Crosshead travel measurement: Incremental quadrature input with encoder monitoring, storage of the crosshead position Resolution of crosshead travel measurement:

Būklė: naudotas, TECHNINIAI DUOMENYS - Ašių skaičius: 5 FREZAVIMO VERPTUVĖ - Įrankio laikiklis: HSK63 - Verptuvės apsisukimų dažnis: 18000 [aps./min] - Verptuvės variklio galia: 25 [kW] LINIJINĖS AŠYS - Eiga X/Y/Z ašyse: 760 / 510 / 520 [mm] Iedpey Tzctofx Aggotn - Greitasis pavara (X/Y/Z): 45 / 45 / 40 [m/min] PASUKIMO AŠIS A - Eiga: -110 / +30 [laipsniai] PASUKIMO AŠIS C - Eiga: 360 [laipsnių] - Greitasis pavara: 25 [aps./min] ĮRANKIŲ KEITIKLIS - Įrankių keitiklio tipas: Bras chargeur - Įrankių skaičius žurnale: 40 STALAS - Stalo dydis: Ø248 [mm] - Maks. stalo apkrova: 200 [kg] ELEKTRINĖS TIEKIMO SISTEMA - Maitinimo įtampa: 400 [V] - Bendra galia: 48 [kVA] SVORIS IR MATMENYS - Užimama vieta: 3.940 x 4.060 [mm] - Staklių aukštis: 2.865 [mm] - Staklių svoris: 6000 [kg] PRIEDAI - Valdymas: Hurco WinMax / MAX5 - Teach-In programavimas - Elektroninis rankinis valdiklis - Aušinimo skysčio bakas * su aukšto slėgio siurbliu - Vidinis aušinimo skysčio tiekimas (IKZ) - Drožlių transporteriu - Verptuvės aušinimas

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Overhauled: 2024 Year of manufacture: 1994–2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Saw height adjustment: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed: 0 – 40 mm/s, continuously adjustable Cut length: 5–950 mm (9999 mm with multiple stroke) Feed rate max.: 500 mm/s Weight: approx. 1900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After the retrofit, the machine is in a like-new condition, both technically and visually. Thanks to its equipment and construction, the machine can be used very efficiently for a wide range of applications. The programmed HMI control ensures simple and highly profitable operation of the system. The soundproof cabin minimizes noise emissions. The machine is fully overhauled in-house according to customer requirements. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control Isdpfxouiy Hre Aggetn - Conversion to Siemens HMI operator interface - Replacement of ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul and/or replacement of all pneumatic cylinders - Renewal of valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additionally, the machine is equipped with: - Soundproof cabin - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor time and wear parts are excluded from the warranty. Optional equipment: - Mass clamping system for parallel sawing of multiple workpieces - Flat magazine for automatic feed of up to 6 m long bar stock - Roller conveyors for bar stock - Reinforced motor 18.0 kW (frequency-controlled) - Delivery and installation at your site - Training of your personnel

Gamybos metai: 1997, būklė: paruoštas naudoti (naudotas), Travel X/Y/Z: 1300mm/1100mm/1000mm, Table dimensions X/Y: 800mm/800mm, Number of pallets: 14, Maximum table load: 2200kg, Table indexing: 0.001°. Spindle speed: 7000rpm, Spindle power: 50HP, Tool magazine: 80. Dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, Weight: approx. 24000kg. An on-site inspection is possible. Itjdpfx Aotx Dn Ueggjn

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2019, X-axis: 620mm, Y-axis: 520mm, Z-axis: 460mm, B-axis: -50° to +110°, C-axis minimum increment: 0.001°, Distance spindle nose to table surface (B/C axes): 140–600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots (number/width/spacing): 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000 rpm, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feedrate: 1–10m/min, rapid traverse B/C axis: 25/min, tool holder: MAS BT-40, number of tool stations: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa/500l/min, coolant tank capacity: 420l, total connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, control operating hours: 9380h, machine-on: 9501h, program run: 3141h, hydraulics: 8371h, axes: 1863h, spindle S1: 2377h. Equipment: Roller guides in all 3 linear axes (Taiwan make), spindle chiller, hydraulic unit, central lubrication system, oil separator, water gun, air gun, full enclosure, machine light and warning light, M30 machine shutdown, air-conditioning for electric cabinet, chip conveyor (scraper type), chip bin, work area rinsing device, tailstock support for rotary table, roller guides in all 3 linear axes, CE compliant version, through-spindle coolant (IKZ), linear scales X/Y/Z Heidenhain, workpiece measuring probe, transformer, oil mist extraction, collision protection software, spindle thermal compensation, with documentation. On-site inspection possible. Itedpfx Agozavyfjgjn

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2014, X ašies eiga: 1 067 mm, Y ašies eiga: 610 mm, Z ašies eigos atstumas: 610 mm, bendras svoris: 6 850 kg, įrankių magazino lizdų skaičius: 24, ašių skaičius: 3, Šis 3 ašių „Hurco VMX 42i“ staklės pagamintos 2014 m. ir pasižymi 1067 mm X ašies eiga, 610 mm Y ašies eiga bei 610 mm Z ašies eiga; įrengtos SK40 tipo įrankio laikiklis. Jei ieškote aukštos kokybės frezavimo galimybių, apsvarstykite galimybę įsigyti mūsų parduodamą „Hurco VMX 42i“ staklę. Susisiekite su mumis, jei norite gauti daugiau informacijos. • Velenų darbo valandos: apytikriai 12 603 val. • Bendras reikalingas galingumas: apytikriai 28 kVA Isdey Tw Ryjpfx Aggetn Papildoma įranga • Skiedros konvejeris • Vidinė aušinimo skysčio sistema • su giliųjų skylių gręžimo ciklo funkcija Technical Specification Taper Size SK 40

Būklė: geras (naudotas), Gamybos metai: 2011, Ref. No.: 10598 Manufacturer: HELLER Model: MC 2000 Year of manufacture: 2011 Control type: CNC control Controller: Siemens 840 D sl Location: Halberstadt Country of origin: Germany Machine No.: 50XXXX X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 1000 mm Working spindle torque (at 25% DC): 242 Nm Tool holder: SK 40 Number of tool stations in magazine: 54 Tool magazine equipped with: 80 pcs. Spindle speed: 10,000 rpm Main spindle drive power: 17 kW High-pressure pump: 50 bar Main spindle speed range: 10,000 rpm Number of pallets: 2 Pallet size (LxW): 630 x 500 mm Machine weight approx.: 13,000 kg Ijdpfjx Hn D Rjx Aggjtn Spindle hours: 7,000 h Operating hours: 14,000 h Set-up stations: 4 x 90° Hydraulic pressure: 200 bar Additional information: - Machine has been measured - Geometry is in excellent (1A) condition - Spindle runs somewhat rough - Clamping towers and tool holders included - 2 additional clamping towers - 2 spare pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in work area - Central cooling unit for motor spindle and electrical cabinet - Operator panel at the set-up station - NC-controlled rotary table - Clamping hydraulics Machine can be inspected under power by arrangement.

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2000, plieno lakšto storis (maks.): 16 mm, galinis atmušas: 1 000 mm, pjovimo ilgis (maks.): 3 150 mm, Foot switch motorized backgauge cutting angle adjustment Technical data / technical details: Max. cutting capacity: 16 mm Max. cutting length: 3150 mm Backgauge: 1000 mm Itsdpfxsv Syyve Aggon Machine weight: 16,300 kg Technical data, accessories, and description of the machine are not binding.